ERECTION/INSTALLATION OF ODC/OWC INCLUDING MULTIMODALTRANSPORTATION FROM HALDIA PORT/KOLKATTA PORT TO NRL SITE

Transport Engineering and design of Bridge Jumper/Structural at Kaliyani River Crossing(refer scope of work Part-A)

Design the most suitable SPMT configuration for transportation of the aforementioned study subjects, based on the inputs from route survey and design the most suitable SPMT configuration for each type of cargo. Once the design is identified, create transport drawing of the ODC/OWC This design will, at minimum, achieve the axle-load below 15Te/axle due to the road condition.Design the bridge jumper/Structural arrangement for an approximate 75mtr-wide Kaliyani River (bidder to survey at site for the actual width) .This is the only major river crossing of this route. Specify the requirement of the piers for bridge jumper. prepare and submit bridge drawing for bridge jumper/structural girder over across Kaliyani River. Provide a drawing including loads on each piers, nos. of piers, spacing of Piers, size of piers and other technical inputs required for further design and construction of civil structure / piers for supporting the bridge jumper/structural members. Submission of GA drawing of the bridge jumper/Structural configuration. Nos. of piers shall be minimum as far as possible in view of probable river water flow obstruction during monsoon. Effort shall be to design with two piers. In any case number of piers shall not exceed 03 excluding two abutments. (Construction of Approach road on the both sides of the rivers shall be in the scope of NRL)

Jetty development works (refer scope of work Part-A)

Jetty modification, New basuin/new jetty construction (if required), modification/construction of facilities required at jetty for performing Ro-Ro- operation,other peripherial job in jetty other than hard stand and approach road .

Supply, Erection & dismantling of Bridges

Erection & dismantling of Bridge jumper /structure including supply of bridge jumper/structural member, girder.( refer scope work Part-A)

Re-Erection and dismantling of Bridges

Subsequent erection & dismantling of Bridge jumper /structures ( refer scope work Part-A)

Taking delivery of ODC/OWC on the river barges from supplier's vessel hook at Haldia Port / Kolkata port , Marine transportation/ water ways transportation, NRL Jetty RO-RO operation, Temporary storage, road transportation , transport inside refinery till erection location at respective NREP units(refer scope of work Part-A)

1P31-CC-0126 : RPTU HP H2S Absorber 25M (L) x 3.2M (D) x 430MT (Weight)

1P30-RB-2221: RPTU EB Reactor 43.0M (L) x 4.76M (D) x 970MT (Weight) . Additional packets of Reactor Internal and Spares Net Weight :100 MT

1P30-RB-2222: RPTU EB Reactor 43.0M (L) x 4.75M (D) x 950MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :100MT

1P31-RB-2821 :RPTU VGO HDT 27M (L) x 4.5M (D) x 580MT (Weight) Additional Packets of Reactor Internal and spares Net Weight :50MT

1P30-VV-2631 :RPTU -LCF HP/HT SEPARATOR 14.5M (L) x 4.5M (D) x 220MT (Weight)

1P30-CC-0126 – RPTU VACUUM TOWER 53.0M(L) x 8.5M(D) x 350 MT (Weight)

1P26-RB-2521:DHT REACTOR 30M (L) x 5.6M (D) x 430MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :45MT

1P25-CC-3127 :PFCC C3 splitter 97.0M (L) x 5.8M (D) x 780MT (Weight)

1P25-CC-3128:PFCC C3 splitter 91.0M (L) x 5.8M (D) x 780MT (Weight)

PFCC Main Fractionator 60M (L) x 8.0M (D) x 421MT (Weight)

1P24-CC-0926:MSP ISOM Deisohexanizer 72M (L) x 6.0 M (D) x 430 MT (Weight) + 7.5 meter(D) Skirt

1P21-CC-0412: CDU Column 60M (L) x 5.6M (D) x 400MT (Weight)+ 10 meter Skirt

1P21-CC-3511 :VDU Column 49M (L) x 10.3M (D) x 550MT (Weight)

Description of Work / Item(s)

Equipment lifting/erection and alignment

1P31-CC-0126 : RPTU HP H2S Absorber 25M (L) x 3.2M (D) x 430MT (Weight)

1P30-RB-2221: RPTU EB Reactor 43.0M (L) x 4.76M (D) x 970MT (Weight)

1P30-RB-2222: RPTU EB Reactor 43.0M (L) x 4.75M (D) x 950MT (Weight)

1P31-RB-2821 :RPTU VGO HDT 27M (L) x 4.5M (D) x 580MT (Weight)

1P30-CC-0126 – RPTU VACUUM TOWER 53.0M(L) x 8.5M(D) x 350 MT (Weight)

1P26-RB-2521:DHT REACTOR 30M (L) x 5.6M (D) x 430MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :45MT

1P25-CC-3127 :PFCC C3 splitter 97.0M (L) x 5.8M (D) x 780MT (Weight)

1P25-CC-3128:PFCC C3 splitter 91.0M (L) x 5.8M (D) x 780MT (Weight)

PFCC Main Fractionator 60M (L) x 8.0M (D) x 421MT (Weight)

1P24-CC-0926:MSP ISOM Deisohexanizer 72M (L) x 6.0 M (D) x 430 MT (Weight) + 7.5 meter(D) Skirt

1P21-CC-0412: CDU Column 60M (L) x 5.6M (D) x 400MT (Weight)+ 10 meter Skirt

1P21-CC-3511 :VDU Column 49M (L) x 10.3M (D) x 550MT (Weight)

Erection of any equipment in the same set up of crane. Equipment weighing up to 50MT.

Erection of any equipment in the same set up of crane. Equipment weighing more than 50MT but less than 200MT.

Description of Work / Item(s)

Transport Engineering and design of Bridge Jumper/Structural at Kaliyani River Crossing(refer scope of work Part-A)

Design the most suitable SPMT configuration for transportation of the aforementioned study subjects, based on the inputs from route survey and design the most suitable SPMT configuration for each type of cargo. Once the design is identified, create transport drawing of the ODC/OWC This design will, at minimum, achieve the axle-load below 15Te/axle due to the road condition.Design the bridge jumper/Structural arrangement for an approximate 75mtr-wide Kaliyani River (bidder to survey at site for the actual width) .This is the only major river crossing of this route. Specify the requirement of the piers for bridge jumper. prepare and submit bridge drawing for bridge jumper/structural girder over across Kaliyani River. Provide a drawing including loads on each piers, nos. of piers, spacing of Piers, size of piers and other technical inputs required for further design and construction of civil structure / piers for supporting the bridge jumper/structural members. Submission of GA drawing of the bridge jumper/Structural configuration. Nos. of piers shall be minimum as far as possible in view of probable river water flow obstruction during monsoon. Effort shall be to design with two piers. In any case number of piers shall not exceed 03 excluding two abutments. (Construction of Approach road on the both sides of the rivers shall be in the scope of NRL)

Jetty development works (refer scope of work Part-A)

Jetty modification, New basuin/new jetty construction (if required), modification/construction of facilities required at jetty for performing Ro-Ro- operation,other peripherial job in jetty other than hard stand and approach road .

Supply, Erection & dismantling of Bridges

Erection & dismantling of Bridge jumper /structure including supply of bridge jumper/structural member, girder.( refer scope work Part-A)

Re-Erection and dismantling of Bridges

Subsequent erection & dismantling of Bridge jumper /structures ( refer scope work Part-A)

Taking delivery of ODC/OWC on the river barges from supplier's vessel hook at Haldia Port / Kolkata port , Marine transportation/ water ways transportation, NRL Jetty RO-RO operation, Temporary storage, road transportation , transport inside refinery till erection location at respective NREP units(refer scope of work Part-A)

1P31-CC-0126 : RPTU HP H2S Absorber 25M (L) x 3.2M (D) x 430MT (Weight)

1P30-RB-2221: RPTU EB Reactor 43.0M (L) x 4.76M (D) x 970MT (Weight) . Additional packets of Reactor Internal and Spares Net Weight :100 MT

1P30-RB-2222: RPTU EB Reactor 43.0M (L) x 4.75M (D) x 950MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :100MT

1P31-RB-2821 :RPTU VGO HDT 27M (L) x 4.5M (D) x 580MT (Weight) Additional Packets of Reactor Internal and spares Net Weight :50MT

1P30-VV-2631 :RPTU -LCF HP/HT SEPARATOR 14.5M (L) x 4.5M (D) x 220MT (Weight)

1P30-CC-0126 – RPTU VACUUM TOWER 53.0M(L) x 8.5M(D) x 350 MT (Weight)

1P26-RB-2521:DHT REACTOR 30M (L) x 5.6M (D) x 430MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :45MT

1P25-CC-3127 :PFCC C3 splitter 97.0M (L) x 5.8M (D) x 780MT (Weight)

1P25-CC-3128:PFCC C3 splitter 91.0M (L) x 5.8M (D) x 780MT (Weight)

PFCC Main Fractionator 60M (L) x 8.0M (D) x 421MT (Weight)

1P24-CC-0926:MSP ISOM Deisohexanizer 72M (L) x 6.0 M (D) x 430 MT (Weight) + 7.5 meter(D) Skirt

1P21-CC-0412: CDU Column 60M (L) x 5.6M (D) x 400MT (Weight)+ 10 meter Skirt

1P21-CC-3511 :VDU Column 49M (L) x 10.3M (D) x 550MT (Weight)

Equipment lifting/erection and alignment.

1P31-CC-0126 : RPTU HP H2S Absorber 25M (L) x 3.2M (D) x 430MT (Weight)

1P30-RB-2221: RPTU EB Reactor 43.0M (L) x 4.76M (D) x 970MT (Weight)

1P30-RB-2222: RPTU EB Reactor 43.0M (L) x 4.75M (D) x 950MT (Weight)

1P31-RB-2821 :RPTU VGO HDT 27M (L) x 4.5M (D) x 580MT (Weight)

1P30-CC-0126 – RPTU VACUUM TOWER 53.0M(L) x 8.5M(D) x 350 MT (Weight)

1P26-RB-2521:DHT REACTOR 30M (L) x 5.6M (D) x 430MT (Weight). Additional Packets of Reactor Internal and spares Net Weight :45MT

1P25-CC-3127 :PFCC C3 splitter 97.0M (L) x 5.8M (D) x 780MT (Weight)

1P25-CC-3128:PFCC C3 splitter 91.0M (L) x 5.8M (D) x 780MT (Weight)

PFCC Main Fractionator 60M (L) x 8.0M (D) x 421MT (Weight)

1P24-CC-0926:MSP ISOM Deisohexanizer 72M (L) x 6.0 M (D) x 430 MT (Weight) + 7.5 meter(D) Skirt

1P21-CC-0412: CDU Column 60M (L) x 5.6M (D) x 400MT (Weight)+ 10 meter Skirt

1P21-CC-3511 :VDU Column 49M (L) x 10.3M (D) x 550MT (Weight)

Erection of any equipment in the same set up of crane. Equipment weighing up to 50MT.

Erection of any equipment in the same set up of crane. Equipment weighing more than 50MT but less than 200MT.

Sarens Heavy Lift India Private Limited

ABC India Ltd

PRISM LOGISTICS PVT LTD

BOXCO LOGISTICS INFRATRANS PRIVATE LIMITED

Ardeshir B.Cursetjee and Sons Limited

Lift and Shift India Pvt Ltd

deugro Projects India Pvt Ltd

Tiong Woon Project and Contracting India Pvt Ltd

Ardeshir B.Cursetjee and Sons Limited

Bidder Name

deugro Projects India Pvt Ltd

Lift and Shift India Pvt Ltd

ABC India Ltd

Sarens Heavy Lift India Private Limited

PRISM LOGISTICS PVT LTD

BOXCO LOGISTICS INFRATRANS PRIVATE LIMITED