Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAccepted-AOC AT DHAMUNIPANGA PO DHAMUNIPANGA PS KALYANSINGHPUR DIST RAYAGADA PIN 765016 | DHAMUNIPANGA | RAYAGADA | ODISHA | 765016 | ₹1.5 Cr | L1 | Accepted-AOC Winner of the Lottery |
| 2 | L1₹1.5 CrRejected-AOC | ₹1.5 Cr | L1 | Rejected-AOC Looser of the Lottery |
| 3 | L1₹1.5 CrRejected-AOC | ₹1.5 Cr | L1 | Rejected-AOC Looser of the Lottery |
| 4 | L1₹1.5 CrRejected-AOC AT P O BALIBIL PS BARIRAMCHANDRAPUR DIST JAJPUR M 7381216127 | 738121 | ₹1.5 Cr | L1 | Rejected-AOC Looser of the Lottery |
| 5 | L1₹1.5 CrRejected-AOC | ₹1.5 Cr | L1 | Rejected-AOC Looser of the Lottery |
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
10 Dec 2025, 5:00 pmClosed
CCE,Kanupur Irrigation Project,Basudevpur
O/o the CCE,Kanupur Irrigation Project,Basudevpur
Construction of UP school Building along with Kitchen, boundary wall, Electrification and Sanitary work at Kumulanali (Dhobakuchuda) R and R Colony For the DPs of Village Dhobakuchuda Of Kanupur Irrigation Project
2025_KPRIP_121899_2
CCE,KIP(KRC AND BD)-06/2025-26
National Competitive Bid
Civil Works - Buildings
360 days
SE Kanupur Reh. C and B Division Basudevpur
Please refer tender documents
3 documents required · 3 mandatory
₹10,000
₹1.8 L
Yes
7 Apr 2026
25 Nov 2025
11 Dec 2025
25 Nov 2025
10 Dec 2025
25 Nov 2025
25 Nov 2025 - 10 Dec 2025
Earth work in excavation of foundation in all kind of soil such as stoney earth ,gravels mixed with stone and boulder not exceeding 0.014cum in volume within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department.
Filling foundation and plinth with excavated material with well compacted etc. complete as per the direction of the Engineer-in-charge.
Supplying and filling in foundation and plinth with sand including watering ramming cost, conveyance and royality of all materials and cost of labour with T&P required for the work etc. complete ( measurement will be taken in finished compacted section only) and as directed by the Engineer-in-charge.
Cement concrete ( 1:3:6) in foundation and floors (i.e below the base course of terrace flooring) using 4 cm size black hard crusher broken granite stone metal (free from weathered skinned & debris etc.) of approved quality and from approved quarry including lowering laying ramming concrete watering and curing etc. complete to required levels including cost and conveyance and royalities of all materials and cost of all labour with T& P required for the work complete and as directed by the Engineer-in-charge .
Reinforced cement concrete M-20 with 20mm size & down graded h.g. crusher broken chips for R.C.C. works including hoisting & laying including cost, conveyance, royalty of all materials, t&p required for the work, curing labour charges etc all complete (excluding cost of steel) & as per the direction of the Engineer-In-Charge.
RCC/CC (1:2:4) with 12mm size black hard CB granite chips with watering and curing excluding shuttering but including cost,conveyance ,royalty of all materials ,labour ,T& P etc complete .
Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.. a) Foundation footing and column base & plinth beam.
Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.b) Column & beam.
Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.c ) Lintel
Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.d)Chhaja, Roof slab & shelves.
Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. E) R.C.C. stairs excluding landing but including railing
Providing F.A. Brick masonry in C.M. (1:6) using F.A. bricks of approved quality having crushing strength not less than 75 kg/cm2 in including all costs, conveyance and royalty of all materials and cost of all labour with T & P required for the work and with all leads, lifts & delifts including watering, curing & scaffolding etc. all complete as per per drawing & specification and as directed by the Engineer-in-charge.a) Foundation and plinth
Providing F.A. Brick masonry in C.M. (1:6) using F.A. bricks of approved quality having crushing strength not less than 75 kg/cm2 in including all costs, conveyance and royalty of all materials and cost of all labour with T & P required for the work and with all leads, lifts & delifts including watering, curing & scaffolding etc. all complete as per per drawing & specification and as directed by the Engineer-in-charge.B)Super Structure
Providing fly ash brick (1:4) with cost ,Conveyance ,royalty of all materials with labour etc Comlete and as per the direction of Engineer -in-charge
12 mm thick cement plaster (1:6) finished smooth to in side surface of brick walls after racking out the joints including watering and curing ,scaffolding if required with cost ,Conveyance ,royalty of all materials with labour etc Coplete and as per the direction of Engineer -in-charge.
16mm thick cement plaster (1:6) using good quality of sharp clean washed sand of approved quality in all floors finished smooth to inside rough surface of brick wall with scafolding after racking out the joints including watering, curing, cost, conveyance, royalty of all materials and cost of all labour, T & P etc. required for the work complete and as directed by the Engineer-in-Charge.
6 mm thick CP (1:4) to RCC / CC sufaces finished smooth including closed deep chiping and slury treatment etc. complete as directed by the Engineer-in-Charge.
2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size hand broken granites chips complete as per the direction of the Engineer-in-Charge.
Providing 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size crusher broken granite chips (free from weathered skin and debris etc.) on new works including watering and curing including cost, conveyance, royalty etc. of all the materials and labour etc. complete as per the direction of the Engineer-in-Charge.
12mm thick cement plaster (1 : 4) over brick work with cement punning for skirting per 1 Sqm. including cost, conveyance, royalty etc. of all the materials and labour etc. complete as per the direction of the Engineer-in-Charge.
Distempering two coats to inside walls with distemper of approved shade on new work ( two coats) including cost of all materials, labour, T & P etc complete as per direction of Engineer in charge.
Priming one coat with any approved primer both inside and out side wall including cost of primer, labour, T & P etc complete as per direction of the Engineer-in-charge.
Wall painting two coats with weather coat of approved shade on new work to give an even shade including cost of paint, labour , T & P etc complete as per direction of Engineer-in-charge.
Supplying, Cutting , straightening, coiled or bent up M.S Rod or Tor steel bending, binding welding and joinging if necessary and tying the grills and placing in position as required for RCC work and providing fan hooks hoisting lowering and including cost, conveyance of M.S rods or tor steel and binding wire of 18 to 20 gause required for the work for bending, binding and tying the grills (payment will be made on weight of M.S Rod or Tor steel only and no separate payment will be made towards the weight of binding wire) etc. complete as directed by the Engineer-in-charge.
Providing, fitting and fixing of MS grills, doors, windows, shutters & staircase hand rails of different size as per the approved design including cost of all materials, labour and conveyance etc. complete as per the direction of the Engineer-in-charge.
Painting two coats with enamel paint over a coat of red oxide primer to give an even shade including cost of primer, paint & labour , T & P etc required for the work complete as per the direction of the Engineer-in- charge.
Supplying, fixing vetrified tilels in floors, treads or steps & landings on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing, cost of tiles etc complete as per direction of the Engineer-in- charge.
Supplying, fixing vetrified tiles in dados, skirting & risers of steps on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing & polishing etc. complete including cost of vetrified tiles as per direction of the Engineer-in- charge.
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade ofsize 32mm x 32mm x 2mm @ 0.90mtr. C/Cand stainless square pipe bracing of size32mm x 32mm x 2mm in 3 rows in staircase as per approved design andspecification, buffing, polishing etc with cost,conveyance of all materials, labour,T&P etc. required forthecomplete in all respect.
Providing and fixing in position 50mm, thick precast cement concere jally (1:2:4) hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., required for the complete in all respect
Fixing Porcelin Indian type W.C. (Orissa Pan) duly embedded in cement concrete ( 1:4:8) using hard granite metal 4 cm nominal size all complete etc as per specification and direction of the Engineer-in-charge.
Fixing 110mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification and direction of the Engineer-in-charge.
