Providing Cubicles and aluminium partition at newly constructed additional rooms under Mahalaxmi area .

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in- charge.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5 mm thick

Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge,

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.100mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providingand fixing inter lock of Godrej or equivalent approvedmake necessary screw fixing as per instruction of EIC.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm

Electrical Portion:-Supplying & fixing of 75mm x 75mm x 60mm deep (nominal) surface PVC junction box with cover plate as reqd.

Supplying & fixing of 3mm thick phenolic laminated sheet of size (250mm x 150mm) on the existing PVC / G.I. box as reqd.

Supplying & fixing of 3 pin 5 amp ceiling rose on the existing junction box / wooden block including connection etc. as reqd.

Supplying & fixing of 4 module (125mm x 75mm) surface PVC box alongwith modular base & cover plate for modular switch / socket in surface as reqd.

Supplying & fixing of 6 module (200mm x 75mm) surface PVC box alongwith modular base & cover plate for modular switch / socket in surface as reqd.

Supplying & fixing of 12 module (200mm x 150mm) surface PVC box alongwith modular base & cover plate for modular switch / socket in surface as reqd.

Supplying & fixing of 3 pin 5/6 amps modular socket outlet on the existing modular plate & switch box including connection but excluding modular plate etc. as reqd.

Supplying & fixing of 5/6 amps modular switch on the existing modular plate & switch box including connection but excluding modular plate etc. as reqd.

Wiring for circuit / sub-main wiring alongwith earth wire with 2 x 1.5 sq. mm. + 1 x 1.5 sq. mm. earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.

Wiring for circuit / sub-main wiring alongwith earth wire with 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.

Wiring for circuit / sub-main wiring alongwith earth wire with 2 x 4.0 sq. mm. + 1 x 4.0 sq. mm. earth wire FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.

Supplying and fixing of 8-way, single pole and neutral, sheet steel, MCB distribution board, 240 volts on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)

Supplying and fixing of 4-way (4+12), double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as reqd. (But without MCB / RCCB / Isolator).

Supplying & fixing of 5 amps to 32 amps rating, 240/415 volts, 10kA "C" curve miniature circuit breaker suitable for inductive load (single pole) in existing MCB DB complete with connections, testing and commissioning etc. as reqd.

Supplying & fixing of 40 amps rating, double pole, 240 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.

Supplying & fixing of 63 amps rating, Three pole, 415 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.

Supplying & fixing of 63 amps rating, four pole (three phase and neutral), 415 volts RCCB having a sensitivity current upto 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

Please Enable Macros to View BoQ information