Upgradation of Swathi Thirunnal Kalakendram Thiruvannur Kozhikode II Phase

Amount

Dismantling roofing including ridges, hips, velleys and gutters etc, and stacking the material within 50 metres lead of G.S Sheet.

Providing corrugate G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limper washers filles with white lead , including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required (0.50mm thick with zinc coating not less than 275 gm/m2)

Providing ridges or hips width 60cm overall width plain G.S sheet fixed with polymer coated JorL hooks , bolts and nuts 8mm dia G.I limpet and bitumen washers complete (0.50mm thick with zinc coating not less than 275gm/m2)

Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS: 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450mm centre to centre and fixing the frame work to G.I level adjusting hangers 6mm dia, with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for seperately.

Providing PVC eave guttering of size 150mm including iron clamp screw etc. complete (square type)

Providing and fixing false ceiling with 9mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid seperately)

Solid block masonry using pre cast solid blocks (Factory made ) of size 30x20x15 cm or nearest available size conforming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in:CM 1:6 (1cement:6 coarse sand) etc complete

12mm cement plaster of mix 1:4 (1cement : 4 coarse sand )

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and mooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content : with water thinnable cement primer on walls surface having VOC content less than 50 grams/ litre

Wall painting with acrylic emulsion paint of approved brand and manufacturer to give an even shade. Two or more coats on new work.

Supplying and fixing Granite sign board