Fixing of porcelain European type WC Pan with P trap to the floor with wooden plug & cromium plated screws including jointing the trap with soil pipe in Cement (1:1) etc all Complete as per specification and direction of the Engineer-in-charge.
Providing and fixing P.V.C low level flushing cistern with manually controlled device(handle lever) conforming to IS :7231, with all fitting and fixtures all complete as per specification and direction of the Engineer-in-charge.
Providing and fixing on wall face 110 mm OD P.V.C. SWR S/S Pipe (ISI type-A) Rigd PVC soil waste and
rain water pipes including jointing with seal ring confirming to IS 5382 leaving 10 mm gap thermal expansion,(i) Single socketed pipes, etc complete and as per the direction of Engineer-in-charge.
Providing and fixing on wall face 110mm dia P.V.C. SWR S/J with door for rigid PVC rain water pipes Type A including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete and as per the direction of Engineer-in-charge.
Providing and fixing on wall face 110 x 110 x 110mm dia PVC SWR Tee for rigid PVC rain water pipes Type A including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete and as per the direction of Engineer-in-charge
Providing and fixing on wall face 110mm dia P.V.C. SWR door bend 87.5' for rigid PVC rain water pipes Type A including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete and as per the direction of Engineer-in-charge.
Providing and fixing on wall face 110 mm dia P.V.C. SWR plain bend 87.5 for rigid PVC rain water pipes Type A including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete and as per the direction of Engineer-in-charge.
Providing and Fixing Wash basin with holes for pillar tap conforming to IS: 2556 : Part 4-2004 with cast iron or M.S brackets painting with white paint including cutting holes in wall and making good the damagess etc. and as per specification and direction of the Engineer-in-Charge.
Providing and Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings as per specification and direction of the Engineer-in-Charge.
Providing and Fixing standard sized chromium plated brass towel rail complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws complete as per specification and direction of the Engineer-in-Charge.
Fixing a CP soap holder cromimum plated brass lid and brackets fixed to wooden plugs with chromium plate brass screws or cromium plated brass soap dish complete with chromium plate brass screws as specification and direction of Engineer-in- Charge.
Providing and Fixing 600 x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws an washers complete as per specification and direction of Engineer-in- Charge.
Providing and Fixing standard sized glass-shelf with chromium plated brass brackets and guard rails complete, fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-in-charge
Providing and Fixing 15 mm dia PVC inlet connection pipe and making connection with pillarcocks and supplay main for wash basin complete as per specification and direction of Engineer-in- Charge.
Providing and Fixing 32mmx 1150mm long PVC waste pip for wash bsin or sink including brass check nut complete as per the direction of the Engineer-in-charge.
Providing and Providing and Fixing C.P. waste. (32mm -5") long for wash basin as per specification and direction of the Engineer-in- Charge.
Providing and Fixing C.P. Sink waste. (80/32) for sink as per specification and direction of the Engineer-in- Charge.
Providing and Fixing pillar taps 15mm dia C.P swan neck Pillar cock with spout long screws, shanks and back nuts of nominal bore as per specification and direction of the Engineer-in- Charge.
Providing and Fixing of 15mm dia cp brass long body bib cock conformg to IS: 781-1995 of nominal size as per specification complete and direction of the Engineer-in- Charge.
Providing and Fixing of 15mm dia cp brass short body bib cock conformg to IS: 781-1995 of nominal size as per specification complete and direction of the Engineer-in- Charge.
Providing and Fixing of 15 mm CP 2 in 1 Bib cock . polish bright conformg ti is: 781-1995 of nominal size as per specification complete.
Providing and Fixing 15 mm dia CP brass Angle stop cock conforming tio IS 781-1995 of nominal size as per specification complete and direction of the Engineer-in- Charge.
Providing and Fixing 15mm dia C.P concealed stop cock conforming tio IS 781-1995 of nominal size as per specification complete and direction of the Engineer-in- Charge.
Providing and Fixing C.P.revolving shower (bend type) with 15mm or 20mm inlet including polishing all complete as per specification and direction of the Engineer-in- Charge.
