Renovation and furniture work of Center for Excellance building of Cyber Crime at Airforce Campus, Sector-9, Gandhinagar, Dist. Gandhinagar. (Including Electrification)

SCHEDULE -B WITH RATE

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

1 2571.00 Smt 49.61 Rupees Fourty Nine and Paisa Sixty

Dismentaling tiled or stone floors laid in mortar including stacking of serviceable material and disposal of unserviceable material with all lead and lift.

2 Demolition & disposal of unserviceable materials with all lead and lift. (II) reinforcement cement concrete. 18.00 Cmt 1099.75 Rupees One Thousand Ninety Nine

and Paisa Seventy Five Only

3 Demolition & disposal of unserviceable materials with all lead and lift. (II) Unreinforcement cement concrete. 91.00 Cmt 633.39 Rupees Six Hundred Thirty Three

and Paisa Thirty Nine Only

4 Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift (ii) Cement 224.00 Cmt 572.20 Rupees Five Hundred Seventy Two

mortar and Paisa Twenty Only

5 Dismentaling doors, windows, vetilators etc. (wood or steel) shutters including chokthas, architraves, holdfast and other attachment etc.complete and stacking 364.00 No. 261.29 Rupees Two Hundred Sixty One

the material with all lead and lift. (ii) exceeding 3 smt in area. and Paisa Twenty Nine Only

6 84.00 No. 421.71 Rupees Four Hundred Twenty One

Dismantaling sanitary fiting like wash basin , w.c. pan indian europeaan type, flushing tank etc including stacking the material with all laed and lift. and Paisa Seventy One Only

7 1148.00 Rmt 77.73 Rupees Seventy Seven and Paisa

Dismetaling c.i. pipes, g.s.w pipes and a.c. rain water pipes with fitting and clamp including stacking the materials with all lead and lift(for any diameter of pipe)

Seventy Three Only

8 Dismantling alluminium partition asbestos Hard board in ceiling or partition walls, wooden trellis work including frames, stacking of the serviceable materials and 383.00 Smt 30.00 Rupees Thirty Only

disposal of unserviceable materials with all lead and lift

9 Credit Value for Door Shutter, Cupboard shutter and removed from site and clean site. 196.00 No. -400.00 Rupees Four Hundred Only -78400.00

10 Credit Value for Window and removed from site and clean site. 168.00 No. -300.00 Rupees Three Hundred Only -50400.00

11 Credit value for old G.I. Pipe of any dia meter and removed from site and clean site. 1148.00 Rmt -15.00 Rupees Fifteen Only -17220.00

12 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggrigates of 40 mm nominal size) curing complete including cost of 99.00 Cmt 2732.02 Rupees Two Thousand Seven

formwork in FOUNDATION AND PLINTH. Hundred Thirty Two and Paisa Two

13 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq cm. In super structure above plinth level upto floor two 155.00 Cum. 4458.23 Rupees Four Thousand Four

level. Conventional bricks in cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for GROUND FLOOR Hundred Fifty Eight and Paisa

Twenty Three Only

14 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq cm. In super structure above plinth level upto floor two 12.00 Cum. 4499.93 Rupees Four Thousand Four

level. Conventional bricks in cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for FIRST FLOOR Hundred Ninety Nine and Paisa

Ninety Three Only

15 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) 84.00 Smt 679.00 Rupees Six Hundred Seventy Nine

conventional bricks for Ground Floor. Only

16 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) 84.00 Smt 685.24 Rupees Six Hundred Eighty Five

conventional bricks for First Floor. and Paisa Twenty Four Only

17 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including 881.00 Smt 209.88 Rupees Two Hundred Nine and

finishing with a floating coat of neat cement slurry at GROUND FLOOR. Paisa Eighty Eight Only

18 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including 383.00 Smt 236.99 Rupees Two Hundred Thirty Six and

finishing with a floating coat of neat cement slurry at FIRST FLOOR. Paisa Ninety Nine Only

19 Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior plastering and finished even and smooth in cement mortar 1:4(1- 2740.00 Smt 213.51 Rupees Two Hundred Thirteen and

cement;4-sand) including finishing with a floating coat of neat cement slurry at Ground Floor. Paisa Fifty One Only

20 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 640.00 Smt 242.77 Rupees Two Hundred Fourty Two

sand ) including finishing with floating coat of neat cement slurry at FIRST FLOOR. and Paisa Seventy Seven Only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

21 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm 669.00 Smt 312.56 Rupees Three Hundred Twelve

thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.sand faced Plaster Shall Be Carried Out By Using gutaka only and Paisa Fifty Six Only

22 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Heptachloride 20 EC. As Per 2790.00 Smt 90.72 Rupees Ninety and Paisa Seventy

6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration Two Only

will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S code

23 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for jambs and sills of doors & windows using neat cement slurry laid over 20 mm average base 343.00 Smt 2428.00 Rupees Two Thousand Four

of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and Hundred Twenty Eight Only

tackles,scaffolding etc. complete(with base of neat cement) as per direction of Engineer in charge including rounding the exposed edges as directed.

24 Providing and laying Telephonic Black Granite 18mm thick STONE SLAB FLOORING over 20mm average thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) 311.00 Smt 2158.45 Rupees Two Thousand One

Hundred Fifty Eight and Paisa

laid over & jointed with grey cement slurry including rubbing & polishing etc. Complete.for all floor. Fourty Five Only

25 Provinding and Laying 18 mm thick Granite stone slab in Skirting / Dado over 10mm thick average base of C.M. 1:3 (1:cement :3 coarse sand) laid and jointed with 42.00 Smt 2363.47 Rupees Two Thousand Three

Hundred Sixty Three and Paisa

grey cement slury including Rubbing and Polishing etc. Complete for All Floors. Fourty Seven Only

26 Provinding & laying 24" x 24" vitrified 8mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing 298.00 Smt 1453.19 Rupees One Thousand Four

on existing flooring by adhesive material including dismentaling of existing flooring and material jointed with color cement slurry including finised with flush Hundred Fifty Three and Paisa

pointing & cleaning the surface etc. complete for antiskid. size and shade of tiles shall be as per approved architecture drawing and as per direction of engineer-in- Nineteen Only

charge. For all Floor.

27 Provinding & laying Printed / Coloured GLAZED TILES 8mm thick in skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand 1144.00 Smt 1498.30 Rupees One Thousand Four

) & jointed with white cement slurry. size and shade of tiles shall be as per approved architecture drawing and as per direction of engineer-in-charge for all floors. Hundred Ninety Eight and Paisa

(Size of Tile shall be 600 x 300mm) Thirty Only

28 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 14.00 Rmt 3758.34 Rupees Three Thousand Seven

25 mm thick rough kota stone at bottom and 25 mm thick Polish Granite stone ( single piece/ telephonic Black ) top and polished granite stone (single piece/ Hundred Fifty Eight and Paisa Thirty

telephonic Black ) 25mm thick on top with 15mm high machine cut polished granite round moulded facia patty including polishing etc . complete as per drawing Four Only

and specification without stainless steel sink including necessary cutting for sink & making hole for gas pipe and fixing P.V.C bend of 25mm dia.

29 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on 796.00 Sqm. 1580.10 Rupees One Thousand Five

Hundred Eighty and Paisa Ten

new surface orfixing on existing flooring by adhesive including dismentaling of existing flooring and material jointed with color cement slurry including finised Only

with flush pointing & cleaning the surface etc. complete for all Floors. Material shall be used as per approved make list by GSPHCL.

30 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile Skirting riser of Step and Dedo On 10mm Thick Cement plaster mortar 1:3 ( 1 cement: 60.00 Sqm. 1371.30 Rupees One Thousand Three

3 coarse sand) & Jointed with Colour Cement Slury including finised with flush pointing & cleaning the surface etc. complete for all Floors. Material shall be Hundred Seventy One and Paisa

used as per approved make list by GSPHCL. Thirty Only

31 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be 44.00 No. 5470.90 Rupees Five Thousand Four

fixed on S.S heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are inclusive of all matreials, Labour & Hundred Seventy and Paisa Ninety

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wall Hung & Only

Flush Tank Shall be as per the Approved Make List of GSPHCL.

32 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle 42.00 No. 3935.33 Rupees Three Thousand Nine

Trap with Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Hundred Thirty Five and Paisa

Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wash Basin Shall be as per the Approved Make List of Thirty Three Only

33 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of 10.00 No. 2132.80 Rupees Two Thousand One

all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Hundred Thirty Two and Paisa

Make of Urinal Shall be as per the Approved Make List of GSPHCL. Eighty Only

34 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 44.00 No. 261.16 Rupees Two Hundred Sixty One

25mm dia. and Paisa Sixteen Only

35 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, 44.00 No. 1309.39 Rupees One Thousand Three

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make List of G.S.P.H.C.L. Hundred Nine and Paisa Thirty

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

36 Providing & Fixing Health faucets (ABS body). Rate are inclusive of all materials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, 44.00 No. 565.51 Rupees Five Hundred Sixty Five

Specifications and as per the Instruction of Engineer In Charge. The Model & Make of Health Faucets shall be as per the Approved Make List of GSPHCL. and Paisa Fifty One Only

37 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, 30.00 No. 990.61 Rupees Nine Hundred Ninety and

Specifications and as per the Instruction of Engineer In charge. The Model & Make of 15mm One way Bib Tap Shall be as per the Approved Make List of Paisa Sixty One Only

38 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange . Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 10.00 No. 1330.32 Rupees One Thousand Three

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Sink Cock Shall be as per the Approved Hundred Thirty and Paisa Thirty

Make List of GSPHCL. Two Only

39 Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin Finish Kitchen Sink of over all Minimum size 533mm x 457mm x 203mm deep having bowl 10.00 No. 3695.00 Rupees Three Thousand Six

Minimum size 470mm x 395mm x 203mm Finishing with cement mortar 1:3 (1-Cement : 3-Fine Sand) etc. Complete. Rate including of 32mm dia. C.P. Brass Waste Hundred Ninety Five Only

Coupling and 32mm dia. Rigid PVC Waste Pipe upto N.T. (S.S. Kitchen Sink Shall be of Nirali, Navkar, Carysil or Krishna make Only) for ALL FLOORS.

40 Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 6mm thick A.C. sheet of plywood sheet fixed to wooden plugs with 42.00 No. 850.90 Rupees Eight Hundred Fifty and

C.P. brass screws & washers. Paisa Ninety Only

41 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the 42.00 No. 909.08 Rupees Nine Hundred Nine and

Instruction of Engineer In charge. The Model & Make of Towel Ring Shall be as per the Approved Make List of G.S.P.H.C.L. Paisa Eight Only

42 Providing & Fixing Towel Rack. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per 42.00 No. 3343.63 Rupees Three Thousand Three

the Instruction of Engineer In charge. The Model & Make of Towel Rack Shall be as per the Approved Make List of GSPHCL. Hundred Fourty Three and Paisa

Sixty Three Only

43 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE having national sanitation foundation (NSF) seal for potable 170.00 Rmt 206.73 Rupees Two Hundred Six and

waterof following dia nominal bore tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [B] 20 mm inner dia. Paisa Seventy Three Only

44 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE having national sanitation foundation (NSF) seal for potable 440.00 Rmt 251.31 Rupees Two Hundred Fifty One and

waterof following dia nominal bore tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [C] 25 mm inner dia. Paisa Thirty One Only

45 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE having national sanitation foundation (NSF) seal for potable 914.00 Rmt 443.29 Rupees Four Hundred Fourty Three

waterof following dia nominal bore tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [C] 40 mm inner dia. and Paisa Twenty Nine Only

46 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE having national sanitation foundation (NSF) seal for potable 100.00 Rmt 654.04 Rupees Six Hundred Fifty Four and

waterof following dia nominal bore tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [C] 50 mm inner dia. Paisa Four Only

47 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or 652.00 Rmt 256.81 Rupees Two Hundred Fifty Six and

double 'Y' with door, reducer, coupler single 'T' with door bend, including All Labour Charges etc. complete and making good the Wall, Ceiling and Floor, ISI make Paisa Eighty One Only

only. Joints shall be sealed by pipe sealant. Including Z-patti.

48 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or 652.00 Rmt 485.22 Rupees Four Hundred Eighty Five

double 'Y' with door, reducer, coupler single 'T' with door bend, including All Labour Charges etc. complete and making good the Wall, Ceiling and Floor, ISI make and Paisa Twenty Two Only

only. Joints shall be sealed by pipe sealant. Including Z-patti.

