Construction of Accommodation and Toilet block for Girls Sports Hostel at Govt. Senior Secondary School Sarkaghat Distt. Mandi (HP

Amount

Excavation in foundations, trenches etcetera in all classification of soil dry in or saturated conditions upto any depth and lift includung pumping and bailing out water where required including stacking the serviceable and unserviceable materials seperately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcectra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in- Charge including carriage of materials in all leads and lifts disposed materials to be neatly levelled.

Providing and laying cement concrete 1:4:8 (One cement: four sand: eight graded crushed stone aggregate) 40mm (Forty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Stone filling tightly dry hand packed under floor as per specification or as per directed by the Engineer-In Charge with in all leads,lifts and other incidentals.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joint in with cement mortar 1:6 (one cement and six sand)within all leads, lifts and other incidental charges complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) upto all floor level including curing complete and carriage of material within all leads, lifts and other incidentals.

Providing and laying cement concrete 1:5:10 (One cement : Five sand : Ten graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred ) dia PVC pipe extending through the full width of the structure with slope of 1 vertical : 20 horizontal towards drawing face complete as per drawing and technical specification clause 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage.

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint In gratings framed guard bars ladders, railings, brackets and similar works including carriage of materials within all leads and lifts complete in all respect.

Supplying and fixing bar-bed wire (IS:278-1962 Type-1) weighing 9.38 kg. (nine point three eight kilogram) per 100 (hundred) metre (minimum) straining and fixing to any type of standrad rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or steel pins etcetra as directed (posts and struts of wood, concrete, steel etcetra and straining bolts shall be paid extra) including carriage of material with in all leads, lifts and other incidentals complete in all respect.

White washing with lime on undecorated wall surface (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Flat surfaces such as soffits of the suspended floors roofs, landing,shelves and the like etcetra in all thickness in any floor level.

Beams, cantilever, girder and lintel, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in any depth in all heights from floor.

Edge of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 (one cement :one and half sand : Three graded/crushed , crushed stone aggregate 20mm (twenty millimeter) nominal size) mechanically mixed , vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect.

Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in upto floor two level including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing standered steel section of mild steel angle and flat iron iron door,window,clerestory window frame manufactured from mild steel angle iron section of 40X40X4mm (forty into forty into four millimetre,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X4 mm (fortyy into four millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge.

Providing Sal wood.work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge..

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 35 mm thick including black enamelled M.S. butt hinges as per the direction of Engineer-in- Charge....

Providing and fixing 40 mm thick panelled glazed or panelled and glazedshutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 2nd class deodar wood including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete with in all leads and lifts as per the direction of Engineer-in- Charge. .

300x16 mm (three hundred mili metre in to sixteen milimetre)

250x16 mm (two hundred fifty into sixteen milimetre)

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

125 mm (one hundred twenty five milimetre) size

100 mm (one hundred millimetre) size

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etcetra complete.

300x10 mm (three hundred milimetre into ten milimetre)

200x10 mm (two hundred milimetre into ten milimetre)

Providing and fixing 250 mm (two hundred fifty mili metre) oxidized M.S. hooks and eyes

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 Eighty five) G. with wire of dia 0.56 mm (Zero point five six milli metre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 2nd class deodar wood including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. ..

6 mm (six milimetre) cement plsaster to ceilling/sloping surfacein cement mortar 1:3(one cement three sand)in all floor level including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

15mm (fifteen milimetre) Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not ceeding 80mm in girth and finished even and smooth including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. .

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) (three hundredinto three hundred milimetreinto ten milimetre)in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm ( twelve milimetre )thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying Duro stone vetrified tiles 300x300mmx8mm ( three hundred into three hundred into eight milimetre ) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (twelve milimetre) thick cement mortar1:3 (one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials with in all leads and lifts and other incidentals.

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poliyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to black coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) with prepainted G.I limpet and bitumen washers complete with all accesories as required as per direction of Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of olyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing 0.63 mm (zero point sixty three millimetre) G.I sheet 15 cm ( fifteen centimetre). wide 45 cm. (forty five centimetre) overall semi circular plain G.I. sheet gutter with iron brackets 40x3mm ( forty into three millimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Providing and fixing 100 mm ( hundred millimetre ) dia on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm ( four point five kilogramme per sqm metre) including filling the joints with approved adhesive complete.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete

PVC plain bend 150 mm ( one hundred fifty milli metre) dia

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials within all leads and lifts complete in all respect.

Provding under layer for plinth protection of 75mm (Seventy five millimeters) thick(unconsolidated )bed dry brick/aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Provding plinth protection 50mm (Fifty millimeters) thick in cement concrete 1:3:6(One cement:three sand:Six graded/crushed stone aggregate)20mm(Twenty millimeters) nominal size including finishing the top surface complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) thick cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard drawing/design including carriage of material within all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making goodthe wall, ceiling and floor.complete.

15 mm (fifteen millimetre nominal size)

20 mm (twenty millimetre nominal size)

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately)

Providing and fixing to wall ceiling and floorvitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon,15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers solid type white plastic seat.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holes and making good the same but excluding fittings flat back 500 mm x 400 mm (five hundred millimetre in to four hundred millimetre)

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the eception of pipes and fittings .

Providing and fixing C.P. Brass waste for wash basin or sink 32 mm (thirty two millimetre)dia

Providing and fixing M.I. Union for wash basin or sink 32 mm (thirty two millimetre) dia

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr (one point five metre) tube

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P.Brass screws and washers complete.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 750x20 mm (seven hundred fifty into twenty millimetre)

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws

Providing and fixing CP Brass bib tap with capston head 15 mm (fifteen millimetre) dia

Providing and fixing CP Brass pillar tap with capston head 15 mm (fifteen millimetre) dia

Providing and fixing tooth brish holder (vitreous China)

Providing and fixing P.V.C connection with brass unions 300/450mm (three hundred oblique four hundred millimetre )length 15 millimetre(fifteen millimetre) nominal bore complete.

Providing and fixing brass full way valve with wheel 15 mm (fifteen millimetre) nominal bore

15 mm (fifteen millimetre) nominal bore

20 mm (twenty millimetre) nominal bore

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.

Providing and fixing PVC water storage tank of 1000 litter (one thousand litter) ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to alln heights above ground level

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.

75 mm (seventy five millimetre) dia

110 mm (one hundred ten millimetre)dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.

110 mm (one hundred ten millimetre)dia

75 mm (seventy five millimetre) dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc.

110 mm (one hundred ten millimetre)dia

75 mm (seventy five millimetre) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete.

110 mm (one hundred ten millimetre)dia

75 mm (seventy five millimetre) dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.

110 mm (one hundred ten millimetre)dia

75 mm (seventy five millimetre) dia

Providing and fixing toilet paper holder CP brass

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110x75 mm (one hundred ten into seventy five millimetre).

Construction of main hole with RCC top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth completeInside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3

Construction of main hole with RCC top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth completeInside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement and three sand)

AJAY KUMAR

Naresh Thakur