Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹2.5 L
Closing Date
9 Sept 2026, 5:00 pmClosed
Krishna Bhagya Jala Nigam Limited
Vittal Tubaki
Refurbishing, Dismantling, Overhauling ,Servicing and Erection of VT pumps of Dc-1 and Dc-2 including Special purpose high performance Glass flake filled corrosion protection and efficiency improvement coating of corrocat for pumps and supplying of necessary spares at TLIS & ARBC Headwork.
KBJNL/2026-27/LI/WORK_INDENT3726
KBJNL/2026-27/LI/WORK_INDENT3726
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KBJNL Division Dam Division Almatti
9 documents required · 9 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.,2021-22, 2022-23, 2023-24, 2024-25& 2025-26.The intending bidder in his/its name should have in the last 5 years i.e,2021-22 to 2025-26 achieved in at least 2 financial years, a Minimum financial turnover of Rs. 329.52 Lakhs.(usually not less than two times the estimated annual payments under this contract). The turnover prior to FY 2025-26 will be updated to the Present Price Level by giving weight age of 10% each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished.FY 2026-27.
The intending bidder should have in last 5 years i.e. from 2021-22 to 2025-26, Satisfactorily completed (not less than 90% of the contract value), as prime contractor, one similar work costing not less Rs. 82.38. lakhs (50% of the amount put to tender) in last five years reckoned back from 2025-26)(Up to last date of submission bid)(The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division. The cost will be updated to the present value by giving a weightage of 10% each year.)if the work is completed prior to FY 2026-27.Note-1) Similar work means:-Operation and Maintenance/AME Of Major LIS Headwork
The intending bidder should have executed minimum quantity of work in any one financial year, during the last five financial years reckoned from 2025-26 (I.E 2021-22 TO 2025-26). . (1) Dismantling, Overhauling ,Servicing and Erection of VT pumps Capacity not less than 650 Kw and above is equals to 3.00 Pumps. The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division
The intending bidders should be a registered contractor enrolled in valid CEIG Registered Electrical Class-I & above registration contractors
Valid Employees Provident Fund Registration Certificate
The Requisite Earnest Money Deposit in(E-cash)
Bidder should furnish liquid assets and/or availability of credit facilities of not less than Rs.41.19 Lakhs from any Nationalized /scheduled bank (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. (Usually the equivalent of the estimated cash flow for 3 months in the peak construction period)). The format for Bankers Certificate / Line of Credit (BC/LOC) letter to be issued by the Banks as per circular No. FD-CAM/16/2022(P-2) dated: 22-08-2022.
Bid Capacity-Tenderers who meet the above specified minimum qualification criteria, will only be qualified, if their available tender capacity is more than the total tender value (Rs.164.76 Lakhs).The available tender Capacity will be calculated as under Assessed available tender Capacity is (AXNX1.5 - B), where,A is Maximum value of civil engineering works Executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years (1 years i.e 12Months ) prescribed for completion of the works for which tenders are invited.Bis Value,at 2026-27 price level, of existing commitments and on going works to be completed during the next 12 months (Period of completion of the works for which tenders are invited) Note-(i) The statements showing the value of existing commitments and on going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.Financial turnover of previous years indicated in clause 3.2 and 3.4 above shall be given a weight of 10% per year to bring them to the price level of (Year inviting the Tender) (ii)Even though the Tenderers meet the above criteria, they are subject to be is qualified if they have (a) made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or (b)record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or(c) participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. d) If the bidder / bidders have participated in more than one work, the available tender capacity will be assessed and number of works will be awarded as per his available bid capacity.
Valid GST Registration Certificate mandatory. Notes a)The Successful bidder shall furnish within 20 days from issue of letter of intent before entering in to agreement, a Copy of Income Tax returns filed mentioning PAN for the financial year 2026-27 (Assessment year 2027-28) prior to date of entering in to the agreement. Failing which the EMD amount will be forfeited and the tender will be rejected and the bidder shall be liable for subsequent penal action including black listing. b)The amount put to tender is exclusive of GST and the tenderer should quote without GST. However G.S.T will be paid at prevailing rate during billing
₹4,120
₹2.5 L
4 Sept 2026
29 Aug 2026
11 Sept 2026
4 Sept 2026
5 Sept 2026
Refurbishing, Dismantling, Overhauling ,Servicing and Erection of VT pumps of Dc-1 and Dc-2 including Special purpose high performance Glass flake filled corrosion protection and efficiency improvement coating of corrocat for pumps and supplying of necessary spares at TLIS & ARBC Headwork
Dismantling and identification of Spares of vertical turbine pump of M/s Kirloskar Brother Ltd, make BHM-100 of Capacity (1050 kw) Pump No-2, by decoupling of HT motor including dismantling of bearin...
Erection of the dismantled Kirlosker Brothers Ltd make BHma 100 VT of Capacity (1050 kw), Pump No-2, pump Standard make after cleaning of the all dismantled parts of pump by wire brush complete assemb...
Efficiency improvement,energy conservation and long term corrosion protection in pumping systems by way of Fluiglide coatings including Dry Compressed air at 6 to 7 kg/cm2 & 350 CFM and By abrasive bl...
Supply of Head Shaft sleeve of part no 310-558 Costion of material Stainless steel-410 For Pump Type BHMA-100 Single Stage. with all lead and lift and as directed by engineer-in-charge.
Supplying of Int Shaft sleeve of part no 312-558 Costion of material Stainless steel-410 For Pump Type For Pump Type BHMA-100 Single Stage.with all lead and lift and as directed by engineer-in-ch...
Supply of Shaft sleeve of part no 316.2-558 & make/code ST ST ASTMA 276-410 340 For Pump Type BHMA-100 Single Stage. with all lead and lift and as directed by engineer-in-charge.
Supply of Gland packing of part no 430-345 & make/code CHAMPION 1094 (TIWA). with all lead and lift and as directed by engineer-in-charge.
Split Ring part no 253 & make/code ST ST ASTMA 276-410 ANLD .with all lead and lift and as directed by engineer-in-charge.
Supply of Trans/Thordan Bearing of part no 357-391 & make/code Thordan BRG For Pump Type BHMA-100 Single Stage.(Colum Pipe).with all lead and lift and as directed by engineer-in-charge.
Supply of Thordan Bearing of part no 354.1-391 & make/code Thordan BRG(Pump Bowl).with all lead and lift and as directed by engineer-in-charge.
Supply of Thordan Bearing of part no 354.2-391 & make/code Thordan BRG(Pump Bowl).with all lead and lift and as directed by engineer-in-charge.
Supply of Thordan Bearing of part no 353-391 & make/code Thordan BRG(Bell Mouth).with all lead and lift and as directed by engineer-in-charge.
Supply of Thordan Bearing of part no 352.1-391 & make/code Thordan BRG (Stuffing box ).with all lead and lift and as directed by engineer-in-charge.
Supply of lock washer of part no 410-153 & make/code.with all lead and lift and as directed by engineer-in-charge.
Supply of washer of part no 409-041 & make/code.with all lead and lift and as directed by engineer-in-charge.
Supply of Rubber bush (Coupling) of part no 400-370.with all lead and lift and as directed by engineer-in-charge.
Supply of (Coupling Pin of part no 404-053).with all lead and lift and as directed by engineer-in-charge.
Supply of Set of O-ring for pump .with all lead and lift and as directed by engineer-in-charge.
Supply of Nut, Bolt & Washer (M30 x 15omm) ss.with all lead and lift and as directed by engineer-in-charge.
Supply of Thrust Bearing cooling pipe.with all lead and lift and as directed by engineer-in-charge.
Supply of spring washer 6mm T SS-410 .with all lead and lift and as directed by engineer-in-charge.
Supply of Thrust block assembly holding rod.with all lead and lift and as directed by engineer-in-charge.
Repair and Fabrication Including of Materials. and Fabricated of Strainer-502.with all lead and lift and as directed by engineer-in-charge.
Overhauling and Servicing of Remote control desk, replacement of requisite spares and check all the terminals and cabling at ARBC HW.with all lead and lift and as directed by engineer-in-charge.
Supplying of Wet & Dry Vacuum Cleaner Suitable for Household, 50 Liter Stainless Steel Tank with 1800 Watt and Low Sound.@ARBC HW.with all lead and lift and as directed by engineer-in-charge.
Dismantling and identification of Spares of vertical turbine pump of M/s Kirloskar Brother Ltd., make BHQ-62 of Capacity (800 kw), by decoupling of HT motor including dismantling of bearing housing,...
Erection of the dismantled Kirlosker Brothers Ltd make BHQ-62 of Capacity (800 kw),VT pump Standard make after cleaning of the all dismantled parts of pump by wire brush complete assembling of the pu...
Efficiency improvement, energy conservation and long term corrosion protection in pumping systems by way of Fluiglide coatings including Dry Compressed air @6 to 7 kg/cm2 & 350 CFM and By brasive blas...
Dismantling and identification of Spares of vertical turbine pump of M/s Kirloskar Brother Ltd., make BHR-80 of Capacity (650 Kw), by decoupling of HT motor including dismantling of bearing housing...
Erection of the dismantled Kirlosker Brothers Ltd make BHR-80 of Capacity (650 Kw), VT pump Standard make after cleaning of the all dismantled parts of pump by wire brush complete assembling of the pu...
Efficiency improvement, energy conservation and long term corrosion protection in pumping systems by way of Fluiglide coatings including Dry Compressed air @ 6 to 7 kg/cm2 & 350 CFM and By brasive bla...
Bush Part No.4000101, Material of Construction:Natural Rubber .with all lead and lift and as directed by engineer-in-charge@Dc-1 of TLIS.
Washer Part No.4090101, Material of Construction:MS IS:2062 Fe410 WA.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Coupling Pin Part No.4040101, Material of Construction:CS IS 1570-40 CB.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Coupling Nut Part No.4080101, Material of Construction:IS1367 PART-6 CL GALV STYLE-1.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Split RingPart No.4050101, Material of Construction:ST ST ASTMA 276-410 ANLD.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Column pipe Shaft Sleeve Part No.3120101, Material of Construction:ST ST ASTMA 276-410 250-280 BHN.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Bowl Shaft Sleeve Part No.3160101, Material of Construction:ST ST ASTMA 276-410 250-280 BHN .with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Column pipe Trans. BearingPart No.2790101, Material of Construction:NEO RUBBER LND BR-2 SHELL .with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Bowl Bearing Part No.3540101, Material of Construction:NEO RUBBER LND BR-2 SHELL.with all lead and lift and as directed by engineer-in-charge.@Dc-1 of TLIS.
Bush Part No.4000101, Material of Construction:Natural Rubber.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
WasherPart No.4090101, Material of Construction:MS IS:2062 Fe410 WA.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Coupling Pin Part No.4040101, Material of Construction:CS IS 1570-40 CB.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Coupling Nut Part No.4080101, Material of Construction:IS1367 PART-6 CL GALV STYLE-1.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Split RingPart No.4050101, Material of Construction:ST ST ASTMA 276-410 ANLD.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Column pipe Shaft SleevePart No.3120101, Material of Construction:ST ST ASTMA 276-410 250-280 BHN.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Column pipe Trans. Bearing Part No.3570101, Material of Construction:NEO RUBBER LND BR-2 SHELL.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Bowl Shaft SleevePart No.3160101, Material of Construction:ST ST ASTMA 276-410 250-280 BHN.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Bowl BearingPart No.3540101, Material of Construction:NEO RUBBER LND BR-2 SHELL.with all lead and lift and as directed by engineer-in-charge.@Dc-2 of TLIS.
Supply of oil Level Indicator.with all lead and lift and as directed by engineer-in-charge.
Supply of Temperature Indicator.with all lead and lift and as directed by engineer-in-charge.
Repair and Fabrication Including of Materials. and Fabricated of Strainer-502 @TLIS HW..with all lead and lift and as directed by engineer-in-charge.
Supply of Nut, Bolt & Washer M24 x 100 mm SS-410.with all lead and lift and as directed by engineer-in-charge.
Overhauling and Servicing of Remote control desk, replacement of requisite spares and check all the terminals and cabling at TLIS HW..with all lead and lift and as directed by engineer-in-charge.
Supplying of Wet & Dry Vacuum Cleaner Suitable for Household, 50 Liter Stainless Steel Tank with 1800 Watt and Low Sound@TLIS HW..with all lead and lift and as directed by engineer-in-charge.
Supplying of Vacuum contractor 6.6kv 400A Control Supply Voltage 110Vac for SOFT STARTER@TLIS HW..with all lead and lift and as directed by engineer-in-charge.
Overhauling,Servicing & testing of 6.6kv HT Brakers panel,Removing of burnt bus bar insulation of 6.6KV Breaker,Replacement of feeder Spout,Ht Insulator,Nut Bolts and all fittings Charges at ARBC Head...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
dRAWINGS TENDER PURPOSE ONLY.pdf
Others - drawings • 2.34 MB
BOQ.pdf
Others - Schedule B • 4.76 MB
Scope of work and technical specifications.pdf
Others - Technical specification • 8.22 MB
corrocat DTP.docx
Tender Document • 21.47 MB
proceedings.pdf
pdf • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .