Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹19.4 L+₹41,290 (2.17%)Rejected-Finance 19192 STREET NO 8 BIBI WALA ROAD OPPOSITE DAV COLLEGE BATHINDA PUNJAB PIN 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹19.6 L+₹63,590 (3.35%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹19.7 L+₹67,770 (3.57%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S MANI GARG CONTRACTOR L2 | MOHAMMAD RASHID L1 | M/S GOYAL ASSOCIATES L3 | MS FUTEC ENGINEERS L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engr-in-Charge. | 70 | Cubic Metre | 120 ₹8,400 | 300 ₹21,000 | 100 ₹7,000 Lowest | 200 ₹14,000 |
| 2.00 | M&L for Brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. | 50 | Cubic Metre | 7,000 ₹3,50,000 | 5,000 ₹2,50,000 | 4,500 ₹2,25,000 | 4,000 ₹2,00,000 Lowest |
| 3.00 | M&L for Brickwork with subclass ‘B’ bricks, ( Except Bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. | 20 | Cubic Metre | 1,800 ₹36,000 Lowest | 2,000 ₹40,000 | 2,500 ₹50,000 | 2,200 ₹44,000 |
| 4.00 | M&L for providing cement concrete Type B-0 (1:2:4) (12.5mm graded crushed stone aggregate) as in copings, bed plates, bed block & hold fasts etc. Including necessary form work complete all as specified and directed by Engr-in-charge. | 3 | Cubic Metre | 3,200 ₹9,600 | 4,000 ₹12,000 | 3,000 ₹9,000 Lowest | 4,500 ₹13,500 |
| 5.00 | M&L for precast (Factory made) cement concrete blocks Type B-1 (1:2:4) (20mm graded aggregate) as in bed blocks, kerbs etc, setting in cement mortar 1:4, dismantling old kerb stone and removing out side defence land, complete all as specified and directed . | 1.5 | Cubic Metre | 5,000 ₹7,500 Lowest | 6,000 ₹9,000 | 6,000 ₹9,000 | 7,000 ₹10,500 |
| 6.00 | Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge. . | 1,500 | Square Metre | 10 ₹15,000 | 20 ₹30,000 | 5 ₹7,500 Lowest | 20 ₹30,000 |
| 7.00 | M&L for rendering cement plaster 15 mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces, is to be finished fair & even without using extra cement complete all as specified and directed by Engr-in-charge. | 2,500 | Square Metre | 190 ₹4,75,000 | 140 ₹3,50,000 | 125 ₹3,12,500 Lowest | 130 ₹3,25,000 |
| 8.00 | M&L for Rough cast plaster After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed, including taking down cement plaster and racking out joints, hacking for key scrubbing down with water etc, complete all specified and directed by Engr-in-Charge
Note:- WPC shall be measured and paid separetely | 1,500 | Square Metre | 70 ₹1,05,000 Lowest | 210 ₹3,15,000 | 320 ₹4,80,000 | 280 ₹4,20,000 |
| 9.00 | Supply only integral WPC as per manufacture instructions ) complete all as specified. | 150 | Kilogram | 60 ₹9,000 | 100 ₹15,000 | 40 ₹6,000 Lowest | 40 ₹6,000 Lowest |
| 10.00 | M&L for keyed pointing to brick wall in cement mortar (1:3) complete all as specified and directed by Engr-in-charge. | 20 | Ten Square Metre | 400 ₹8,000 Lowest | 500 ₹10,000 | 500 ₹10,000 | 500 ₹10,000 |
Tender Value
₹29.9 L
EMD Value
₹59,860
Closing Date
10 Sept 2025, 6:00 pmClosed
GE (AF) MC CHANDIGARH
GE (AF) MC CHANDIGARH
REPAIR / MAINT OF APPROACH PATH, HARDSTANDING, FENCING, BOUNDARY WALL AND STEEL GATES IN SECTOR 31 UNDER GE (AF) MC CHANDIGARH
2025_MES_725864_1
GE (AF) MC/CHD/T-31/2025-26
Open Tender
Civil Works
Item Rate
180 days
CHANDIGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹59,860
Yes
14 Oct 2025
13 Aug 2025
12 Sept 2025
13 Aug 2025
10 Sept 2025
27 Aug 2025
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engr-in-Charge.
M&L for Brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
M&L for Brickwork with subclass ‘B’ bricks, ( Except Bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
M&L for providing cement concrete Type B-0 (1:2:4) (12.5mm graded crushed stone aggregate) as in copings, bed plates, bed block & hold fasts etc. Including necessary form work complete all as specified and directed by Engr-in-charge.
M&L for precast (Factory made) cement concrete blocks Type B-1 (1:2:4) (20mm graded aggregate) as in bed blocks, kerbs etc, setting in cement mortar 1:4, dismantling old kerb stone and removing out side defence land, complete all as specified and directed .
Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge. .
M&L for rendering cement plaster 15 mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces, is to be finished fair & even without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for Rough cast plaster After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed, including taking down cement plaster and racking out joints, hacking for key scrubbing down with water etc, complete all specified and directed by Engr-in-Charge Note:- WPC shall be measured and paid separetely
Supply only integral WPC as per manufacture instructions ) complete all as specified.
M&L for keyed pointing to brick wall in cement mortar (1:3) complete all as specified and directed by Engr-in-charge.
M&L for broken glass coping on top of walls in cement mortar (1:3) complete all as specified and directed by Engr-in-charge.
M&L two coats of cement based paint on plastered/ brick surfaces of walls including preparation of surfaces including priming plastered and other surafce with alkali resistant primer paint complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (Below or above ground level) complete and removing of unserviceable material out side MD land exceeding 5.00 Km and cleaning site , complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in plinth protection /flooring complete all as specified and directed by Engr-in-Charge.
M&L for 28 mm Wide Plastic dividing strips, 1.5mm thick, inserted in position, conforming to design complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:4:8) type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.
M&L spike rolling to surface or making impressions of expanded metal ,whilst the convrete is green complete all as specified and directed by Engr-in-Charge.
M&L 25 mm sand cushioning for interlocking tiles including well rammed and consolidation all as per direction by Engr-in- Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.and removing of unserviceable material out side MD land exceeding 5.00 Km and cleaning site , complete all as specified and directed by Engr-in-Charge.
M&L for rubbberised machine pressed pre polished precast concrete interlocking paver block any shape, size , desired colour and pattern conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment , complete all as specified and directed by Engr-in Charge.
All as per item above but refixing old dismantling interlocking tiles, complete all as specified and directed.
M&L Chequred cement pre polished concrete tiles 400X 400X 25 mm thick of desired pattern and colourset ,jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20 mm thick screed bed cement mortar 1:6 complete all as specified and directed by Engr-in Charge.
Excavating in trenches not exceed 1.5 mtr wide and not exc 1.5 metre in depth for foundation etc or for shafts, wells cess pit, man holes pier holes etc not exceed 10 Sqm on plan and not excced 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.
Returning , filling in , including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge..
Removing excavated material exc. 1.5 but n. exc. 5.00 Km and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge.
Dismantling old posts or struts embedded in concrete block of any section, including taking out embedded portion and making good disturb ground, complete all as specified and directed.
Excavating in post holes in soft /loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-Charge.
M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes , notching for wire, etc flat iron fillets (for securing wire mesh etc, ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engr-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc complete all as specified and directed by Engr-in-Charge.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10cm long. ( Diameter of neck in 5 to 10 mm) Complete all as specfied and directed by Engr-in-Charge
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
S&F in Repairs Galvanised 2 strand ,steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standerd rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire ,staples or steel pins ,etc as directed by Engr-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engr-in-Charge.
S & F Framed work as in doors/ gates/ chajjas of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W (Gde E- 250) -A quality) complete all as specified and directed by Engr-in-Charge.
S & F for Fibre glass reinforced translucent corrugated sheeting of thickness 2mm with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surface of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed by Engr-in-charge.
M&L for Removing of debris/loose (already excavated) soil exceeding 5.00 Km from the starting out side MoD land from the complete all as specified and directed by Engr-in-Charge.
Note :- Amount of credit of Rs. 35500.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.
M/S MANI GARG CONTRACTOR (BID ID -3411919)
M/S GOYAL ASSOCIATES (BID ID -3415094)
MS FUTEC ENGINEERS (BID ID -3415198)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .