Work of Renovation Kaptanganj inspection house and Jilhadaari First office in Azamgarh district.

Amount

Dismantling of old existing plaster including disposal of refuse within distance of 60 meter including all labour, T&P etc.

Dismantling of Reinforcement cement concrete (RCC & RBC) including including all labour, T&P etc.

Dismantling of cement concrete or brick work including all labour, T&P etc.

Dismantling doors, window and Ventilator including chaukhat with hold fast including stacking of materials.

Earthwork in foundation including digging and refilling the trenches with its proper disposal within 30 meters lead.including all labours & T&P.etc.

Centering and shuttering for C.C. work including all cost of materials,T&P and labours etc. finished.

Laying C.C. 1:3:6 with cement, coarse sand and stone bllast including all cost of materials,T&P and labours etc.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster including cost of material T&P and labours..

Centering and shuttering for R.C.C. work including all cost of materials,T&P and labours etc. finished.

Reinforced Cement Concrete 1:1.5:3 (Cement, coarse Sand and dalla grit) in column and plinth beam including all cost of materials,T&P and labours etc.finished including cost of steel complete.

S&F of TMT steel of Fe 500 in plain work such as reinforcement concrete or Reinforcement brick work (when not included in an over all rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks.

First class brick work in 1:4 cement mortar including all cost of materials,T&P and labours etc.

12 mm thick Plastering in 1:4 cement mortar including all cost of materials,T&P and labours etc.

Plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.complete work including all cost of material ,T&P and labours.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including grouting the joints with white cement and matching pigments etc. complete for size of Tile 60 X 60 Cm.

Laying of 25mm thick kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the sgade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work

Supply and fixing 6mm thick CHINA white glazed Tiles (ceramic tiles) in flooring/skirting or dado with 1:3 Cement mortar in kitchen and toilet including coarse sand working and the joints finishing with white cement slurry including all materials,labours tools etc. complete of work

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepared the surface even and smooth complete

Providing & Applying of two coat of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour with two coat

Providing & Applying of two coat of Wall painting with acrylic emulsion paint of exterior grade,approved brand and manufacture to give an even shade with two or more coat

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. Thehinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction ofEngineer- in-charge. Extruded section profile size 48x40 mm

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and railsmitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.The styles ofthe shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambe red single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) complete work including labour ,T&P etc.

Providing and fixing aluminiumhandles, ISI marked, anodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less thangrade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868 ) transparent or dyed to requiredcolour orshade,withnecessary screwsetc.complete : 100x10 mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding.

Supply and fixing of decorative 32 MM thick flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be measured sepratly.

Providing and fixing 18 mm thick gang sawcut,mirror polished,premoulded and prepolished,machine cut for kitchen platforms,vanity counters,windowsills, facias and similar locations of required size,approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finishetc. complete at all levels.Area of slab over 0.50 sqm

Supplying and fixing 5 mm thick glass panes in window etc.

Supply and fixing galvanized mosquito heavy quality iron wire gauge of expanded metal heavy quality our windows and including C.P. teak wood battens 3cmX10cm with servers and including supply of all in materials, labour and tools and plants etc. required for proper completion of work

Providing and laying "Brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other , over 20mm thick base of cemet mortor 1:4 cemet and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortor mixed with water proofing compoud in 1:4 cement and coarse sand mortor finished smooth and top mashed false square 30cm x 30cm and side wall parapet shall be mono tythic plaster wall upto 30cm height and junction and corner shall be rounded by bbrick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & includig S/o all material , labour T & P etc. copmlete for proper completion of work.

Earth work in Filling in plinth including watering , dressing etc.taken from private land with full compaction complete.

Sand filling in plinth including supply of necessary quantity of sand and including watering , dressing etc.

Supplying and fixing of steel gate size 12 X 6 feet of I.H. Campus for Steel work welded in built up sections/ framed work, including cutting, hoisting, In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Interlocking tiles -Rubber moulded reflective zig-zag 80 mm providing and laying of interlocking concrete block pavernents having thickness 80 mm as per drawing and technical specification clause 1504

Providing and laying of M-150 brick ballast 40 mm gauge

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling juction off wll and floor along the external perimer of building expansion joints surroundings of pipes and condut etc. complete Plinth area of the building at ground floor only shall be measured as per I.S.6313(Part II 1981) aldrine emulsifible concentrate or any other approved material such as Hepthachlor or chlordance will be used the rat of applications of chemical emulsion shall be as follows

Providing and injecting for post constructional antitermite treatment

Electrification work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providng andfixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 Amodular switch, connections etc. as required. (For light plugs tobe used in non residential buildings)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc.as required. 8 Module (125mmX125mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc.as required. 6 Module (200mmX75mm)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 8 way , Double door

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 12 way , Double door

Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required (AC point)

Wiring for circuit/ submain wiring along with earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (DB to Power)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (DB to AC)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 16 sq. mm + 1 X 6 sq. mm earth wire (Panel to Power DB)

Wiring for circuit/ submain wiring along with earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire (Panel to Light DB)

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.40 A

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.63 A

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking rrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, opper winding,PowerFactor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%,remoteor electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc .complete as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, completeas required.

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. As required.

Supplying installation & Commissioning of off grid Solar power plant capacity 5kw including all T&P etc Battery complete of approved make and specification of UPNEDA

External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc .

TV & Telephone LAN Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular witches in recess etc.as required. 1 or 2 Module (75mmX75mm) BOX

Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.Bell push

Supplying and drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/recessed steel/ PVC conduit asrequired.2 Pair (Telephone wire)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (TV wire)

Water supply, Sanitary and Sewerage work P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. (External work) (a) 40mm dia

(b) 25mm dia

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete.(Internal work) (a) 15 mm dia

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (15mm dia)

P/F C.P. brass angle valve for cistern , wash basin, Gyeser etc 15mm nominal hole size including cost of all materials, labour T&P etc. of approved brand and quality by EE

P/F 15mm nominal hole size C.P. stop cocks of approved brand and quality by EE

Fixing 15mm PVC connection, heavy quality with brass Union including supply of all materials, labour T&P etc. required for proper completion of the work.

P/F in position C.P. brass towel rail complete with brackets including gchases in wall and repairing the same in 1:3 CM complete.of approved brand and quality by EE

Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. Brassscrews.of approved brand and quality by EE

P/F C.P. Brass toilet paper holders including cost of all materials, labours T&P etc.of approved brand and quality by EE

P/F C.P. Jali for Nahani Trap 100mm dia including cost of all materialsof approved brand and quality by EE

P/F C.P. Brass waste pipe for sink and washbasin in 32mm dia complete, cost of all materials, labour T&P etc.of approved brand and quality by EE

P/F wash basin with single hole/ number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole & making good the same but excluding fittings ( 630 X 450cm.) of approved brand and quality by EE

P/F stainless steel kitchen sink with C.I.bracket excluding cost of other fitting. (Kitchen sink without drain borad size (610 X 510 X 200mm) of approved brand and quality by EE.

P/F 15mm nominal hole size C.P. brass pillar cocks.of approved brand and quality by EE

P/F chromium plated shower rose with 15mm as 20mm inlet complete and 100mm dia of approved brand and quality by EE.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete of approved brand and quality by EE.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. of approved brand and quality by EE.

Providing & Fixing water closet Squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 ltr low level white PVC flusing cistern with manually contrilled device (handle lever) confermng to IS : 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vetreous china orrisa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.of approved brand and quality by EE.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern& C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :of approved brand and quality by EE.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (110 mm diameter) of approved brand and quality by EE.

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.of approved brand and quality by EE. (a) 110 mm bend

(b) 110 mm SHOE

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.of approved brand and quality by EE.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal iameter,totalweight of cover and frame to be not lessthan 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP-1 complete withC.I. grating brick masonry hamber with water tight C.I. cover with frame of300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With common burnt clayF.P.S.(nonmodular) bricks of class designation 7.5

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes (100 mm dia pipe)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing, Laying and fixing inj position salt glazes S.W. full round pipe , IS:651 (grade-A) with 1:2 cm with spun yarn or gasket laid under ground over 15cm C.C. 1:4:8 and in cased in proper gradient including excavation of trenches up to 2m depth (150mm dia)

Proving and Fixing of 40mm gun metal Gate valve with C.I. wheel of approved quality

Proving and Fixing of 20mm dia ball valve (Brass) of approved quality, high or low pressure with plastic floats.

Constructing Septic tank (20 User Size 2.30X1.10X1.80) with brick work in cement mortar 1:4 (1 cement and 4 coarse sand), cement concrete 1:2:4 (1cement, 2 coarse sand, 4 graded stone aggregate 20 mm. nominal size ) in foundations/base, baffle walls in half brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size ) 12 mm. thick cement plaster 1:3 (1 cement, 3 Coarse sand ) inside finished with a floating coat of neat cement. The rate includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering, shuttring etc. complete with required Nos heavy duty SFRC type MH/IC covers and frames, vent pipe and all other assessories as directed at site by the Engineer in Charge.

Making soak pit 2.5 m. diameter and 3 m. deep with 45 x 45 cm dry brick honey comb shaft with F.P.S bricks and SW drain pipe complete as directed at site by the Engineer in Charge.

P/F cost iron floor trap self cleaning design with sand cost iron screwed down as hinged grating with or without vent arm complete including cost of cutting and making good the walls & floors.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868 ) transparent or dyed to required colour or shade,with necessary screw setc.complete : 200x10 mm of approved make & model by EE.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less thangrade AC 10 as per IS : 1868), transparent or dyed torequired colour or shade, with nuts and screws etc.complete : 300x16 mm of approved make & model by EE.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :150 x 10 mm of approved make & model by EE

Providing and fixing , I.S.I. marked Aluminium door stopper with necessary screws etc. complete : of approved make & model by EE.

Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (Part B) in factory made frames of doors, windows, clerestory, windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :75x50x2.50 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 75 mm

ALOK KUMAR SINGH

BALENDRA SINGH