49 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -75 mm diameter with jali of the following nominal diameter of self cleaning design with C.I scread 108.00 No. 593.70 Rupees Five Hundred Ninety Three

down or hinged grating including the cost cutting and making good the wall. 100mm drain. and Paisa Seventy Only

50 Providing and fixing aluminum openable window having frame of Jindal cat. No.20707 having weight 0.593kg/rmt and shutter of Jindal cat. No.20843 having 81.00 Sqm. 3716.09 Rupees Three Thousand Seven

weight 0526kg/rmt incluidng fititngs complete as per detail drawing and directed by engineer in charge. Rate are inclusive of all material, labour etc. complete. Hundred Sixteen and Paisa Nine

51 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094Kg / Rmt with colour 81.00 Sqm. 1509.90 Rupees One Thousand Five

anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for Fix window Hundred Nine and Paisa Ninety

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

52 Providing and fixing Alluminium section window having extruded Aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal 126.00 Smt 1902.50 Rupees One Thousand Nine

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical Hundred Two and Paisa Fifty Only

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with

5 mm thick transparent bronze colour tinted float glass with colour anodized aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details including one mosquitoe jali shutter With Both Side Locking Arrangment

53 Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434,@Wt.0.643 kg per mt) with colour 28.00 Sqm 1163.92 Rupees One Thousand One

anodized alluminium frame for ventilation with 5mm thick frosted glass as details etc complete for VENTILATION. Hundred Sixty Three and Paisa

Ninety Two Only

54 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Construction of 233.00 Smt 8399.74 Rupees Eight Thousand Three

Flush Door is with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush Door Hundred Ninety Nine and Paisa

Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with Seventy Four Only

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack of biological agent

like termite, borers, decay, fungi and harmful insects also warranty against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter

shall be press by cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No

of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm

Long X 10mm thick. Door are Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material Make List of

G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

55 Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer rigid PVC foam sheet(single Extruded) with density not less than 131.00 Smt 4514.20 Rupees Four Thousand Five

600kg/cbm outer layer (0.8-1mm)thick should be rigid PVC with density of not less than 1400kg/cbm. Door should be water proof,Termite proof ,fire Hundred Fourteen and Paisa

retardant&having good screw holding capacity.proviidng and fixing 100% Solid Wood Plastic composite(WPC) Door Frame 90mmx45mm made from wood plastic Twenty Only

composite(single Extruded Process)material with density 780kg/cbm .all as per specifications drawing as directed by the engineer in charge.

56 Full Glass Door on Patch Fitting Providing and fixing glass door with patch fitting door as shown in the drg. Door shall consist of make 12mm thk. toughened 11.00 Smt 6210.19 Rupees Six Thousand Two Hundred

clear float glass. Rate shall include necessary designer film, approved locking systems, SS Handle pair, floor springs (Heavy duty or equivalent), gaskets & Ten and Paisa Nineteen Only

miscellaneous hardware items. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant.

57 Supply and Installation of Straight Glass Partition Material (12mm thick toughened glass) 10.00 Smt 6803.85 Rupees Six Thousand Eight

1) Full glass wall partitions will be made of 12mm toughened glass with frame-less structure. Proper structure shall be made to ensure the fixing of glass from RCC Hundred Three and Paisa Eighty

slab above false ceiling and flooring. Five Only

2) Straight and vertical structural members shall not be visible . Glass shall be fitted on extrusion with tool less technology and having a provision for replacing

glass with perforated sheet/acoustic tile by removing the glass.

3) NOTE: - The nature of installation should be replaceable, expandable and flexible to cater the future expansion/technical up-gradation.

58 Removing existing PVC flooring and Providng & fixing 2mm thick PVC flooring on existing vitrified flooring surface. Rates are inclusive of proper cleaning the 2554.00 Smt 915.68 Rupees Nine Hundred Fifteen and

surface after removing existing flooring, labour, all necessary materials, adhesive etc. complete for all floors as per the direction of Engineer in charge. Paisa Sixty Eight Only

59 Gypsum False Ceiling Providing and fixing gypsum board ceiling as per manufactures' specifications incl. acrylic paint. Fixing of suspended 462.00 Smt 1310.83 Rupees One Thousand Three

gypsum plain false ceiling by using standard company section (GYPSTEEL ULTRA), which includes providing and fixing G.I. parameter channels of size 20 X 28 X 30 Hundred Ten and Paisa Eighty

X 0.55 mm thick having one flange of 20 mm and another flange of nylon sleeves and screws at 610 mm center. Then suspending G.I intermediate channels of size Three Only

15 X 45 X 15mm, 0.9 mm thick fixed with two flanges of 15 mm each from the sophist at 1220 mm center with ceiling angle of width 25 mm x 10 mm x 0.55 mm

thick fixed to sophist with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55 mm. thickness having knurled web of 51 mm. and two flanges of 26 mm

each with lips of 10.5 mm. area then fixed to the intermediate

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

channel with the help of connecting clips and in direction perpendicular to the intermediated channel at 457 mm. center 12.5 mm tapered edge gypsum board Rupees Six Hundred Fifty Six and

(conforming to is 2095-1982) is then screw fixed to ceiling section with 25 mm drywall screws at 230 mm center. Screws fixing is done mechanically either with Paisa Eighty Six Only

screwdriver or drilling machine with suitable attachment. Standard company manufactured section (GYPSTEEL ULTRA) should be used for the entire framework.

Finally the board are to be jointed and finished, so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with

jointing compound, paper tape and two coats of primer suitable for Gyp-board (as per recommended practices of India Gyproc - Saint Gobain make). (also

including application of primer and preparing surface even & sand papered smooth with lapi, astar...) Including three coats with plastic emulsion paint of

approved brand & manufacture. Including all materials and labour etc. complete as per detof all Labors & Proviging 15cm. Long 8 No of Hold

60 Cluster (Work station ) (1.37 x 0.69 x 0.76) Providing and fixing Cluster (Workstation) as per drawing, Framing the skeleton with 19mm + 19mm thick vertical and 186.00 No. 16620.40 Rupees Sixteen Thousand Six

horizontal plywood patti both side cover with 6mm for grooving design and finishing with selected laminate. Before installation, make hole/face plate for conduit Hundred Twenty and Paisa Fourty

pipes of electrical/networking cables with openable stud from horizontal partition. Vertical support of 19mm + 19mm thick double plywood cover with 1mm Only

laminate finish including teakwood bidding on exposed edges with melamine polish. Fitted 25mm thick (plywood interior grade) post forming laminated top, fixed

with metal clamps including suspended metal keyboard-mouse tray fixed with telescoping channel, cable manager and seperate Drawer unit box (0.65 x 0.41 x

0.43) with wooden bidding patti on nylon castors with lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and 0.8mm

inside laminate as well as approved shade for Left or Right side. Providing and fixir installation. 3.Following printed marking Manufacturing Date and Expiry Date

must be mention on Extinguisher 4. Refilling

61 Table: Size: (2.40 x 0.90 x 0.76) Providing and fixing 38mm thick (plywood interior grade) post forming laminated top in approved shade with telescopic 5.00 No. 35809.84 Rupees Thirty Five Thousand Eight

suspended metal keyboard with mouse tray with 57mm vertical legs made by plywood with exterior side 1mm and interior side 0.8mm approved laminate. Hundred Nine and Paisa Eighty

Appron should be made from plywood with laminated finish as per detail drawing, seperate Drawer unit box (0.65 x 0.41 x 0.43) with wooden bidding patti on Four Only

nylon castors with lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as 19mm

post forming Outside of shutter with Auto hinges of HAFELE or equivalent and drawer should made from 19mm post forming laminated in approved shade and

CPU Trolley should be supplied of metal powder coated, Footrest (0.91 x 0.30) should be from 19mm plywood with 1mm laminated finish in approved shade. Fix

12mm toughen frosted glass in front of the table and fixing the courian top having size of 4'0" x 2'0" as per given drawing of the table top. Including all materials

and labour etc. complete as per detail drawing and instruction of engineer-in charge.

62 Table: Size: (2.10 x 0.90 x 0.76) 8.00 No. 33790.47 Rupees Thirty Three Thousand

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The Seven Hundred Ninety and Paisa

plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with Fourty Seven Only

melamine polish finish of approved shed.The Rate includes the cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs

made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per

detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish

complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved

shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel. Fix 12mm toughen frosted glass in front of the

table and fixing the corian top having size of 4'0" x 2'0" as per given drawing of the table top. Rate includes the cost of all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.

63 Table: Size: (1.83 x 0.90 x 0.76) 6.00 No. 18679.54 Rupees Eighteen Thousand Six

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The Hundred Seventy Nine and Paisa

plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with Fifty Four Only

melamine polish finish of approved shed.The Rate includes the cost of fixiing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs

made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per

detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish

complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved

shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the cost of all materials and labour

etc. complete as per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

64 Table: Size: (1.52 x 0.76 x 0.76) Providing and fixing 25mm thick (plywood interior grade) post forming laminated top in approved shade with telescopic 46.00 No. 16622.62 Rupees Sixteen Thousand Six

suspended metal keyboard with mouse tray with 38mm vertical legs made by plywood with exterior side 1mm and interior side 0.8mm approved laminate. Hundred Twenty Two and Paisa

Appron should be made from plywood with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated, Footrest (0.75 x Sixty Two Only

0.37) should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) with wooden bidding patti on nylon castors with

lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or

Right side. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.

65 Side Table: Size: (1.07 x 0.46 x 0.69) Providing and fixing 25mm thick (plywood board, interior grade) post forming laminated top with 6mm thick plywood 5.00 No. 14552.22 Rupees Fourteen Thousand Five

at backside in approved laminate shade, made out of 19mm thick plywood with exterior side 1mm and interior side 0.8mm approved laminate, Drawer unit box Hundred Fifty Two and Paisa

(measurement shown in drawing) with wooden bidding patti, lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and Twenty Two Only

0.8mm inside laminate as well as 19mm post forming Outside of shutter with Magnet, Multiple drawer lock, S.S. Legs (75mm height) in bottom, Auto hinges of

HAFELE. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.

66 Side Table: Size: (0.91 x 0.46 x 0.69) Providing and fixing 25mm thick (plywood board, interior grade) post forming laminated top with 6mm thick plywood 60.00 No. 12056.21 Rupees Twelve Thousand Fifty Six

at backside in approved laminate shade, made out of 19mm thick plywood with exterior side 1mm and interior side 0.8mm approved laminate, Drawer unit box and Paisa Twenty One Only

(measurement shown in drawing) with wooden bidding patti, lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and

0.8mm inside laminate as well as 19mm post forming Outside of shutter with Magnet, Multiple drawer lock, S.S. Legs (75mm height) in bottom, Auto hinges of

HAFELE. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge . (Ref. Dwg. No. )

67 Providing and supplying High back leatherette / black mesh fabric chair as per approved brand and model. (Brand and model as per HOF-Model-Marco 1001 / 17.00 No. 12482.10 Rupees Twelve Thousand Four

Godrej-Model-THRILL HIGH BACK / Wipro-Model-Define / Featherlite-Model-Halix HB / Merrifare-Model-Wau HB) Hundred Eighty Two and Paisa Ten

68 Providing and supplying Medium back chair for Staff as per approved brand and model. (Brand and model as per HOF-Model-Cati / Godrej-Model-Pulse / Wipro- 289.00 No. 10465.00 Rupees Ten Thousand Four

Model-That's It / Featherlite-Model-Amaze Project / Merrifare-Model-Nez or Equivalent) Hundred Sixty Five Only

69 Providing and supplying Medium back chair for Staff Visitor as per approved brand and model. (Brand and model as per HOF-Model-Sitra-L-Fix / Godrej-Model- 163.00 No. 8222.50 Rupees Eight Thousand Two

Oxbo Visitor / Wipro-Model-Carbon / Featherlite-Model-Astro Visitor / Merrifare-Model-Nez (Fix) or Equivalent) Hundred Twenty Two and Paisa

70 Three Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 50mm x 50mm sq. metal furniture pipe section created necessity 2.00 No. 26231.05 Rupees Twenty Six Thousand Two

support for 3 seaters sofa. Seat support also been in same metal section. In the metal section, the finished seating must be 0.78mm length x 0.53mm width. 3 Hundred Thirty One and Paisa Five

Seater also created. then Z-Section spring use and on top 4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per Only

selected sample. At back support also 0.53mm width x 0.74 mm for 3 seater back, fitted with 2''.0' rubber cushion with 25mm U-Foam with 32 density

appropriate 3'' angle support, also done finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe finish with legs and

handle support also as shown in drawing to create decoration and strengthening support. Including all materials and labour etc. complete as per detail drawing

and instruction of engineer-in charge.

71 Two Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 50mm x 50mm sq. metal furniture pipe section created necessity 1.00 No. 17802.66 Rupees Seventeen Thousand

support for 2 seaters sofa. Seat support also been in same metal section. In the metal section, the finished seating must be 0.78mm length x 0.53mm width. 2 Eight Hundred Two and Paisa

Seater also created. then Z-Section spring use and on top 4''.0' rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per Sixty Six Only

selected sample. At back support also 0.53mm width x 0.74 mm for 2 seater back, fitted with 2''.0' rubber cushion with 25mm U-Foam with 32 density appropriate

3'' angle support, also done finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe finish with legs and handle support

also as shown in drawing to create decoration and strengthening support. Including all materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge.

72 Centre Tipoi : Size: (0.90 x 0.60 x 0.46)Providing and fixing 12mm thick designer glass top supported with SS stud with 19mm thick plywood frame (shown in detail 1.00 No. 6195.03 Rupees Six Thousand One Hundred

drawing) with 1mm approved laminate finish with nylon buffers and including all materials and labour etc. complete as per detail drawing and instruction of Ninety Five and Paisa Three Only

engineer-in charge and consultant.

73 Corner Tipoi : Size: (0.675 x 0.675 x 0.46)Providing and fixing 12mm thick designer glass top supported with SS stud with 19mm thick plywood frame (shown in 6.00 No. 5444.68 Rupees Five Thousand Four

detail drawing) with 1mm approved laminate finish with nylon buffers and including all materials and labour etc. complete as per detail drawing and instruction of Hundred Fourty Four and Paisa

engineer-in charge and consultant. Sixty Eight Only

74 Full Ht. Storage (2.36 Height & 0.46 Depth) Providing and fixing full height storage with 25mm thick (plywood board, interior grade) top and shutter 19mm made 61.00 Smt 10502.78 Rupees Ten Thousand Five

from post forming in approved shade with vertical and horizontal surface 19mm plywood with inside 0.8mm and outside 1mm laminate finish. All teakwood Hundred Two and Paisa Seventy

bidding should be finished by melamine polish with support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as per detail Eight Only

drawing and instruction of engineer-in charge (Ref. Dwg. No. )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

75 Wall Paneling Wall paneling on wall for electrical conducting and net wiring etc. made by 19 mm and 12 mm plywood framing, 1mm 95.00 Smt 2116.80 Rupees Two Thousand One

approved laminate on surfaces openable facility with necessary hardware as per design and instruction as directed by site in-charge or architect.(Ref. Dwg. No. ) Hundred Sixteen and Paisa Eighty

76 Full Ht. Partition (Wooden) Providing and fixing full and low height partition and glass partition with installation upto ceiling or beam bottom as 151.00 Smt 3579.17 Rupees Three Thousand Five

per drawing and framing the skeleton (plywood frame structure) with 19mm + 19mm thick vertical and horizontal plywood (patti) both side cover with 6mm + Hundred Seventy Nine and Paisa

6mm for grooving as per design. Fixing properly without any air gap and finishing with selected 1mm laminate. Before installation, make hole/face plate for Seventeen Only

conduit pipes of electrical / networking cables with openable stud from partition Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge.

77 Providing and supplying bench (Three Seater) for visitors made of following backrest and seat made of PU with MS structure with powder coating finished as per 4.00 No. 20113.50 Rupees Twenty Thousand One

approved brand and model. (Brand and model as per HOF-Model-VIT-3004 PU / Godrej-Model-Luft 3 Seater 4 Arm / Wipro-Model-Metalica Classico PU / Hundred Thirteen and Paisa Fifty

Featherlite-Model-SJ-820A Tandem / Merrifare-Model-Varion Beam Seating (G01*B3a00J) or Equivalent) Only

78 Six seating folding type Lunch table (Premier India- Model PI-329) Providing and fixing Six seating folding type Lunch table made from main frame structure having 10.00 No. 15812.50 Rupees Fifteen Thousand Eight

size-40x40mm MS pipe 16 guage and tie frame support having size-32mm dia and top materail of Stainless steel sheet SS-202 1mm thick with top rest on Hundred Twelve and Paisa Fifty

25x25mm MS pipe 18 gauge. Providing plywood support under SS top to avoid noise. All MS structure finished with powder coating process. Including all Only

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant.

79 Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per 209.00 Smt 2474.80 Rupees Two Thousand Four

instruction by engineer – in – Charge with necessary hardware fitting, material and labour etc complete. Hundred Seventy Four and Paisa

80 S.S. Sinage Board (Name Plate) Providing and fixing S.S. signage board made from Stainless steel sheet and fixed on wall with screw and mirror cap as per 102.00 No. 1265.00 Rupees One Thousand Two

Instruction of designer and Engineer-In-Charge. Size (12" X 4.5") Hundred Sixty Five Only

81 Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on Ceiling / Slope Surfaces (Two Coats) to give an Required shape and even shade after thoroughly 2689.00 Smt 193.29 Rupees One Hundred Ninety Three

brushing the surface to remove all dirt, and remains of loose powdered materials and finishing smooth etc. complete. Rate are inclussive of Applying Two Coats of and Paisa Twenty Nine Only

Lappy (Putty) and One Coat of Primer on New Wall Surfaces to give an even shade including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly

Putty of Dulux Paint Only and Primer shall be of BP White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A

500 of Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux

Interior A 900 of Dulux Paint Only.) etc. Complete for ALL FLOORS.

82 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap even shade after throughly brushing the surface to remove all dirt 9483.00 Smt 180.25 Rupees One Hundred Eighty and

and remains of loose poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of primer on new wall surface to give Paisa Twenty Five Only

and even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Fine Putty Shall be

Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint Only & Primer shall be BP White Primer of

Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint only and Plastic Emulsion paint Shall be Rangoli

Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A 900 of Dulux Paint only.

83 Finishing walls with Weather Proof Exterior Emulsion Paint on Wall Surfaces (Two Coats) over and above Applying one coat of Primer to give an Required shape 6338.00 Smt 153.35 Rupees One Hundred Fifty Three

and even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials and finishing smooth etc. complete. (Primer and Paisa Thirty Five Only

Shall be of Weather Coat Exterior Primer of Berger Paint India Ltd or Asian Paint Trucare Exterior Primer of Asian Paint or Exterior Sealer E 900 of Dulux Paint Only

and Exterior Emulsion Paint shall be Weather Coat Smooth of Berger Paint India Ltd. or Apex Weather Proof Emulsion of Asian Paint or Dulux Weather Shield

Projects of Dulux Paint Only.)

84 Providing and applying waterbased acrylic waterproofing coating on existing china mosaic flooring as per below procedure. First clean the surface of existing china 1693.00 Smt 565.83 Rupees Five Hundred Sixty Five

mosaic flooring. Inject liquid tile adhesive in existing cracks of china mosaic & fill all cracks with epoxy grout. Apply first coat of water based acrylic waterproofing and Paisa Eighty Three Only

coating & then place in position the nylon mesh over the first coat & apply the second coat of acrylic waterproofing coating so that the nylon mesh get full

85 Provinding 10mm thick WATER PROOF cement plaster in single coat on fair side brick work or concrete wall for interior plasering upto floor to level and finishing 475.00 Smt 191.90 Rupees One Hundred Ninety One

even smooth in cemente mortar 1:3 (1 cement :3 sand) finished with floting coat of neat cemente slurry incl. provinding and mixing water proofing materials in and Paisa Ninety Only

proportion recommended by the manufacturersfor All Floors.

86 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment treatment in two coats of vertical and horizontal surface of depressed 475.00 Smt 110.70 Rupees One Hundred Ten and

portion of Bath/W.C. as directed by engineer in charge.This treatment shall be carried out over & above water proofing plaster. Paisa Seventy Only

87 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 1) including neat cement finishing, watering etc. Complete. 709.00 Smt 24.04 Rupees Twenty Four and Paisa

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

88 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. As per Engineer in charge. 88.00 Cmt 791.68 Rupees Seven Hundred Ninety One

and Paisa Sixty Eight Only

89 Providing & laying cement flooring 1:2:4(1 cement:2coarse sand :4 stone aggregate 20mm. Nominal size)laid in one layer finished with a floating coat of neat 292.00 Smt 365.48 Rupees Three Hundred Sixty Five

cement (B) 50 mm. thick and Paisa Fourty Eight Only

90 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 mm dia. 84.00 No. 416.47 Rupees Four Hundred Sixteen and

Paisa Fourty Seven Only

91 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 40 mm dia. 9.00 No. 656.86 Rupees Six Hundred Fifty Six and

Paisa Eighty Six Only

92 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 50 mm dia. 2.00 No. 2302.33 Rupees Two Thousand Three

Hundred Two and Paisa Thirty

93 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from M.S. flat,square bars, round bars,c-channel, box pipe as per detail 3470.00 Kg. 75.11 Rupees Seventy Five and Paisa

Drawings. Rate is including welding with grinding. Rate is also including two coats of Oil paint and one coat of yellow Zinc cromet primer coat of approved brand Eleven Only

only oil paint shall be used as per approved material list of GSPHCL ,stuctural steel must be of ISI mark only.

94 Providing & fixing in position ISI marked Rotational moulded Polyethylene double layer cylindrical vertical storage tank (IS : 12701) water tank size inlcuding 10000.00 Ltr. 3.91 Rupees Three and Paisa Ninety

making inlet and outlet. Over flow and washout arrangement with G.I. connection inlcuding using necessary M.H. for connection etc. complete with closed cover One Only

including applying two coats of oli painting outside the tank etc.complete.

95 Providing and applying micro concrete in existing RCC members. Micro concrete shall be of Perma recrete-306 or its equivalent from ROFF, FOSROCK, BASF or 390.00 Smt 3109.44 Rupees Three Thousand One

SIKKA as approved by engineer in charge (OF 60MPA at 28days). Rate aera inclusive of cleaning the surface, remove loose particles. Hundred Nine and Paisa Fourty

96 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five 250.00 Rmt 388.05 Rupees Three Hundred Eighty Eight

Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing and Paisa Five Only

the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

97 Provinding and fixing SW gully trap with out CI grating brick masonary chamber and water tight CI cover with frame of 300*300mm size inside with standard 28.00 No. 1176.94 Rupees One Thousand One

weight (I) Square mouth traps ©150*100mm size P or R type. Hundred Seventy Six and Paisa

Ninety Four Only

98 Construction brick masonary chamber for underground C.I.inspection chamber and bends with brick having crushing strength not less than 35 kg/cm2 in C:M 1:5 20.00 No. 3793.18 Rupees Three Thousand Seven

R.C.C. top slab with 1:2:4 mix with 8mm dia steel at 15 cm.c/c and providing and foundation concrete 1:5:10 inside plaster 15mm thick with cement with a Hundred Ninety Three and Paisa

floating coat of neat cement walls and bed concrete etc. complete .Rates are also inclusive of outside plaster 15mm thick in C:M 1:3 from top of chamber and all Eighteen Only

side upto 45 cms. deep below ground level. (A) Inside dimension 455mmx610mm and 450mm deep for SINGLE OR Multi purpose pipe line. and providing and

fixing precast rcc frame with cover(over MD10 ton (rubber mould finish) inner size 455x610 mm with necessary fittings

99 Extra over above item No.98 every additional depth of 0.10m or part there of beyond 450mm depth for brick masonry chambers.(I) for 455mm x 610mm size 20.00 No. 239.99 Rupees Two Hundred Thirty Nine

and Paisa Ninety Nine Only

100 Constructing Brick Masonary Chamber for underground C.I inspection chamber and bends with brick having crushing stenghth not less then 35 kg/ cm2 in C.M 10.00 No. 5476.93 Rupees Five Thousand Four

1:5 R.C.C top slab 1:2:4 mix (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size ) with 8mm dia steel at 15 cm. C.C and foundation concrete Hundred Seventy Six and Paisa

1:5:10 inside plaster 15mm thick with a flotting coat of neat cement walls and bed concrete etc. complete. Rate are also inclusive of outside plaster 15mm thick in Ninety Three Only

C.M 1:3 from top of chamber and all side upto 45cm deep for multi Or Single purpose pipe line. MD10 ton (rubber mould finish) inner size 600 x850 mm with

necessary fittings

101 Extra over above item No. 100 for additional depth of 0.1 m or part thereof beyond 450mm depth for brick masonary chamber for (I) 600 x 850mm 10.00 No. 322.37 Rupees Three Hundred Twenty Two

and Paisa Thirty Seven Only

102 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated 70.00 Smt 699.90 Rupees Six Hundred Ninety Nine

mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and and Paisa Ninety Only

level as per guidlines of IRC : SP 63-2018 etc. Complete.

TOTAL CIVILAMOUNT

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

(B-Electrical Work)

103A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS 750.00 Point 403.00 RS: Four Hundred Three only

wire for earth continuity in 25/32/40mm ISI mark PVC casing capping double lock type & necessary accessories erected flushed on wall/ceiling complete with

approved make 5/6 Amp. ISI mark modular type switch and accessories mounted in company made PVC box covered with appropriate front plate modules

erected flushed with necessary modular lamp holder / modular ceiling rose / HD Connector( make & Model approved by EIC & matching colour with switch

accessories) wth PVC box as directed for casing caping wiring. Length of point wiring must not increase than 10 mtr. For that necessary switch boards and their

locations must be finalised before execution by agency otherwise payment will not be done for extra long point. Light point. Cat.-III.

103B For secondary light point Cat.-III 110.00 Point 110.00 RS: One Hundred Ten only

103C For Bell Point Cat-III 42.00 Point 403.00 RS: Four Hundred Three only

103D For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type Electronic fan regulator both having ISI mark) Cat.-III 180.00 Point 590.00 RS: Five Hundred Ninty only

103E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 100.00 Point 427.00 RS: Four Hundred Twenty Seven

103F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 190.00 Point 255.00 RS: Two Hundred Fifty Five only

104A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC 400.00 Mtr 24.00 RS: Twenty Four only

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. For 20 mm. dia.

104B For 25 mm. dia 600.00 Mtr 33.00 RS: Thirty Three only

105A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height 400.00 Mtr 22.00 RS: Twenty Two only

as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size.

105B For 25 mm 300.00 Mtr 31.00 RS: Thirty One only

105C For 32 mm 200.00 Mtr 36.00 RS: Thirty Six only

105D For 40 mm 200.00 Mtr 42.00 RS: Forty Two only

106A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with ISI mark 20/25/32/40 mm PVC casing capping double lock type with 2100.00 Mtr 56.00 RS: Fifty Six only

necessary accessories erected flushed on wall/ceiling complete with FRLS PVC insulated wire for earth continuity. [a] 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code.(Conductor resistance should be as per

106B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 1900.00 Mtr 82.00 RS: Eighty Two only

(Conductor resistance should be as per IS:8130/1984)(For Computer point only)

106C 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour 900.00 Mtr 95.00 RS: Ninty Five only

code.(Conductor resistance should be as per IS:8130/1984)(For AC point only)

106D 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 50.00 Mtr 135.00 RS: One Hundred Thirty Five

(Conductor resistance should be as per IS:8130/1984)(If required ) only

106E 4 x 4.00 sq. mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code. 550.00 Mtr 169.00 RS: One Hundred Sixty Nine only

(Conductor resistance should be as per IS:8130/1984) (For LDB )

106F 4 x 6.00 sq.mm. FRLS copper multi stranded conductor mains with 4.0 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour 550.00 Mtr 253.00 RS: Two Hundred Fifty Three

code.(Conductor resistance should be as per IS:8130/1984)(For ACDB ) only

106G 4 X 10 sq. mm. FRLS copper multi stranded conductor mains with 4.0 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour 450.00 Mtr 411.00 RS: Four Hundred Eleven only

code.(Conductor resistance should be as per IS:8130/1984)(For CDB only )

107 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. 100.00 Mtr 31.00 RS: Thirty One only

108 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. 100.00 Mtr 37.00 RS: Thirty Seven only

109 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in wall with necessary plastering & finishing covered with 3mm 2000.00 Sq. inch 5.94 RS: Five and Paise Ninty Four

thick Laminated sheet with grooving as directed of following depth. 3" Depth only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

110 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper 60.00 Point 608.00 RS: Six Hundred Eight only

PVC insulated FRLS wire for earth continuity in ISI mark PVC casing capping double lock type with necessary accessory erected flushed on wall/ceiling complete

with 16 Amp Modular type Swich and accessories mounted in company made PVC box covered with appropriate front plate modules erected flushed with wall.

(a) 16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both having ISI mark. Cat.-III (Conductor resistance should

be as per IS:8130/1984)

111 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper 100.00 Point 767.00 RS: Seven Hundred Sixty Seven

PVC insulated FRLS wire for earth continuity in ISI mark PVC casing capping double lock type with necessary accessory erected flushed on wall/ceiling complete only

with 20Amp Modular type Swich and accessories mounted in company made PVC box covered with appropriate front plate modules erected flushed with wall.

(a) 20 Amp Indicator switch & 1 No. 16/20 A universal socket white colour suitable for 3 pin top duly both having ISI mark. Cat.-III (Conductor resistance

should be as per IS:8130/1984) (AC point)

112A Providing following type of Modular Type Accessories mounted with 20 G G.I. company fabricated metalic box/Company made PVC box , single mounting base 8.00 Each 629.00 RS: Six Hundred Twenty Nine

frame covered with textured / metallic front plate, modules erected with necessary connection. As desired by Engineer in charge. (A) For 1 Nos. of 16 Amp SP only

Switch & 3 Nos. of 6 Amp 3/5 pin plug. Cat III ( For TV Switch Board)

112B TV Co axial Socket Outlet.Cat III 8.00 Each 159.00 RS: One Hundred Fifty Nine only

112C Blank Plate Single. Cat.-III 500.00 Each 25.00 RS: Twenty Five only

112D For Modular Indicating Call Bell 30.00 Each 326.00 RS: Three Hundred Twenty Six

112E For Modular Buzzer 30.00 Each 148.00 RS: One Hundred Forty Eight

113 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology 20.00 Each 7025.00 RS: Seven Thousand Twenty Five

earthing.Earthing electric rod must be made from Corrosion free Hot dip galvanizing pipes having following specification. only

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark

reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave rectangular shape so its

work as a terminal.The hot deep galvanising must be done after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrodewith inside conductive material

minimum should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

(C) Back fill Compound :-Earthing compound should be capable to retain moisture for long time Back Filling Compound weight is 50 Kg. Necessary test report

must be submitted.

(D) Chamber and cover :-Earthing chamber should be size of 400mmX400mmX400mm depth and Cover should be heavy duty cast iron with required size of

300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for approved before supplying

Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral &Earthingupto 02 volt. Agency has to maintain earthing& its value for one year. If required. Earthing must be done in the

presence of A.E (GSPHCL)

114 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with 20.00 Each 276.00 RS: Two Hundred Seventy Six

photographs) only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

115 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat 50.00 Each 370.00 RS: Three Hundred Seventy

sink shall be made from Aluminum extrusion having enough strength (sample must be approved by EIC)with polycarbonate diffuser with following specification: only

(A) Company mark/name on the fitting.(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current :

0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD :Max. 15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K)

LED life span: Min. 50000 Hrs @ L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV(N) IP rating: IP 20(O) IK rating

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected on

wall or ceiling.(R) 3 core copper wire of appropriate size with earthing connector

(Note: The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement Guarantee for complete Fixture)(Model

approved by Engineer in Charge subject to above Specification.)[Approval will be given strictly subject to item specification]

116 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 w Cool/ Warm / Natural white Color LED Down lighter office Lighting Luminaire with separate 430.00 Each 751.00 RS: Seven Hundred Fifty One

driver with single piece pressure die cast aluminium alloy housing with corrosion resistant powder coated finish with PMMA /PS /Injection mouldede only

Polycarbonate diffuser with high brightness LED complete (only from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram CRI with 24w,CRI greater than

CCT 5600K( 5400 to 5800K), The led's should be mounted on back lit metal core PCB for better heat conduction and long life of LED. The Fixture should comply

all International Standarad third party (LM 79 for complete fixture, LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over load,

wrong wiring, THD less than15%,, P.F greater than0.95,efficacy greater than90lm/w & driver efficiency greater than85%, 24 w fixture wide voltage range from

160V to 270V, 50/60 HZ, @ 240V application, 4 KV surge protection. The fixture should be provided with external separate Potted driver, latest Valid BIS

approved Luminaire and driver . The Fixture must have min.2160 Lumens light pouput. Fixture should be efficacy greater than90 lumens/watt only for safety and

performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval, heat resistant test, thermal test, Ingress protection test, drop test, Photobiological report [Note: The

manufacturer / authorised Channel partner of the manufacturer has to submit 5 yr free replcement Guarantee for complete Fixture] (Model approved by Engineer

in Charge subject to above Specification.)[Approval will be given strictly subject to item specification]

117 SITC of Indoor Commercial Recess / Surface mounted (IP20) 18 W Cool/ Warm white Color LED Down lighter office Lighting Luminaire with separate potted 200.00 Each 584.00 RS: Five Hundred Eighty Four

driver with single piece pressure die cast aluminium alloy housing with corrosion resistant powder coated finish with PMMA /PS /Injection mouldede only

Polycarbonate diffuser with high brightness LED complete (only from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram CRI with 12w, the led's should be

mounted on back lit metal core PCB for better heat conduction and long life of LED. The Fixture should comply all International Standarad third party (LM 79 for

complete fixture, LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over load, wrong wiring, THD <10%,, P.F >0.95,efficacy

>90lm/w & driver efficiency >85%,, 12W fixture wide voltage range from 160V to 270V, 50/60 HZ, @ 240V application, 2 KV surge protection.The fixure must

have min. 1620 lumen light output.The fixture should be provided with external separate Potted driver, latest Valid BIS approved Luminaire and driver . The

Fixture efficacy >90 lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling. The

Luminiare should be tested as per IP 20 and following test reports should be submitted at the time of approval, heat resistant test, thermal test, Ingress protection

test, drop test, Photobiological report with 3 core X1.0 Sqmm flexible wire as per site requirment [Note:-The manufacturer / authorised Channel partner of the

manufacturer has to submit 5 yr free replcement Guarantee for complete Fixture]

118 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built surge 100.00 Each 111.00 RS: One Hundred Eleven only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf greater thanequal to 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

119 Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 watt Lighting Fitting with electronic driver having THD less than 15%, CRIgreater 50.00 Each 780.00 RS: Seven Hundred Eighty only

than80, P.F.0.95 And lumen output from luminaire 720 lm, input voltage range 160 270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency

greater thanequal to80lm/w, 20 deg C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

120 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Current (BLDC) permanent 180.00 Each 2603.00 RS: Two Thousand Six Hundred

ferrite magnet Motor, class of insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, Three only

copper winding, Power factor not less than 0.9, Service Value (CMM/W) minimum 7.5, Air delivery minimum 220 CMM, Minimum 345 RPM,230v (tolerance as

per IS : 374 2019), THD less than 10%, compitible with electronic regulator unit for Five Speed Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise equal to 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.Down road: up to 1.0 mtr as per site requirment.3 core 1.0 sq.mm wire as per site

requirment (A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj Energos 28 & Crompton make & model approved by EIC suject to above specification

121 Providing & erecting Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar 180.00 Each 98.00 RS: Ninty Eight only

122 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core 60.00 Rn. Mtr. 107.00 RS: One Hundred Seven only

flexible Core with earthing. The down rod thickness, hole, locking arrangement, construction, powder coating, colour shed should be same as original down rod

brought with ceiling fan. For that agency has to give original down rod sample to fabricator and one sample down rod should be approved with EIC. After approval

given by EIC agency can use the down rod as per approved sample. If without approval down rod will be erect on site, agency has to replace them with own

cost.(Execute if fall ceiling occurs)

123 Supplying & erecting approved make low noise Decorative exhaust fan having size 200 mm with 1350 RPM with round / square frame ABS body with Grill and 45.00 Each 1687.00 RS: One Thousand Six Hundred

inbuilt lowers. ( Havells Make Ventiliar LX model, Bajaj, Usha, Crompton & Equivalent Model Approved by EIC) Eighty Seven only

124 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt complete erected on existing polished wooden block or in M.S. box with 3mm thick white ISI 12.00 Each 170.00 RS: One Hundred Seventy only

mark laminated sheet. (Anchor-Chime model,Rider,Vision)

125 Providing ad erecting approved make 6Way Three phase Double Door Horizontal / Vertical type (as per site requirement and EIC instruction) outgoing per phase 30.00 Each 2885.00 RS: Two Thousand Eight Hundred

outgoing type (PPI) metal clad D.B. as per relevant Indian standards amended up to date.Supplying and fixing following way Three phase MCB distribution board Eighty Five only

with company wire links for internal connections having colour code and with suitable lugs and company fabricated with sheet box with powder coated inside

and outside after apply seven tank chemical process of 1.2mm thick CRCA sheet (Door, Back side & body of MCBDB) cover complete with suitable integral single

piece construction, tinned copper busbar and link with all necessary interconnection and with necessary size GI frame (if required for surface type) for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 440 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC 10mm2 insulated copper conductor with Pin type lug up to terminal blocks and

internal connection, tinned copper bus bar, 4 nos. tinned copper neutral link, 4 nos. tinned copper earth bar, din bar 4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and single phase outgoing.Total quantity of wire link: 13 Nos.

For Three phase 6 Way Double Door PPI MCBDB (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level

with spirit level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

126 Providing ad erecting approved make 12Way Three phase Double Door Horizontal / Vertical type (as per site requirement and EIC instruction) outgoing per phase 14.00 Each 3836.00 RS: Three Thousand Eight Hundred

outgoing type (PPI) metal clad D.B. as per relevant Indian standards amended up to date.Supplying and fixing following way Three phase MCB distribution board Thirty Six only

with company wire links for internal connections having colour code and with suitable lugs and company fabricated with sheet box with powder coated inside

and outside after apply seven tank chemical process of 1.2mm thick CRCA sheet (Door, Back side & body of MCBDB) cover complete with suitable integral single

piece construction, tinned copper busbar and link with all necessary interconnection and with necessary size GI frame (if required for surface type) for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 440 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC 10mm2 insulated copper conductor with Pin type lug up to terminal blocks and

internal connection, tinned copper bus bar, 4 nos. tinned copper neutral link, 4 nos. tinned copper earth bar, din bar 4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and single phase outgoing.Total quantity of wire link: 13 Nos.

For Three phase 12 Way Double Door PPI MCBDB (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level

with spirit level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

127A Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated 8.00 Each 9925.00 RS: Nine Thousand Nine Hundred

copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 100/125 AMP TPN MCCB + RCCB as Twenty Five only

incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used)

For 4 way outgoing

127B For 6 way outgoing 16.00 Each 12061.00 RS: Twelve Thousand Sixty One

128 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP 42 & above protection as per 5.00 Sq.Mtr 16230.00 RS: Sixteen Thousand Two Hundred

approval from engineer incharge and made from 2 mm. thick CRC M.S. sheet for outer body & doors, 1.6 mm. thick CRC M.S. sheet for internal partitions with Thirty only

necessary supporting angles, flats including skirting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of

engineer In Charge with erection of supplied switchgears, busbars with suitable size of interconnecting PVC copper wire / Copper Aluminium strips, rubber

gromets, rib, control wires, backelite control fuses, measuring instruments, earth bus & earth bolts, foundation flange bolts base plates, sufficient nos. of hinged

doors, handle with locking arrangement, rubber gasket complete with Required Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti rusting The

panel shall be supplied with Seven Tank chemical process which shall be carried out before applying painting, painted with powder coating. (The rates excludes

the cost of switchgears, busbars, interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension shall be measured excluding base beams)

The standard companies switch gear shall be used and only manufacturers at CPRI approved factory as per IEC 61439 and shall be certified by that company

whose switch gears are used after fabrication for beneficial use. With 350 mm depth Panel manufacturer have to give 5 years maintenance and service support if

in case of breakdown or fault. Panel manufacturer have to submit electrical meter calibration report. Agency should design the panel in such a way that there

should not be any excess in panel area (sq.mtr) & length of bus bar (mtr), if any excess occurs draw attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under supervision of electrical engineer and guidelines given by manufacturer to

avoid damage to the item. Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's engineer before giving order. If found any problem in size discuss with GSPHCL engineer for

rectification before giving order. [Including Necessary numbering / marking on PANEL done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as per requirement] (All Panel as per IEC 61439 as per NBC Guideline) [Manufacturer

must be of Gujarat state so three stage inspection can be done]

129A Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not 2.00 Rn.Mtr 1942.00 RS: One Thousand Nine Hundred

more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wraped with colour insulating tape for phase sequence of following current carrying Forty Two only

capacity, erected with necessary bus bar supports / insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections.For

electrolyte copper busbars Suitable for 100 Amp. capacity.

129B For Suitable for 200 Amp. Capacity 3.00 Rn.Mtr 3171.00 RS: Three Thousand One Hundred

Seventy One only

129C For Suitable for 300 Amp. Capacity 2.00 Rn.Mtr 4861.00 RS: Four Thousand Eight Hundred

129D For Suitable for 400 Amp. capacity 4.00 Rn.Mtr 7247.00 RS: Seven Thousand Two Hundred

Forty Seven only

129E For Suitable for 630 Amp. capacity 2.00 Rn.Mtr 10455.00 RS: Ten Thousand Four Hundred

Fifty Five only

130 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V . having normal current rating up 2.00 Each 24979.00 RS: Twenty Four Thousand Nine

to 400A. with variable/ fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections spreader tinned copper & complete Hundred Seventy Nine only

erected in existing 16 G.M.S.housing ICSequal to100% of ICU only

131 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V . having normal current rating 1.00 Each 16061.00 RS: Sixteen Thousand Sixty One

200A. with variable/ fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,spreader tinned copper & complete only

erected in existing 16 G.M.S. housing. ICSequal to100% of ICu only.

132 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V . having normal current rating 4.00 Each 20739.00 RS: Twenty Thousand Seven

250A. with variable/ fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,spreader tinned copper & complete Hundred Thirty Nine only

erected in existing 16 G.M.S. housing. ICSequal to100% of ICu only.

133 Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for 1.00 Each 13221.00 RS: Thirteen Thousand Two Hundred

For 100/125A Twenty One only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

134 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. 10.00 Each 7976.00 RS: Seven Thousand Nine Hundred

with variable/ fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,spreader tinned copper & complete erected in Seventy Six only

existing 16 G.M.S. housing. ICSequal to100% of ICu only.

135 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating 25 A 45.00 Each 6112.00 RS: Six Thousand One Hundred

to 100A. with variable/ fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,spreader tinned copper & complete Twelve only

erected in existing 16 G.M.S. housing. ICSequal to100% of ICU only

136 Providing and erecting following additional parts for panel mounting MCCBs 60.00 Each 865.00 RS: Eight Hundred Sixty Five

For Extended operating rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel mounting only

137 For Extended operating rotary handle with pad lock with three position trip,off,on suitable for 400A to 630 A panel mounting cat-III 2.00 Each 1298.00 RS: One Thousand Two Hundred

Ninty Eight only

138 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 x 1/2 digits LED display, 0.5 class of accuracy 0 to 750 AC Volts range 4.00 Each 1263.00 RS: One Thousand Two Hundred

erected on existing panel board with all connection, wiring etc. with manufacturers calibration certificate. Sixty Three only

139 Supplying & erecting aproved make Panel mounting type Digital Ammeter having Three Digits LED Display,0.5 class of accuracy, External CT operated Calibrated 4.00 Each 1543.00 RS: One Thousand Five Hundred

for 0 to 1000 Amps suitable to operate on 500 Volt AC erected on existing panel board with all connection wiring etc.with manufacturers calibration certificate. Forty Three only

140 Supplying, erecting, testing and commissioning of Ammeter / Voltmeter selector switch for 3 phase AC supply 500 V on existing panel board with necessary 8.00 Each 314.00 RS: Three Hundred Fourteen

connections. only

141 Providing, erecting, testing and commissioning of L.T. Current Transformer with bus bar primary 50/5 to 1000/5 ratio 15 VA burden having 0.5 Class Accuracy 12.00 Each 272.00 RS: Two Hundred Seventy Two

Duly secured with insulating materials connected to the meter. only

142 Supplying and erecting approved make set of indicator lamps LED lamp, lense cover, bakelite holder complete erected with necessary connections. 15.00 Each 43.00 RS: Forty Three only

143A Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 10 KA Breaking capacity and confirms to IS : 8828 in existing metal box 35.00 Each 662.00 RS: Six Hundred Sixty Two only

having following capacity. 40Amp FP.

143B For 32Amp FP 5.00 Each 590.00 RS: Five Hundred Ninty only

143C For 63Amp FP 20.00 Each 730.00 RS: Seven Hundred Thirty only

144A Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 115.00 Each 641.00 RS: Six Hundred Forty One only

following capacity For 40 Amp.

144B For 63 Amp. 17.00 Each 709.00 RS: Seven Hundred Nine only

145 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 5.00 Each 327.00 RS: Three Hundred Twenty Seven

having following capacity. For 40Amp DP. only

146 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected 550.00 Each 111.00 RS: One Hundred Eleven only

in existing box. confirming to IS 8828/1996 with ISI Mark

147 Approved make Earth fault Relay suitable to mount with inter connection to moulded case circuit breaker having CT ratio & MCCB rating as following along with 1.00 Each 4641.00 RS: Four Thousand Six Hundred

shunt trip 220V AC. with CT and all internal connections & complete erected in existing M.S.housing.. For 15 A 100 A , CT Ratio 1/100 Forty One only

148 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor protection Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide line 1.00 Each 6319.00 RS: Six Thousand Three Hundred

for the protection of SPD which is erected such a way that it can be operated easily) SPD must be capable to protect all electrical and electronics equipments if SPD Ninteen only

blast or fuse then the panel builder must have replace it soon during defect liability period.The Detail Specification of SPD are As per Attached sheet with

Annexture A(E). (Hakel,iskra,OBBO make) (With five year Gaurantee/warranty)

149 providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable 135.00 Each 2213.00 RS: Two Thousand Two Hundred

for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. Thirteen only

for following Max. rating erected as directed For 40Amps. DP

150 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable 2.00 Each 4272.00 RS: Four Thousand Two Hundred

for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic Seventy Two only

component for following Max. rating erected as directed.For 100 Amps. FP

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

151 Supply and Fixing of company fabricated Sheets steel powder coated enclosure Size 4 X6 for incorporating Two nos. MCB.(MCBDB must be erected in line 5.00 Each 272.00 RS: Two Hundred Seventy Two

level and level with spirit level and finish the external edge with box cutting plaster)( Same color MCB(SP/DP) should be used as same as MCBDB)( Incl. necessary only

numbiring /marking on box done with RED colour radium sticker as per site requirement and instruction given by EIC on site. Font/ Number size given by EIC on

site as per requirement)(The enclosure should be used of same company of MCB/ ELCB to be used)

152 Supply and Fixing of company fabricated Sheets steel powder coated enclosure minimum Size 8 X6 for incorporating Four nos. MCB.(The enclosure should 5.00 Each 442.00 RS: Four Hundred Forty Two

be used of same company of MCB/ ELCB to be used) (MCBDB must be erected in line level and level with spirit level and finish the external edge with box cutting only

plaster)( Same color MCB(SP/DP) should be used as same as MCBDB)( Incl. necessary numbiring /marking on box done with RED colour radium sticker as per site

requirement and instruction given by EIC on site. Font/ Number size given by EIC on site as per requirement)

153A Providing following type of Modular Type Accessories mounted with 20 G G.I. company fabricated metalic box/Company made PVC box , single mounting base 290.00 Each 159.00 RS: One Hundred Fifty Nine only

frame covered with textured / metallic front plate, modules erected with necessary connection. As desired by Engineer in charge. For Two Pin/RJ-11 Telephone

Socket Cat.-III

153B For Computer RJ-45 socket Cat.-III 300.00 Each 159.00 RS: One Hundred Fifty Nine only

154 SITC of specified make X color for Cat. 6 Data and Y color for Cat. 6 voice cable to be done in prelaid PVC pipe / raceway, but without the cost of raceway or pipe 5700.00 Mtr 47.00 RS: Forty Seven only

(the wire is to be drawn from MFD/ JB to outlet point) (a) CAT 6 (For Computer Cabling and For Voice Cabeling) (Molex, commscope system, Legrand make

155 Providing & erecting approved make Fingerprint and card based Premium Door Controller with LCD and Keypad having following features. 12.00 Each 22916.00 RS: Twenty Two Thousand Nine

(A) Optical Fingerprint and Card based Reader (Card personality Module not included] Hundred Sixteen only

(B) Dot-Matrix LCD and Touch sense Keypad

(C) Built-In interfaces like door lock, door sense, exit Reader, Exit switch, Ethernet RS485, Aux Input & Aux Output Port

(D) 5000 Events, Access Control, Time Attendance, Tamper Detection

(E) 4 LEDS and Buzzer(Make & Model Approved by E.I.C.)

156 Providing & erecting approved make Card Reader having following features. 12.00 Each 3196.00 RS: Three Thousand One Hundred

[A] Wiegand / RS232 Interface Ninty Six only

(B) Power supply from COSEC Door controller or through Separate Adaptor

(C) Compatible with any COSEC Door controllers

(D) 4 LEDs (Status, Alarm, Allowed and Denied) and Buzzer

(E) Tamper Detection(Make & Model Approved by E.I.C.)

157 Providing & erecting approved make Card Personality Module (CPM) having following features 12.00 Each 1425.00 RS: One Thousand Four Hundred

(A) EM proximity Card Reader Module [Low frequency] Twenty Five only

(B) Compatible with any COSEC Door Controllers and COSEC Reader CA

(C) Supports EM Proximity Card(Make & Model Approved by E.I.C.)

158 Providing & erecting approved make Access Control Module (ACM) having following features 12.00 Each 3653.00 RS: Three Thousand Six Hundred

(A) Comprehensive Access Control Management Fifty Three only

(B) For 500 Users [AS PER COSEC GE PLATFORM users]

(C) Time, User and Zone Based Access Control

(D) Access Zones, Access Modes and Access Levels

(E) Advanced Access Control Feature like 2-person rule, First in user rule, Antipas Back, Guard Tour, Duress Detection and More

(F) Various Reports Generation(Make & Model Approved by E.I.C.)

159 SITC of 24 x 10/100/1000BASE T ports 17.00 Each 15247.00 RS: Fifteen Thousand Two Hundred

4 x Gigabit RJ45/SFP Combo ports Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface.

[cisco enterprise,HP enterprise,netgear,Allied telesys and model approved by EIC as per specification]

160 SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA 568C Category 6, Installation and Termination of all 24 nos. Catergory 6 17.00 Each 4357.00 RS: Four Thousand Three Hundred

UTP , unloaded with individually replaceable 24 nos. Category 6 I/O Jacks complying with TIA 568.C.2, as per given jack specification Shall be suitable for loading Fifty Seven only

unshielded & shielded jacks for different category systems (CAT 6 & CAT 6A) [molex,commscope system,legrand ]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

161 Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack should be fully enclosed steel housing fabricated with 14 SWG 11.00 Each 11441.00 RS: Eleven Thousand Four Hundred

sheet and powder coated with glass doors and having wire management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip and Forty One only

all the wiring in the rack. Size 600 X600 mm (Rittal, Valrack, APC, Legrand Make )

162 Supply and installation of 12U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack should be fully enclosed steel housing fabricated with 14 SWG 2.00 Each 15255.00 RS: Fifteen Thousand Two Hundred

sheet and powder coated with glass doors and having wire management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip and Fifty Five only

all the wiring in the rack. Size 600 X600 mm (Rittal, Valrack, APC, Legrand Make )

163 SITC of company fabricated Patch cords shall conform to Cat 6 & conductor shall be stranded for better flexibility Shall support network line speeds up to 1 Gbps 300.00 Each 155.00 RS: One Hundred Fifty Five only

Shall have RJ 45 jacks. For 1 Mtr.[molex,commscope system,legrand ]

164 SITC of company fabricated Patch cords shall conform to Cat 6 & conductor shall be stranded for better flexibility Shall support network line speeds up to 1 Gbps 300.00 Each 199.00 RS:

One Hundred Ninty Nine

Shall have RJ 45 jacks. For 2 Mtr. [molex,commscope system,legrand] only

165A Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips(a) Suitable for 20 pair(Kron type) 8.00 Each 1355.00 RS: One Thousand Three Hundred

Fifty Five only

165B (b) Suitable for 50 pair 8.00 Each 1730.00 RS: One Thousand Seven Hundred

166 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & 200.00 Mtr 126.00 RS: One Hundred Twenty Six

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of only

pairs. With necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured for Twenty Pairs

167 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & 100.00 Mtr 463.00 RS: Four Hundred Sixty Three

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of only

pairs. With necessary connections.[A] Conductor Size 0.5 mm Armoured [Jelly Filled] Fifty Pairs If required

168 Supply, Installation, testing and commissioning of 6 core OS2 - loose tube outdoor/corrugated steel tape with Unitube construction Crush Resistance 2000N with 300.00 Mtr 50.00 RS: Fifty only

8.5 mm Diameter and confirming to IEC/EN 60793-2-50 class B1.3 ITU G.652.D EN 50 173-1:2007 ISO/IEC 11801:2002 ISO/IEC 24702:2006- through existing

GI/HDPE/ Hume pipe or on cable trays inside the cable duct including all necessary fixing accessories e.g. cable ties, hardware etc.

169 Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on Metal board erected as directed. 1 290.00 Each 1122.00 RS: One Thousand One Hundred

no. 6/16 Amp. universal Socket, 1 nos. 16 Amp. indicator switch, 3 nos. 6 Amp. Switch & 3 nos. 6 Amp. 5 pin Plug. Twenty Two only

For Computer power Supply board. Cat.III

170A Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All 550.00 Mtr 1309.00 RS: One Thousand Three Hundred

necessary accessories and measuring of following sizes. Nine only

For 100 mm x 50 mm trunking with TWIN compartment With clip in divider .[Honeywell, LEGRAND, OBBO make Only]

170B For 100 mm x 50 mm trunking.[Honeywell, LEGRAND, OBBO make Only] 300.00 Mtr 424.00 RS: Four Hundred Twenty Four

170C For 50 mm x 50 mm trunking.[Honeywell, LEGRAND, OBBO make Only] 200.00 Mtr 187.00 RS: One Hundred Eighty Seven

171 Supply, Installation testing and commissioning of 16 Gauge M.S. Powder coated floor raceway Access outlet / service junction box with 16 Gauge M.S. Powder 20.00 Each 750.00 RS: Seven Hundred Fifty only

coated Cover plate with duct entry 25 mm / 38 mm size having epoxy powder coated trap lead with corrosion & rust free with adjustable levelling screw of

following size. [a] 300 mm x 300 mm x 50 mm depth

172 Supply & Installation of 2.0 mm thick SS 304 for Existing Floor Junction box Cover Plate as per Site requirement & required Size with required size SS bolt, Srew 3.00 Sq. Mtr 8797.00 RS: Eight Thousand Seven Hundred

& champhear edge Ninty Seven only

173 SITC of Interface and PSU for Microphonediscussion system/Conference control Unit for Conference system. Unit should support and provise power to minimum 1.00 Each 95000.00 RS: Ninty Five Thousand only

20 Confernece unit. Should have THD < 0.5%. system signal output: unbalanced jack connector 6.3mm. signal to noise ratio > 60 dB. nominal output level 100 mV.

[Make: Biamp MDS.INT / Telvic / Brhaler]

174 SITC of Chairman Discussion Unit with Gooseneck mic. Discussion Unit with GSM immune Flexible height adjustable gooseneck microphone with bi-colour led ring 1.00 Each 46500.00 RS: Forty Six Thousand Five Hundred

indication (red / green). Chairman uni should have priority, When chairman presses the mute button, only the chairman unit will be active and all delegates only

should be muted and deactivated. Windscreen included.built-in Digital Signal Processing Unit with Microphone On / Off Button User Button with Feedback

Shielded microphone, immune to mobile phone interference. system interconnection : Loop-through RJ45 - CAT5 cables. Frequency Response: 80Hz-16kHz Polar

Patternunidirectional condensor. Max SPL @ 1kHz: 100dB. [Make: Biamp MDS.CHAIR / Televic / Brahaler]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

175 SITC of Delegate Discussion Unit with Gooseneck mic. Discussion Unit with GSM immune Flexible height adjustable gooseneck microphone with bi-colour led ring 18.00 Each 45600.00 RS: Forty Five Thousand Six Hundred

indication (red / green). Windscreen included.built-in Digital Signal Processing Unit with Microphone On / Off Button User Button with Feedback Shielded only

microphone, immune to mobile phone interference. system interconnection : Loop-through RJ45 - CAT5 cables. Frequency Response: 80Hz-16kHz Polar

Patternunidirectional condensor. Max SPL @ 1kHz: 100dB. [Make: Biamp MDS.DEL / Televic / Brahler]

176 SITC of 2 mtr Catx patch Cable 18.00 Nos 200.00 RS: Two Hundred only

177 SITC of 10 mtr Catx patch Cable 2.00 Nos 200.00 RS: Two Hundred only

178 SITC of 5" high power, high sensitivity 2-way loudspeaker. The speaker cabinet must have frequency Response :75 Hz - 20 kHz, sensitivity: 88dB or more, 6.00 Nos 18500.00 RS: Eighteen Thousand Five Hundred

delivering Max SPL of 107 dB or more with power Cont handling 50W or more. The speaker should have a the following wattage taps: 100V - 30 W, 15 W, 6 W, 3 Ω only

bypass.The speaker cabinet should have a horizontal x vertical coverage angle of 180 x 180 degree. [ Make: Biamp OVO5T / Bose / D&B]

179 SITC of 4 Channel 300W Class D Amplifier. Amplifier should supoort Flexible power sharing per channel. Amplifer Should support both 70/100V & 8/4 ohms 1.00 Nos 175000.00 RS: One lac Seventy Five Thousand

operation. Amplifier should have THD<0.008% or better, SNR>103dBA or better,Input impedance: +4 dBu or better. Amplifer should have inbuilt speaker EQ, only

highpass/Low pass filter. Amplifier should be CE marked, UL Listed and RoHS complaint. [Make: Biamp Voltera A300.4 / Bose / D&B]

180 SITC of DSP: 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo unbalanced input; 1 stereo and 2 mono outputs; 2-channel USB audio interface for 1.00 Unit 195000.00 RS: One lac Ninty Five Thousand

soft codec (Skype, WebEx) integration or playback from computer; Full digital processing on inputs and outputs; 8 x 3 audio routing matrix; 6-channel Smart Mix only

(gate or gain sharing); Onboard acoustic echo canceler (AEC) processing; Front panel direct operation and Web Remote functionality; IP control for third-party CCS

administration; Up to 6 mixers can be linked using Cat5e cable. [Make: Audio technica ATDM0604A / Biamp / Bose]

181 SITC of UHF Wireless Cardioid dynamic handheld microphone system with Frequency Response of 100 Hz to 15 kHz (+1 dB, -3 dB), RF Sensitivity 20 dBuV at 60 1.00 Nos 57627.00 RS: Fifty Seven Thousand Six

dBA S/N ratio (50Ω termination), Total Harmonic Distortion <1.0% (at 1 kHz, ±20 kHz deviation) , Dynamic Range > 110dB , on/off switch operating range 100 mtrs Hundred Twenty Seven only

, RF Power Output High: 30 mW, Low: 10 mW (switchable), Multiple band with 20 channels on each band ; maximum Output level XLR / Balanced: +9 dBV &

mm (¼"") / Unbalanced: +4 dBV. Power Supply 2 AA batteries.Operating range: 100 m.OEM MAF Required.After the installation is completed, the company should

visit the site, conduct an inspection, and issue a certification accordingly. [Make: Audi technica ATW-2120C/ Sennheiser/ DPA & Model Apperoved By EIC subject

to Above Specification ]

182 SITC of UHF Wireless Cardioid Cardioid condenser lavalier microphone with 55" cable terminated with locking 4-pin HRS-type connector, Frequency Response of 1.00 Nos 57627.00 RS: Fifty Seven Thousand Six

100 Hz to 15 kHz (+1 dB, -3 dB), RF Sensitivity 20 dBuV at 60 dBA S/N ratio (50Ω termination) , Total Harmonic Distortion <1.0% (at 1 kHz, ±20 kHz deviation) , Hundred Twenty Seven only

Dynamic Range > 110dB , on/off switch operating range 100 mtrs , RF Power Output High: 30 mW, Low: 10 mW (switchable) at 50 Ω , Multiple band with

channels on each band ; maximum Output level XLR / Balanced: +9 dBV & 6.3 mm (¼"") / Unbalanced:

+4 dBV. Power Supply 2 AA batteries.Operating range: 100 m. OEM MAF Required.After the installation is completed, the company should visit the site, conduct

an inspection, and issue a certification accordingly. [Make: Audio technica ATW-2110C + AT829CW/ Sennheiser/ DPA & Model Apperoved By EIC subject to Above

Specification ]

183 SITC of POP UP Box with 1xHDMI, 1xUSB, 2 x Power Supply, 1 x LAN 4.00 Nos 7500.00 RS: Seven Thousand Five Hundred

184 SITC of 17U-600*600. Front Glass door,side openble and rear metal door .Fan-2,Pdu 6 socket 5Amp -1 ,Tray-1,Cable manager-1 ,Mounting hardware-2pkt. [Elixir / 2.00 Unit 19500.00 RS: Ninteen Thousand Five Hundred

Valrack / Rittal] only

185 SITC of4K 4x2 Seamless HDMI Matrix Switcher with Multiview.HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant .18Gbps uncompressed bandwidth, input and output 1.00 Nos 225000.00 RS: Two lac Twenty Five Thousand

resolution up to 4K2K@60 4:4:4. HDMI audio formats support LPCM, DD+, DTS, Dolby TrueHD, DTS HD-master pass-through.Seamless switching between inputs only

.Combined multiple images independent layouts to display on two displays.Up to 8 display modes: Single, PIP, PBP(1), PBP(2), Triple(1), Triple(2), Quad(1),

Quad(2). Audio de-embedding via analog and optical fiber audio ports. Control via front panel buttons, IR remote, OSD menu navigation, controller software and

RS-232. Each output supports scaling function. Support independent audio selection. Advanced EDID management [Make: DVDO-Matrix-42SS-MV / Lightware /

186 SITC of 10X Optical zoom PTZ Camera. High quality 1/2.9 inch CMOS sensor. Full HD 1920x1080 resolution with frame rate up to 30fps.Low noise CMOS produces 1.00 Nos 165000.00 RS: One lac Sixty Five Thousand

high SNR image. Control interface: RS485, RS232. Multiple control protocols: VISCA, PELCO-D, PELCO-P with automatic protocol identification. Up to 255 presets. only

[Make: DVDO C8 / Aver / Lumens]

187 SITC of Business Laser Projector: 3LCD HD ready/WXGA Standard-Throw Laser Projector with Built-in Wireless: 4,500 lumens of color and white brightness, 20,000- 1.00 Nos 125600.00 RS: One lac Twenty Five Thousand Six

hour laser light source with no lamps*2, 2,500,000:1 Contrast, Native WXGA (16:10) resolution, 16 Watts speaker, c USB 2.0-A, USB 2.0, RS-232C, Ethernet Hundred only

interface (100 Base-TX / 10 Base-T), Wireless LAN a/n (5GHz), Wi-Fi Direct, VGA in (2x), VGA out, Composite in, Miracast, Jack plug out, Jack plug in (2x), Cinch

audio out, Microphone input, HDMI (HDCP 2.2) (2x), 1.6x optical zoom, 4.2 Kgs , Warranty 3 Years or 20000 hours. [Make: Epson EB-L210W / Sony / Panasonic]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

188 SITC of 120" 16:9 Motorised Tab Tensioned Projector Screen. [Make: Logic / Panara / AV Craft] 1.00 Nos 38600.00 RS:

Thirty Eight Thousand Six

189 SITC of 10mtr 4k60 Active HDMI Cable. [Make: Biamp / Lightware / Extron] 4.00 Nos 18500.00 RS: Eighteen Thousand Five Hundred

190 SITC of 15mtr 4K60 Active HDMI cable. [Make: Biamp / Lightware / Extron] 4.00 Nos 21500.00 RS: Twenty One Thousand Five

191 SITC of 5mtr USB3.0 A-B cable. [Make: Biamp / Lightware / Extron] 2.00 Nos 4400.00 RS: Four Thousand Four Hundred

192 SITC of 2core 18AWG Speaker Cable. [Make: Biamp / Lightware / Extron] 150.00 Mtr 135.00 RS: One Hundred Thirty Five

193 SITC of Wireless Handheld Microphone Transmitter - Operating Frequency: Digital 2.4GHz |Modulation mode:GFSK | RF Output Power: 10mW |Microphone 2.00 Nos 55000.00 RS: Fifty Five Thousand only

Element : Dynamic | Polar Pattern: Hyper-Cardioid/ Cardioid |Encryption Method : AES128 |Latency: < 3.8mSec or less

|Frequency Response: 20 Hz to 20kHz or better |RF Sensitivity: -90 dBm typical | Batteries: Two 1.5V AA. [Make: Audio Technica ATW1402 / Televic / Audix]

194 SITC of Wireless Gooseneck Microphone with deskstand transmitter |Operating Range : 2.4 GHz |Gooseneck Length 2.00 Nos 64000.00 RS: Sixty Four Thousand only

: 430 mm / 580 mm |Element: Fixed-charge back plate, permanently polarized condenser |Polar Pattern : Hypercardioid |LED Ring indicator |Modulation Mode:

GFSK|RF Output Power: 10mW EIRP |RF Sensitivity: -90 dBm, typical |Antenna : True diversity |AES128 or better Encryption method |Selectable mute operation

(toggle, touch-to-talk, or touch-to-mute) |Two LED options: standard mode and conference mode |Double-layer pop filter inside microphone |3-pin XLR-F

Connector | It shall have USB Type-C connector for charging Battery Life : 8 - 12 hrs. [Make: Audio Technica ATW1407 + Gooseneck Mic / Televic / Audix]

195 SITC of of 4ch Receiver for Wireless Microphone Receiver Operating Frequencies: 2.4GHz ISM band |Maximum simultaneous TX Channel count: 10ch on standard 1.00 Nos 95000.00 RS: Ninty Five Thousand only

mode, 20ch on HD mode | Audio channel per Receiver: 4ch (4ch with one receiver unit) |Dynamic Range: >120dB (A- weighted), typical | Total Harmonic

Distortion: <0.05% typical |Operating Range: 60m (200') |THD : < 0.05% typical |Frequency Response: 20 Hz to 20kHz |Latency: Less than 2.8 mS(Standard mode),

6.7 mS(HD mode) |Audio Bitrate: 192kbps |Audio Sampling: 24bit / 48kHz |Encryption: AES128 |Receiver with external antenna receiver port : RJ45. [Make:

Audio Technica ATW-1440 / Telvic / Audix]

196 SITC of 5" high power, high sensitivity 2-way loudspeaker. The speaker cabinet must have frequency Response :75 Hz - 20 kHz, sensitivity: 88dB or more, 2.00 Nos 18500.00 RS: Eighteen Thousand Five Hundred

delivering Max SPL of 107 dB or more with power Cont handling 50W or more. The speaker should have a the following wattage taps: 100V - 30 W, 15 W, 6 W, 3 Ω only

bypass.The speaker cabinet should have a horizontal x vertical coverage angle of 180 x 180 degree. [Make: Biamp OVO5T / Bose / D&B]

197 SITC of 19" mixing amplifier 70 - 100 volt / 120 watts, 2 mic/line input, 4 stereo line inputs, left to right 4 level priority system, Emergency in, paging mic with 1.00 Nos 98000.00 RS: Ninty Eight Thousand only

chime, 24V override output. [Make: Biamp MA120 / Bose / D&B]