Providing and fixing Stainless Steel A ISI 304 24"x 18"x 10" STEEL sink single bowl(Ordinary ) as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per the Ph specification and direction of the Engineer-in-charge.
Providing and fixing to wall or ceilling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fitting of 15mm nominal bore with clamps including making good the wall, ceilling and floor all complete as per specification and direction of the Engineer-in-charge.
Providing and fixing to wall or ceilling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fitting of 25mm nominal bore with clamps including making good the wall, ceilling and floor all complete as per specification and direction of the Engineer-in-charge.
Cutting holes of size 12cmX12cmX25cm through existing brick work including making good the same in cement mortar (1:4) for taking G.I. Pipe fittings/PVC pipes & fittings etc. all complete as per the P.H. specification and direction of the Engineer-in-Charge.
Cutting grooves in pucca floors and walls for taking G.I./PVC pipes and making good the damages as per the direction of the Engineer-in-Charge.
Providing and laying in trenches PVC pipes conforming to ASTM-D-1785/89 (Schedule-80) of the 32mm nominal bore and Pipe fittings including Testing as per specification and direction of the Engineer-in-Charge.( Earth work eaxcavan in trenches to be measured and paid separatly).
Laying in trenches unplasticised PVC pipes conforming to IS: 4985/2000 and specials of the 110mm outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete ( Earth work excavation in trenches to be measured and paid separatly).
Providing and Fixing Rotational moulded polyethylene 1000 litre capacity Double Layer cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of Engineer In Charge.
Providing and Fixing Rotational moulded polyethylene 2000 litre capacity Double Layer cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of Engineer In Charge.
Providing and Fixing of Gun Metal Check or Non-return Valve Class - I conforming to IS : 5312 (Part-I) -2004 of the 32mm nominal bore as per specification complete and direction of the Engineer In Charge.
110mm dia P.V.C. Nahani Trap with out Jally.
CP Health Foucet with 1.0 1 RM PVC Tube.
110 mm dia P.V.C. SWR Vent Cowl.
110 mm diaP.V.C. SWR.pipe clip.
125mm dia Round Grating Doom with waste Hole.
Fixing of UPVC BALL VALVE Sch-80 (Solvent
Welded with Metal Ball) 32mm as per specification complete and direction of the Engineer In Charge.
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Recessed wiring to light point/fan point/ exhaust fan point/ callbell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard )(Short point)
Recessed wiring to light point/fan point/ exhaust fan point/ callbell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard )(Medium point)
Recessed wiring to light point/fan point/ exhaust fan point/ callbell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard )(Long point)
Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required.
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 100 mm deep (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing of 16 / 18 SWG metal box of 150 mm x 150 mm x 60 mm deep (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
Supply and fixing of 5pin 15 / 16 amp socket outlet on the existing switch box/cover including connection etc required.
Supply and fixing of 15 / 16 amp piano type switch on the existing switch box/cover including connection etc required.
Supply and fixing of 3pin 5 / 6 amp socket outlet on the existing switch box/cover including connection etc required.
Supply and fixing of 5 / 6 amp piano type switch on the existing switch box/cover including connection etc required.
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required
Supplying , fitting ,fixing, testing and commissioning of 9watt LED bulb.
Supplying , fitting ,fixing, testing and commissioning of 50watt LED street light
Supply of A.C Ceiling fan of size 48" without regulator.
Installation, Testing and Commissioning of ceiling fan including wiring the down rod of standard length (up to 30cm) with 1.5 sq.mm FR PVC insultated single core multistrand copper conductor etc, as required.
Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.
Supply and fixing, installation, testing and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK
Supply and fixing of 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.
Supply of 12" Exhaust fan heavy duty .
Installation, Testing and Commissioning of exhaust fan up to 450 mm sweep in the existing opening including makeing the holes to suit the size of the above fan, makes good the damage complete,connection,etc. as required.
stage.html
html • 0.13 MB
techsummary_566687.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.36 MB
TSSchool1.pdf
Tender Documents • 1.37 MB
BOQ_566687.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid