Construction of Bishnu Rabha Cultural Multi Complex at Doulchuba, Dist - Udalguri

Amount

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidatingeach deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

52 mm thick cement concrete flooring with concrete hardener topping. under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume. hardening compound mixed@ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and fixing glass strips in joints of terrazol cement concrete floors. 40 mm wide and 4 mmthick

Cement plaster skirting up to 30 cm height. with cement mortar 1:3 (1 cement. 3 coarse sand), finished with a floating coat of neat cement. 18mmthick

Providing and applying white cement based putty of average - thickness 1 mm, of approved brand and manufacturer. over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including prill1il'l9 coat of exterior primer applied @2.20 kg/10 sqml.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work L

Providing and fixing aluminium sliding door bolts, lSI marked anodised (anodic coating not less than grade AC 10 as per IS 1868), transparent or dyed to required colour or shade. with nuts and screws etc. complete: 18 9.96.1 300x16 mm

Providing and fixing aluminium tower bolts, lSI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: . 20 9.97.1 300x10 mm

Providing and fixing aluminium handles, lSI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125mm each

Supplying fabrication and erection of trussless roof to be fixed in SCHEOUL R.C.C beam with necessary screws, bolt etc with 1.2 mm thick, 250 - E to 350 mpa self corrogated roofing sheet, including necessary arrangement for fitting fixing and complete in all respect as specified and directed.

Providing & fixing AEROLAM or equivalent 19mm cross linled !SCHEDUL closed cell polyethylene foam insulation sheet having nominal Density 30 ± kg/cum, Thermal Conductivity: 0.0382 w/mk, DIN 52615, Fire characteristics as per BS 476 part 7, self extinguishing. non toxic sheets including necessary arrangement and stationeries for fitting fixing and complete in all respect as specified and directed.

Internal Electrificatation Works - 9 % of Civil Works (Phase I & Phase II) (Appx Rs. 4824694.00)

NELSON BASUMATARY

CHANDAN CHOUHAN