198 SITC of 2core 24AWG Microphone Cable. [Make: Ramcro / Belden / Extron] 50.00 Mtr 140.00 RS: One Hundred Forty only

199A Providing and erecting Inverter based approved make split air-conditioning unit consisting of copper condensing unit with variable speed fan motor, inverter type 37.00 Each 35217.00 RS: Thirty Five Thousand Two

hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means Hundred Seventeen only

of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control

& MS Stand) with necessary core cutting. (1)For 3 Star Rating of current year(a) For 1.0 ton capacity (Make - OGENERAL, MITSUBISHI, BLUESTAR, DAIKIN, Toshiba

only) [ Model Approved by EIC ]

199B For 3 Star Rating of current year (a) For 1.5 ton capacity(Make - OGENERAL, MITSUBISHI, BLUESTAR, DAIKIN, Toshiba only) [ Model Approved by EIC ] 60.00 Each 41312.00 RS: Forty One Thousand Three

Hundred Twelve only

199C For 3 Star Rating of current year (a) For 1.7 to 2 ton capacity(Make - OGENERAL, MITSUBISHI, BLUESTAR, DAIKIN, Toshiba only) [ Model Approved by EIC ] 3.00 Each 51155.00 RS: Fifty One Thousand One Hundred

Fifty Five only

200 Air condationer copper tubing with minimum 19mm thick class O nitrile rubber insulation for entire piping system. Exposed refrigerant piping should be 650.00 Mtr 956.00 RS: Nine Hundred Fifty Six only

additionally insulated with factory laminatede 200GSM glass cloth for UV and mechnical protection and manufacturer recommended adhesive ( Solvent-free)

sealant appiled at all joints Uv- Protection layer. additional layer of UV paint over GC for all exposed to atmosphere piping for weather protection of pipes &

insulation and prevention of rain water ingress. For Single phase/ Three Phase Split A.C. Machine/ Cassate A.C Machine insulated pair of soft, copper tubing

including power and control cable, 20/25/32 mm Dia. Rigid (ISI marked) UPVC drain pipe. Duly Insulated with 6 mm elastomeric nitrite rubber up for Split AC

machine up to 4 TR capacity

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

201A Executing comprehensive (All in All) service & maintenance ( Four Service per year + Spare parts{ 2 Dry Service & 2 water or Chemical service) Contract for defect 37.00 job 2394.00 RS: Two Thousand Three Hundred

liability period as per tender items and conditions with AC agency for defect liability period and copy of this contract will be submitted before final bill. Agency has Ninty Four only

to quote rate accordingly. Agency has to also provide the fitness certificate from system agency and submit to G.S.P.H.C.L. Agency has to compulsory submit FDR

of approved bank as per clause 2.0 of section 3, Rs.349734.00+ GST or quoted amount which ever is higher to GSPHCL. for minimum maturity period of Five years

in favour of GSPHCL., Which will be released after successful completion of A.M.C. & at the completion of defect liability period.In any case without submitting

FDR final bill submission will not be done. AC agency has to provide four [04] servicse per year during defect liability period and one copy of necessary service

report duly singed by concern police officer and No Defect Certificate from police department at the time of releasing Security Deposite will be submitted to EE

(Ele.), GSPHCL. Without above Service reports security Deposit of whole project will not be released. (Agency will have to submit stability and performance

certificate regarding AC system from authorized dealer/OEM of AC at the time of final SD release). For delay in rectifing the fault penalty will be deducted from

agency S.D. For 1.0 Ton Split AC machine.

201B For 1.5 Ton Split AC machine. 60.00 job 4530.00 RS: Four Thousand Five Hundred

201C For 1.7 to 2.0Ton Split AC machine. 3.00 job 5598.00 RS: Five Thousand Five Hundred

Ninty Eight only

202A Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier & Inverter & 1.00 Each 575425.00 RS: Five lac Seventy Five Thousand

sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load Four Hundred Twenty Five only

power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated

paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (This item including comprehensive service &

maintanance including Spare Parts & consumable item, Battery replacing etc item during defect liability period . Maintanance & service must be carried out by

OEM dealer/ distributer who has executed the work. service & Maintance must be as per OEM guid line.) For 30 KVA 3 - phase with 1Hr Backup (Make- Numeric,

APC, Libert, Fuji,ProtekG )

202B For 60 KVA 3 - phase with 1Hr Backup (Make- Numeric, APC, Libert, Fuji,ProtekG ) 1.00 Each 1743388.00 RS: Seventeen lac Forty Three

Thousand Three Hundred Eighty Eight

202C For 80 KVA 3 - phase with 1Hr Backup (Make- Numeric, APC, Libert, Fuji,ProtekG ) 2.00 Each 1997778.00 RS: Ninteen lac Ninty Seven Thousand

Seven Hundred Seventy Eight only

203A Providing and erecting XLPE (IS:7098) (I) 88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Under ground or to be laid on wall 1150.00 Mtr 282.00 RS: Two Hundred Eighty Two

with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing or floor of following size of cables . only

For 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core)

203B For 3 1/2 core 240Sq. mm ( 120 Sq. mm 1/2 core) 450.00 Mtr 1157.00 RS: One Thousand One Hundred

Fifty Seven only

204A Providing & erecting XLPE (IS : 7098) (I) 88 ISI marked armoured Copper cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. 1100.00 Mtr 361.00 RS: Three Hundred Sixty One

heavy guage 1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing or floor of following size of cables For 4 core 4.0 Sq. mm only

204B For 4 core 25.0 Sq. mm 450.00 Mtr 1490.00 RS: One Thousand Four Hundred

205A Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring for P V C insulated armoured cable complete with outgoing tails, 40.00 Each 43.00 RS: Forty Three only

insulating tape etc. For following size cables. For 2 to 4 core 4 to 6 Sq. mm ( Comet, HMI, Dowells Make Only)

205B For 2 to 4 core 25 Sq. mm ( Comet, HMI, Dowells Make Only) 35.00 Each 61.00 RS: Sixty One only

205C For 3 & 1/2 core 50 Sq. mm ( Comet, HMI, Dowells Make Only) 40.00 Each 75.00 RS: Seventy Five only

205D For 3 & 1/2 core 240 Sq. mm ( Comet, HMI, Dowells Make Only) 8.00 Each 245.00 RS: Two Hundred Forty Five only

206A Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected 300.00 Each 8.00 RS: Eight only

to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

For 1.5/2.5 to 6 Sq.mm

206B For 25 Sq.mm 140.00 Each 25.00 RS: Twenty Five only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

207A Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & 30.00 Each 15.00 RS: Fifteen only

connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. For 25 Sq.mm..(Dowells, Comet, Cosmos make only)

207B For 50 Sq.mm..(Dowells, Comet, Cosmos make only) 60.00 Each 20.00 RS: Twenty only

207C For 120 Sq.mm. (Dowells, Comet, Cosmos make only) 5.00 Each 45.00 RS: Forty Five only

207D For 240 Sq.mm. (Dowells, Comet, Cosmos make only) 15.00 Each 85.00 RS: Eighty Five only

208A Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity with anti 2500.00 Mtr 117.00 RS: One Hundred Seventeen

rodent and ultra violet material properties with necessary connecting accessories of same material at required depth to be laid 90 cms. under ground for laying only

of cable below ground / road surface for enclosing cable and back filling the same to make ground as per original. For Outer dia. 50 mm and Inner dia. 38 mm. )

(Test Certificate to be Submitted)

208B For Outer dia. 120 mm and Inner dia. 75 mm. ) (Test Certificate to be Submitted) 380.00 Mtr 191.00 RS: One Hundred Ninty One

209 Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to following size of holes at both ends 30.00 Mtr 488.00 RS: Four Hundred Eighty Eight

Up to 100 mm bore dia

210A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to 100.00 Mtr 37.00 RS: Thirty Seven only

IS:694, IEC 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, SS nuts and bolts if required For One wire 4.00 sq. mm

210B For One wire 6.00 sq. mm 100.00 Mtr 56.00 RS: Fifty Six only

210C For One wire 10.00sq. mm 200.00 Mtr 91.00 RS: Ninty One only

210D For One wire 16.00 sq. mm 400.00 Mtr 141.00 RS: One Hundred Forty One only

210E For One wire 25.00 sq. mm 300.00 Mtr 234.00 RS:

Two Hundred Thirty Four

210F For One wire 35.00 sq. mm 80.00 Mtr 298.00 RS: Two Hundred Ninty Eight

211 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP 10.00 Sq.Mtr. 2289.00 RS: Two Thousand Two Hundred

SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP switch -busbar etc. as per Eighty Nine only

Actual space available in electrical room at site)

212 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design Including proper size approved by EIC of M.S. angles, flats, 250.00 Kg 74.92 RS: Seventy Four and Paise Ninty

bars, square pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with Asian/Nerolac make Two only

premium quality oil paint and true care red oxide metal primer,asian paint make with erection on site as per direction of engineer in charge with necessary

grouting cementing, plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

213A Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing 9.00 Each 6917.00 RS: Six Thousand Nine Hundred

as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box with Hot Deep Galvanised door having 2 nos. 180° operated hinges & 2 Seventeen only

nos. Ln key locking with silicon rubber gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile 35 mm X 7.5 mm Din Rail & MCB, Brass stud

type terminal and arrangement for cable termination to be erected on RCC foundation as per details given by manufacturer and EIC considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE 415, (3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use

suttering / farma, (6) Hot deep galvanized average 70 Micron, (7) Detail drawing will be given by corporation

For 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200 mm X 200 mm X 12 mm base plate, 4 M16 Bolts and 600 mm long hot deep

galvanized J Bolt, nuts, washers with 800 mm under ground and 200 mm above ground level and 450 mm dia. Foundation in 1:2:4 proportion. make:

Bajaj,Walmark,Transrail,Ambica (Test certificate to be submitted)

213B For 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long with necessary G.I. J 15.00 Each 5612.00 RS: Five Thousand Six Hundred

Bolts ,nuts, washers with 800 mm under ground and 200 mm above ground level and Foundation in 1:2:4 proportion as per details given by manufacturer and EIC Twelve only

considering site requirement. .Approx weight 37 kg (Make: Bajaj, Valmont, Transrail, Ambica,RR Ispat Only) (Test certificate to be submitted)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

214 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and 8.00 Each 487.00 RS: Four Hundred Eighty Seven

required size and length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC or wall bracket as per only

instruction of EIC having nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise as per site condition and suitable

welded stiffner reducer and nipple with check nut complete painted with one coat of yellow zinc and two coats of alluminium paint for Single arm bracket suitable

for pole or terrace as per design given by EIC (a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators: Bajaj, Valmont, Transrail,

Ambica, RR Ispat Only) (Test certificate to be submitted)

215 Supplying and making Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm OD and 50 turns (length of turns approx. 200 mm) and having 24.00 Each 369.00 RS: Three Hundred Sixty Nine

additional continuous streight length of 3.00 mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr deep specially prepared earth pit only

complete with salt and charcoal/coke as required for coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

216 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 45 W with broad single piece die cast aluminium housing of 8.00 Each 3512.00 RS: Three Thousand Five Hundred

broad size for better thermal managment (Appr.by EIC) , LED's mounted on high quality metal core PCB with extremely precison designed heat sink complete with Twelve only

IP66 protection Class with polycarbonate / Toughned glass cover. the fixture should be suitable for pole/bracket mounting. The fixture to comply both LM79 and

LM 80 guidelines with high power LED module min. 130lumen/watt with toughen Glass L70 at 50,000 hrs, provided with individual high quality polycarbonate

lenses for better light distribution. The Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality driver for protection

against mis Wiring,over voltage high and low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than 10%

and P.F greater than 0.95. Also the Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V, system efficiency greater than

lm/w,Operation current less thanequal to700MA, and Lumen Output of mini. 4950 Lumes, CCT greater than 5000K, CRI greater than 65, seperate high quality

lense,beam angle 120 deg, surge immunity level at least 10 KV non integral & 4 KV intrgral The Sperate Potted driver should have over current, short circuit

protection so that the fixture recovers once the fault is removed, over voltage protection. In addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. [Note: The manufacturer / authorised Channel partner of the manufacturer has to

submit 5 yr free replcement Guarantee for complete Fixture]( model approved by engineer incharge subject to above specification )

217 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max. 90 W with single piece die cast aluminium housing, high power 4.00 Each 6228.00 RS: Six Thousand Two Hundred

LED shall be mounted on high quality metal core PCB with extremely precison designed heat sink, complete with IP66 protection Class, with polycarbonate / Twenty Eight only

toughened glass cover. The fixture should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with toughen glass, L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light distribution. The wattcapacity of each LED must

be >= 4 watt in flood ligh fitting.The Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality driver for protection against

high and low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than 10% and P.F. greater than 0.95. Also

the Fixture should meet the following technical criterias. Voltage 160 to 270 V, system efficiency greater thanequal to 120 lm/w and total lumens not less than

10800, operating current less thanequal to700MA, CCT greater than 5000K, CRI greater than65, beam angle 120 deg, surge immunity level 4 kv integral & 10 kv

non integral The Separate Potted driver should have over current, over voltage protection, short circuit protection so that the fixture recovers once the fault is

removed. In addition to the above product should be operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.(Stricly

sample approved by EIC subject to tender specification) (Note: The manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)(Cool White Color/warm white/natural white ( model approved by engineer incharge subject to above specification )

218 Supplying and erecting LED Post Top Lantern fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 15.00 Each 4772.00 RS: Four Thousand Seven Hundred

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Seventy Two only

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) For Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP

For 40W Post Top Lantern

219 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as directed. 3 core 1.5 150.00 Mtr 46.00 RS: Forty Six only

sq.mm. PVC insulated round copper wire ISI mark.

220 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to be erected as directed. 4 core 1.5 380.00 Mtr 67.00 RS: Sixty Seven only

sq.mm. PVC insulated round copper wire ISI mark.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

221 Providing, erecting, testing and commissioning insu intelligent street light controller specially designed for energy saving in conventional street light system (Cat. 1.00 Each 20256.00 RS: Twenty Thousand Two Hundred

No. SLC-03-1 ph-7.5 KVA-20 Amp. / Cat. no. SLC-03-1Ph-15 KVA-20 Amp. per phase) having technical specification, 1 phase 2 wire, 230 V AC/ph, +/- 25% R Y B N 2 Fifty Six only

wire supply system, 50 Hz (+/- 10%) 2 W (Stand BY) to 4 W (at street light operation) consumption, Advance 8 bit micro controller, switching on longitude and

latitude base, accuracy of +/- 1 minute per month, with in built battery, with battery life of more than 8 years, with special device which hold the parameter for

more than 10 year without any power and password protected. 16 characters and two line LCD display with backlight, 4 keys user friendly keyboard system,

7500/15000 VA feeder pillar capacity, 60/100 Amps isolator, 3 output with termination, 40/63 Amps 2/3 pole contactor, 3 X 16 Amp., with FR cable provision to

by pass by way of relay operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing, Out door type installation on pole with

clamps (Provided with clamps and nut bolt) or wall or floor, Three locking system flush type internal panel lock, external pad lock and internal U clamp locking

systems for against theft of Panel, having 17/25 Kg weight, 18 Gauge MS weather proof box with industrial exterior powder coated with 7 tank process RAL

222 Providing & Erecting Fabricating terminal box for street light pole made from 16 G. (1.5 mm.) thick M.S. sheet having following size complete with fixing 15.00 Each 702.00 RS: Seven Hundred Two only

arrangement for terminal board, with necessary hole for 4 core 4 sq.mm. armoured copper cable entry and exit with 10 mm nipple from the box. The box shall be

provided with cover having up down movement with suitable mechanism and hinges on Top and bolting lock at bottom end. The box shall be fixed by

nos.clamps fabricated from 25 x 6 mm flat. The box shall be powder coated paint or good oil paint inside & outside of the box. The size of box should be 300 x

240 x 140 mm. (depth). Also providing & fixing terminal board of size 230 x 125 x 6 mm bakelite sheet with 15 Amp. copper/brass kitkat pattern porcelain fuse

unit mounted on suitable size of bakelite terminal plate. (Asian colour must be used)

223 Providing and erecting water cooler having storage capacity 40 Ltr. & cooling capacity 15 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water 6.00 Each 35265.00 RS: Thirty Five Thousand Two

should drop by 15˚C within a hour, The water cooler should be comprising of hermetically sealed compressor Reciprocating compressor with R134A gas , fan Hundred Sixty Five only

motor, Copper Condensing unit, fan motor, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel, CP brass push cock, inlet float valve, with all plumbing and electrical accessories, inlet, outlet,

overflow and PVC drain out connection to FD complete as required With 20 Amp. 3 pin plug Top with indicator. (This item including comprehensive service &

maintanance including Spare Parts & consumable item during warranty period of one year. Maintanance & service must be carried out by OEM dealer/distributer

who has executed the work. Service & Maintance must be as per OEM guid line.) (Agency has to give AMC to water cooler OEM / authorized dealer upto defect

liability period] [ Make Voltas, Bluestar, Usha model approved by EIC as per specification]

224 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter 6.00 Each 15466.00 RS: Fifteen Thousand Four Hundred

GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high pressure switches with Sixty Six only

following LPH capacity & erected as directed .For 25 Ltr / Hr [make: ION EXCHANGE, AQUAGUARD, KENT, Eureka Forbes, Rain Drop approved by EIC as per

225 The purpose of RO plant is cater the portable and drinking water 24X7 to beneficiary.So we have taken comprehensive maintenance contract item in this tender. 6.00 Each 13919.00 RS: Thirteen Thousand Nine

Agency has to give All in All maintenance contract to OEM of RO plant and submit AMC copy to GSPHCL at the time of final bill.Agency has to submit FDR of Rs Hundred Ninteen only

83514.00+ GST or quoted amount whichever is higher to GSPHCL. Which will be released after successful completion of AMC & at the end of defect liability

period. AMC consist of general service & Filter shall be replaced at every 3 months.Membranes & booster pump shall be repaired/ replaced whenever

required.Agency has to stick maintenance schedule on the RO plant and date of service, TDS of water, discharge of water etc. shall be written on this.Agency has

to receive certificate from beneficiary every year and submit at the time of releasing SD. For 25 ltr RO plant

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

226 Supplying and erecting, commissioning and testing Diesel Generating set confirming to IS: 4722:1968 & BS:5514 per the latest CPCBIV+ norms having 1.00 Each 669153.00 RS: Six lac Sixty Nine Thousand One

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed Water cooled diesel engine with multi cylinders developing suitable Hundred Fifty Three only

BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours Cost including liaison work i.e. Preparation of site plan tracing & its

blue prints, Site plan approval from Energy & Petro. div., KWH Meter testing for D.G. Set, Site test report & other license stamped letter issuing, Certificate from

Elect. Inspector, Registration at Elect. Duty wing, Kutch. D.G.Set inclusive::: Testing: Testing means full load & 10% over load testing of D.G.Set at Company /

Dealer work shop. Cost inclusive of Diesel, To & Fro Fair, Lodging boarding etc. of two engineer of corporation. Also Diesel provide in Diesel tank At the time of

handing over D.G.Set to Benficial

Diesel Engine: Multi Cylinder in line configuration, water coolded, Turbocharged after cooled, Naturally Aspirated, Heavy duty suitable for generating set

application, developing Suitable BHP @ 1500 RPM, under NTP conditions with an overload capacity of 10% for any one hour in any 12 hours, Deisel Engine will be

as per the latest CPCBIV+ norms. Vertical totally enclosed, electric start, compression ignition, 4 stroke, designed to run continuously at 1500 RPM Standard

Complete with Radiator with fan, Fuel Pump, Electronics Governor G3 as per ISO 8528 Part V class , Lube Oil & fuel Filter, Diesel Filter, Dry type Air cleaner with

service indicator, Flywheel Housing and Flywheel to suit single bearing Alternator, Residential type Silencer, Electrical Starter Motor 12/24 V ( as per Company

Design ) with soft starting system, CRDI System, DOC, SCR, IOT Remote Monitoring System, Engine control panel , Battery charging Alternator, first fill of lube oil

& coolant having safety of Low lube oil pressure, High water Temperature.

Alternator: suitable for continuous operation rated at 1500 rpm, 415 V, 0.8 PF, 50 HZ, 3Ph, Class H insulation, IP 23 SPDP Enclosure, self excited & self regulated

Brush less with voltage regulation of +1 % of rated load from no load. confirming IS:4722, BS EN 60034 1 & will be suitable for tropical condition.

Standard Control Panel: Cubicle type set mounted standard logical auto on /off facility control panel consists of Microprocessor based genset controller & AMF

logic wiring & necessary relay, contactor , MCB etc with hinged doors, bottom gland plate manufactured with 16/18 SWG CRCA sheet provides: MCCB of suitable

rating & shall be ICS equal to 100% ICU , Current Transformer, Aluminum/ Copper bus bars of suitable capacity with incoming & Outgoing terminations, LED

Indication lamps for DG ON & LOAD ON, battery charging alternator fail indication, Set of Instrument fuces, Emergency Stop Push button. The controleer has all

the basic safeties and protections.

Base Frame: Sturdy, fabricated, welded construction, channel iron base frame for mounting the above Engine & Alternator & Acoustic Enclosure. Set will have

nos. AVM of suitable capacity.

FUEL TANK: 8 Hrs Capacity , with Inlet & Outlet arrangement with air vent & drain plug arrangement.

Batteries: As per manufacture starter Design voltage requirement , battery make and model aproved EIC, Dry Uncharged batteries with leads, terminals &

Battery Charger.

Accoustic Enclosure Canopy: Providing, fitting & testing Sound Attenuated Container acoustic modular enclosure as per latest CPCB norms are insulated with the

fire retardant & noise absorbent foam/ rockwool so as to comply with noice level of 75 db (A) at 1 meters distance in OPEN free field environment as per ISO

8528 part 10 Specified by ministry of Environment & Forest with accessories i.e. Anti vibration Mounts, protected by LLOP & HCT / HWT, Residential silencer in

lieu of industrial silencer, Exhaust piping from exhaust manifold to residential silencer fitted on top / inside the container. If required exhaust piping extension is

to be taken from the residential silencer, Fuel piping from fuel tank to engine & return line from engine to fuel tank, Doors with locking arrangement, Weather

proof and can be placed in open sky, Fabricated with CRCA sheet metal components are 9 tank Pre treated and is Polyster based powder coated ( inside as well

as out side) for long life. of acoustic foam, Adequate ventilation to meet air requirement for smooth running of Engine, Modular construction, easy to dismantle

and refitting if required to shift from one place to another. Loading and unloading of above item shall be done by hydra and skill work force under supervision of

Electrical Engineer and guide line given by OEM to avoid damge to the item. picture of it to be submitted in RA/Final bill

Continuous rating of 62.5KVA, BHP not less than 76 BHP with including full tank diesel, Heavy Duty standard oil M.S. Barrel & Diesel Filling hand Pump of

required capacity & with obtaining all necessary certificate from Electrical Inspector.( Agency has to give service & All in All maintanance contract to OEM During

defect liability Period .Agency has to replace oil,Diesel,filter,air filter etc as per site reguired & working hour of D.G set. Agency has to Provide fitness

certificate.)(Diesel Engine cummins, Mahindra, koel, caterpiller) (Alternator crompton, stamford, Leroy Somer)

227 providng and erecting Approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire. 2.00 Each 2586.00 RS: Two Thousand Five Hundred

Eighty Six only

228 providng and erecting Suitable set of CTS for 100A Energy Meter 6.00 Each 2085.00 RS: Two Thousand Eighty Five

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

229 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 1.00 Each 2876.00 RS: Two Thousand Eight Hundred

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & washers Seventy Six only

suitable for erection on pole with cable clamps& earth bolt of following size of box.For 505mm x 240mm x 160mm [deep]

230 Executing comprehensive (All -in-All) service & manitenance with spare parts as per terms & condition of tender DG manufacturer for defect liability period. For 1.00 Each 40149.00 RS: Forty Thousand One Hundred

that main agency has togive All-in-All comprehensive maintenance contract to DG manufacturer and copy of this contract will be submited before final bill. Forty Nine only

Agency has to quote rate accordingly. Agency has to also provide the fitness certificate from DG manufacturer and submit to GSPHCL. Agency has to Compulsory

submit FDR of approved bank as per clause 2.0 section 3 Rs.40149.00+ GST or quoted rate which ever is higher to GSPHCL.for minimum maturity period of five

years in favour of GSPHC . Which will be releared after successful completion of AMC & at the and of defect liability period. DG OEM has to mantain written record

of service & maintenance during defect liability daily period duly sigh by police dept. and submited regularly to GSPHCL. in any case without submitting FDR final

bill submission will not be done. DG agency has to do maintanance as per terms & condition In tender. Agency have Replace outer Air element ,Filter Element

Primary, Oil Filter, Filter Element Secondary, Gesket, battery, charger, Valve Cover, Belt Alternator, Fan Belt, Lube Oil, Coolent etc.Cost Of Diesel not Included in

this item during defect liability Period as per site required & working hours of DG set, OEM has to Provide Fitness certificate at time of releasing S.D

( For 62.5 KVA DG Set )

231 Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed 1.00 Each 56780.00 RS: Fifty Six Thousand Seven

below: Hundred Eighty only

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps

for Generator ON, Mains ON, Load and suitable control terminals and power terminals with neutral earthing studs.For ATS Panel for 62.5KVA 3 phase DG Set

232 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (A)7 core 1.5 Sq. mm 80.00 Mtr 115.00 RS: One Hundred Fifteen only

233 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, 17.00 Each 1991.00 RS: One Thousand Nine Hundred

Stored Pressure Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Ninty One only

Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig

welded, EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating -

Pure Polyester Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release with safety Pin is of SS material, Made up from

1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following

printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering

/ marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, ,CEASEFIRE)

234 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 17.00 Each 6526.00 RS: Six Thousand Five Hundred

Meter Wire Braided Hose & Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Twenty Six only

Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body

confirms to IS 7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM

has to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date must

be mention on Extinguisher 4. Refilling period must be of 5 Years. Following Printed marking on equipment must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, ,CEASEFIRE)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

235 Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono Ammonium Phosphate powder 50% Confirms to IS 4308, Applicable fire classes A,B & C, 1.00 Each 5240.00 RS: Five Thousand Two Hundred

UGTS Pressure Gauge, Can Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick sheet, Body Construction Deep Drawn with MIG Welding Forty only

technology, Brass forged sprinkler valves with Nozzle is specially designed to give more than 99% discharge. Together with orifice characteristic to cover

adequately fire risks with scattering cone of 40 to 45° Angle. External Pure polyester (UV resistant) and Internal Epoxy polyester powder coated, Heat Sensitive

Glass bulb of 68 °C. Area covered will be 2-2.5 m2 and volume of coverage is 7 m3. Referance Weight:-Empty Weight 2.64 kg, Full weight 7.64 kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has to provide heavy duty wall/ Ceiling mounting Bracket/ clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

TOTAL ELECTRICAL AMOUNT

TOTAL CIVIL + ELECTRICAL AMOUNT

Asst. Engineer Dy.Exe. Engineer Exe. Engineer

Gandhinagar Gandhinagar Gandhinagar