MAINT OF INTERNAL ELECTRIFICATION IN MD OTM ACCN AT CERTAIN BUILDING OF ENTIRE AREA OF CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch A ) Internal Electric works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc complete all as specified and directed.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) with all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size (FRLS) multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 2 above but one light point controlled by two way switch complete all as specified and directed.

All as per item No 2 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and directed.

All as per item No 2 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete all as specified and directed.

All as per item No 2 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size multi stranded copper wire for one 6 pin socket outlet, 15/16 Amp on independent board complete all as specified and directed.

Supply & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into existing conduit and terminal boxes and matching the existing surface mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated Bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size (FRLS) multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 7 above but one light point controlled by two way switch complete all as specified and directed

All as per item No 7 above but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and directed

All as per item No 7 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete all as specified and directed

All as per item No. 7 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size multi stranded copper wire (FRLS) for one 6 pin socket outlet, 15/16 Amp on independent board complete all as specified and directed

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick/PCC block masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size (FRLS) multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engineer in charge )

All as per item No 12 above but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and directed

All as per item No 12 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete all as specified and directed.

All as per item No. 12 above but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size (FRLS) copper wire for one 6 pin socket outlet, 15/16 Amp on independent board complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one-way 5/6Amp complete all as specified and directed.

Supply and fixing of switch piano flush type single pole Two way 5/6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply and fixing of socket outlet 2-in-1, 3 pin 5/6 and 15/16 Amp flush type, complete all as specified and directed.

Supply and fixing of ceiling rose, PVC / polycarbonate isolated body three terminal complete all as specified and directed.

Supply and fixing of lamp holder angle type, PVC / polycarbonate type insulated body with back plate suitable for batten / wall fittings complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole complete all as specified and directed.

Supply and fixing of bell push, piano flush type, single pole 5 amps complete all as specified and directed.

Supply and fix High quility LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning including taking down complete all as specified and directed.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of Double pole( DP) and current carrying capacity 16 to 32 AMP, in the MCB DB complete with connection testing and commissioning including taking down complete all as specified and directed.

Supply & Fixing in repair 415 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of 4 pole and current carrying capacity 40 TO 100AMP, in the MCB DB complete with connection testing and commissioning including taking down complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Taking out old unserviceable Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 4 Sqmm size cables, PVC insulated stranded copper conductor fixed in and including PVC conduite pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC as earth wire in green colour including chase cutting on brick/PCC block /stone masonry for fixing conduit and making good the disturbed surfaces of wall as per existing. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Taking out old unserviceable Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in and including PVC conduite pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC as earth wire in green colour including chase cutting on brick/PCC block /stone masonry for fixing conduit and making good the disturbed surfaces of wall as per existing. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 10 Sqmm size cables, PVC insulated stranded copper conductor fixed in and including PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC as earth wire in green colour including chase cutting on brick/PCC block /stone masonry for fixing conduit and making good the disturbed surfaces of wall as per existing. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Taking out old unserviceable service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated multi stranded aluminium conductor, 10 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart with and including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Taking out old unserviceable service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated multi stranded aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart with and including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 on ser page No 497 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost to Govt by the contractor.

Supply & Fixing high quality LED lighting fixture mirror type with high output diffuser 2 feet 1x10 watt 220V AC, complete with polycarbonate tube, white/ warm white suitable for mirror light internall prewired of 1.5 sqmm three core flexible cable complete all as specified and directed.

Supply and fix high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuild driver) complete all as specified and directed.

S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed.

Supply and fix in replacement High quility LED T8 tube rod 20 Watt (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fix in repair modular type switch single pole, one way 6 Amp complete all as specified and directed.

Supply and fix in repair socket out let multi 5 pin, 6 Amps, Modular type complete all as specified and directed.

Supply and fix in repair switch modular type single pole, one way 16 Amp complete all as specified and directed.

Supply and fix in repair socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix in repair socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply and fix in repair socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S & F in repairs Plug top 3 pin 15 amp, complete all as specified and directed

S & F Recess mounting LED 300x300 mm luminaire,18 W, 230V, suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F Recess mounting LED luminaire 600mm x 600 mm, 36 W, 220V, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F in replacement bldg security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

S & F LED post top lantern suitable for 30W gate lights with diffuser and made in fully cast aluminium body finished with polyurethane paint with acrylic window cover complete with all accessories and base plate including PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make : Mepro Cat part No PTLD-0003 or equivalent make in Philips/Bajaj/Havells

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including LED light driver holder connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

S&F wall bracket type, 09 watt LED decorative fixture made up of polycarbonate base B-22 including LED Lamp of Make Havells Cat part No: LHDL06160099 or equivalent make in Bajaj/c&s/Philips complete all as specified and directed.

S&F bed side LED light fitting , 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

S&F recess mounted LED downlighter aluminium heat sink type, 09 watt with PC diffuser in white powder coated finish with integrated driver of Make Havells/Bajaj/c&s complete all as specified and directed.

S & F in repair Surface suspended LED Circular luminaire,25 W, 230v, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre-wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH or any equivalent

S & F LED bollard fitting suitable for 12 Watt LED bulb with B-22 porcelain holder with cover fully cast aluminium body finished with polyurethane paint (with prior treatment) & including all fittings (Total length of fitting 1085 mm) and LED warm white bulb 12 Watt as per Cat Part No MBL-S-195 of make Mepro electrical or equivalent of other make as approved by GE, complete with all accessories and including PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

Taking out old unserviceable Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 2.5 Sqmm size cables, PVC insulated stranded copper conductor fixed in and including PVC conduite pipe 25mm dia with all accessories and one continuous run of 2.5 Sqmm copper conductor PVC as earth wire in green colour including chase cutting on brick/PCC block /stone masonry for fixing conduit and making good the disturbed surfaces of wall as per existing. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S&F in repair prepaid meter counter interface unit with inbuild load control switch (display unit) as per existing make secure and model complete all as specified and directed

S&F in repair 6 core control cable to connect meter to parallel Home display split unit for remote access of data/operation including two cable end connectors(RJ-11), punching complete all as specified and directed.

S&F in repair recessed on wall, meter box fabricated from 1.2mm CRCA sheet of as per existing adequate size of secure meter, nominal for single phase meter 01 No, foamed in PU gasket, hinged door, cable gland plate 2mm thick provided at bottom, cam locking arrangement complete all as specified and directed.

S & F in replacement LED Flood light luminaires of 120 watt 230 V AC with IP 66 outdoor type with thermal management in multiple optics with impact and corrosion resistant complete with driver and lamp and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. Make Bajaj/Crompton/Philips

M/S ABHI ASSOCIATES

M/S BHATT ENTERPRISES

aditya construction

M/S NAYAL ELECTRICALS

KRISHNA SAI ENTERPRISES

Builders Harpal

M/S Gagan Khosla

M/S CHAUHAN ELECTRIC WORKS