Civil Work

Name Of Work :- Construction of New Aganwadi at Vasna kotariya-3

Village Ta. Vadodara Dist. Vadodara under 4235 Samaj Suraksha &

Kalyan Grant (2026-27)

1 All works shall be carried out as per latest MORTH Specification Booklet and other specification

of Division as directed.

2 All Rates quoted include clearance of site (prior commencement of work and at its close) in all

respects and hold good for work under all conditions, site moisture, weather etc.

3 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S

dated 05.03.2011 with details specifications and details of works and amount involved at site at

his own cost as directed by Engineer-in-charge.

4 Testing of material shall be done as per statement attached with specification. The material should

be tested in GERI or Private laboratory approved by Govt. of Gujarat. Bill for testing charges

should be paid by Executive Engineer and computed after deducting the cost of materials to be

supplied by the Govt. and shall be recovered from the contractor's running bill as per Govt., R&B

Department No. TNC-1085/(4)/C dtd 20-12-91.

5 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building

and other Construction worker's welfare cess Act - 1996 (Labour & Employment Department

Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-05, Notification of Labour & Employment

Department Dtd. 03-01-05 and Labour & Employment Department letter No. CWA / 2004-841-

6 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR,

PRC-10/2017/Cement Consumption/16/C, Dtd. 11/05/2017 as stated in SOR therefore in RCC

items where there is a change as per actual mix design the cost of difference of cement

consumption shall be deducted from the rate of original item at the rate of input rate mentioned in

7 Bidders are advised to visit the site & make himself / themself aware of the scope & specification

of the work to be done & of conditions and other factors bearing on the execution of the work

before on line submission of his / their bids. Once the bid is finalized, under no circumstances

arguments for crust deficiency / additional / altered works will be heard until & unless Engineer in

charge deem so. Engineer in charge shall have right to reject & decision of Engineer in charge

shall be final & binding.

8 If found necessary, contractor will be intimated for negotiation. He will be intimated maximum

three times within validity period for negotiation. If contractor does not respond in time, his

earnest money will be forfeited and his tender will be rejected. Paneltative action will be taken on

such contractor.

Name Of Work :- Construction of New Aganwadi at Vasna kotariya-3 Village Ta. Vadodara Dist.

Vadodara under 4235 Samaj Suraksha & Kalyan Grant (2026-27)

Taluka :Vadodara District : Vadodara

INDEX OF SPECIFICATION

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful Attached Separetely

materials and disposing off the excavated stuff upto 50 Meter lead. for Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and Attached Separetely

stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead for

Dense or Hard soil

3 Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand :6 crushed stone Attached Separetely

aggregates 40 mm nominal size) and curing complete excluding cost of form work in(A)

Foundation and plinth (more than 10 ton)

4 Filling available excavated earth (excluding rock) in trenches. plinth, sides of Attached Separetely

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

5 Filling in foundation and plinth with Murrum or selected soil in layers of 20cm thickness Attached Separetely

including watering ramming and consolidating etc. complete

6 Brick work using common burnt clay building bricks having crushing strength not less Attached Separetely

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand) (Conventional Brick)

7 Brick work using common burnt clay building bricks having crushing strength not less Attached Separetely

than 35 kg./Sq.Cm. for GF Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(Conventional Brick)

8 Brick work using common burnt clay building bricks having crushing strength not less Attached Separetely

than 35 kg./Sq.Cm. for 1st Floor in Mortar 1:6 (1- Cement : 6 -fine sand) (Conventional

9 Half brick masonry in common brunt clay building bricks having crushing strength not Attached Separetely

less than 35 Kg/Sq.Cm. for GF in Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional Brick)

10 Providing and laying controlled cement concrete M.150 for curing complete including Attached Separetely

cost of formwork and excluding cost of reinforcement for reinforced concrete work for

11 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and reinforcement for reinforced concrete work in Foundations,

footings, Base of columns and Mass concrete.

12 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and excluding cost of reinforcement for reinforced concrete work

in Columns, Pillars posts and struts, For Ground Floor

13 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and excluding cost of reinforcement for reinforced concrete work

for Ground Beam and SOG Beam

14 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and reinforcement for reinforced concrete work in SOG Slab

15 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and excluding cost of reinforcement for reinforced concrete work

in Columns, Pillars posts and struts For GF Slab to 1st floor slab

16 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and excluding cost of reinforcement for reinforced concrete work

for Beams 1st Floor

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

17 Providing and laying controlled cement concrete M.200 and curing complete including Attached Separetely

the cost of formwork and reinforcement for reinforced concrete work in Slab 1st Floor

18 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- Attached Separetely

graded stone aggregates 20 mm nominal size) for R.C.C lintel including finishing

smooth with,curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for Ground Floor

19 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded Attached Separetely

stone aggregates 20 mm nominal size) for reinforced concrete Chhajjas not exceeding

10cm. thickness upto floor two level including finishing the exposed surfaces with

cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth and even surface centering

and formwork and curing complete excluding cost of reinforcement for Ground Floor

20 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, Attached Separetely

binding and placing in position complete for Ground Floor

21 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, Attached Separetely

binding and placing in position complete for First Floor

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or Attached Separetely

half brick walls for interior plastering and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) for Interior Plaster

23 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or Attached Separetely

half brick walls for plastering and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand) for Ceiling

24 20mm thick sand faced cement plaster on walls upto height 10 metres above ground Attached Separetely

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. External Plaster

25 Applying two coats of putty & two coats of primer of approved brand and manufacture Attached Separetely

on new wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth.

26 Applying 2 coat of Primer Coat of approved brands on exterior surface with proper Attached Separetely

cleaning etc. Item to be approved by engineer incharge or consulting engineer

27 Wall painting two coats with plastic emulsion paint of approved brand and manufacturer Attached Separetely

on wall surfaces to give an even shade including thorougly brushing the surface free

from mortar & other foreign matter and sand papered smooth

28 Ceiling painting (two coats) with plastic emulsion paint of approved brand and Attached Separetely

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

29 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to Attached Separetely

give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

30 Finishing walls with textured ( Rustic ) pattern for scribble walls on exterior plastered Attached Separetely

surface pattern to be approved with consulting engineer or Engineer Incharge

31 Providing and laying Machine cut free edges machine polished telephone black madras Granite Attached Separetely

stone slab 18mm (Average ) thick ( Single Piece not more than 150cm) for stair steps and risers &

Door/window frame as per design including full moulded round front steps & 1cm nosing &

necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement : 6 coarse

sand ) jointed with gray cement sluury including rubbing and polsihing etc. complete.

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

32 Providing and Fixing flush door both side laminated & I.T.W. beading all around by Attached Separetely

using I.T.W. frame 120 mmX 80 mm shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed wood based exterior grade

bonded BWP/BWR synthetic resin having stamped IS 12823 grade I type II including

three coats of lacquer polishing to exposed wooden surface & stainless steel decorative

type designs fixtures/ fastening etc including I.T.W trinagular batten patti of size 30mm

X 30mm etc as per architectural detailed drawing & as directed by engineer incharge.

33 Providing and fixing powder coated aluminium glazed casement window comprising outer frame Attached Separetely

of size 100 mm × 45 mm made from minimum 1.8 mm thick aluminium extruded sections and

openable casement shutters of size 47 mm × 75 mm made from minimum 1.5 mm thick

aluminium sections, with fixed/openable louver panels at both top and bottom fabricated from

mm × 25 mm aluminium louver frame sections complete with approved aluminium/glass louvers,

glazing beads, EPDM gasket, wool pile, friction stays, handles, locking arrangement, cleats,

brackets, screws, anchor fasteners and all necessary hardware fittings. The central portion shall be

glazed with 5 mm thick clear glass / 6 mm thick toughened glass as specified, fixed with approved

sealant system. All aluminium sections shall be powder coated in approved colour with minimum

50–60 micron coating thickness including fabrication, cutting, assembly, transportation, erection,

fixing in position, sealing with silicone sealant, making good surrounding surfaces and all

incidental works complete as per approved drawings and directions of Engineer-in-Charge

34 Providing and fixing M.S. Grills of required pattern to wooden frames of window etc. with M.S. Attached Separetely

Plate at required spacing & frame around square or round bar with rounded headed bolts and nuts

or by screws. (B) Plain grill.

35 Painting two coats (excluding priming coat) on new steel and other metal surface with Attached Separetely

enamel paint, brushing, interior to give an even shade including cleaning the surface an

even shade including cleanicn the surface of all dirt, dust and other foreign matter.

36 P & L 24" x 24" Vitrified tiles 8 mm thick tile flooring over 20mm (average) base of Attached Separetely

cement mortar 1:6 (1 Cement: 6 Coarse Sand) on new surface or fixing on existing

flooring by adhesive material includung dismentaling of existing flooring & jointed with

color cement slurry includung finished with flush pointing & cleaning the surface etc.

complet for light shade (up to 10 ton)

37 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement Attached Separetely

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc. complete

38 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 Attached Separetely

mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

39 Providing and laying approved make Simpolo full body vitrified tiles for decorative Attached Separetely

flooring of required size, shade, colour, texture and pattern, having uniform colour and

composition throughout the tile body, with water absorption less than 0.5%, laid over

prepared cement mortar bed / tile adhesive as specified, including cutting, grinding,

edge finishing, alignment to pattern, filling joints with matching epoxy/cementitious

grout, curing, cleaning and finishing complete. The work shall include all materials,

labour, wastage, handling, surface preparation, tools and accessories complete as per

manufacturer’s specifications, approved samples and directions of Engineer-in-Charge.

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

40 Providing Sandwitch Type Platform Using 25mm thick Single Polished kotah stone 75 Attached Separetely

cm Width at Top Width 16 to 18 mm Thick Premium Black Grenite Stone at Top with

75 mm Width and Face Patta Maximum 3.0 Mtr Long In Single Piece using Cement

Mortar 1:4 ( 1 cement : 4 coarse sand ) laid by 75 cm width & 75 cm High Resting On

25 mm Thick One Side Polished kotah stone fixed in wallc Cement Mortar 1:4 (

cement : 4 sand ) at Bottom Polished Kotah stone flooring including fixing grenite

stone & cutting the stone for Fixing suitable fixtures/ sanitary etc. if required with

Polished & Including Providing Premium Black Polished Grenite Stone 16 to 18 mm

Thick with round Border the edge,cost of sink. S S Grating Jali for nahni Trap, Brass

Waste Coupline ,PVC Waste Pipe, Manking Grove in Tile & Wall for Flooring Kotah

Stone & Granite ....etc.Complete as per Drawing & Directed by Engineer in charge or

consulting engineer

41 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with Attached Separetely

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

42 Providing and fixing Kitchen sink make cera/hindware/Kohler/Jaquar etc or similar with Attached Separetely

C.I. or M.S. brackets, painted white including cutting holes in walls and making good

the same . (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size.with fittings(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.a)Providing and

fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. b)Providing and fixing

M.I. fisher union for washbasin or sink. (A) 32mm dia. c)Providing and fixing pillar tap,

capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm

dia.d)Providing and fixing brass screw down stop tap.(A) 15mm dia.e)Providing and

fixing Rubber plug for sink or wash basin.

43 Providing and fixing Bib Cock ( Bib Tap ) make cera/hindware/Kohler/Jaquar etc or Attached Separetely

similar with wall flange & aerator. Item includes all labour, material and other cost. (ii)

15mm dia. Item to be approved by engineer incharge

44 Providing and fixing wsh down water closet wall hung matte finish outside and glossy Attached Separetely

inside (Indian type, W.C. Pan) make cera/hindware/Kohler/Jaquar etc or similar with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) with Seal and cover of size 510X365X380 mm. Item to be

approved by engineer incharge or consulting engineer

45 Providing and fixing gun metal check or non return fullway wheel valve (C) 25 mm Dia Attached Separetely

46 Providing and fixing gun metal check or non return fullway wheel valve (E) 40 mm Dia Attached Separetely

47 Providing and fixing 40mm Dual flush cock/valve make cera/hindware/Kohler/Jaquar Attached Separetely

etc or similar with Square plate made up of ss 304 to control cock operation of approved

quality including fixing in pipe line etc. complete. Item to be approved by engineer

incharge or consulting engineer

48 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted Attached Separetely

on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

49 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to Attached Separetely

wooden pluges with C.P. brass screws

50 Providing and fixing toilet paper holder.(A) C.P. Brass Attached Separetely

51 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure Attached Separetely

poluthene pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and

floor 75 mm Dia

52 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure Attached Separetely

poluthene pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and

floor 110 mm Dia

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

53 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure Attached Separetely

poluthene pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and

floor 160 mm Dia

54 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) Attached Separetely

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

55 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) Attached Separetely

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

56 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) Attached Separetely

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

57 Anti-Termite System:Providing and laying of permanent piping technology anti-termite Attached Separetely

treatment before flooring work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every 30 cm

interval in the tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of

loop pass through a PVC elbow of minimum 32 mm ID at junction box of wall and floor

level, entering into a steel reinforced grooved flexible pipe of minimum 22 mm ID

leading into junction box and the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control treatment. The anti termite

chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be injected by the

pressure pump diluted with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @

Ltr/SMT. The contractor shall submit approved line plan for piping system and junction

boxes dully approved by Engineer-in-Charge with bond of 5 year warranty.(i)Anti

Termite chemical injected area (Chemical injecting incl. labour cost)

58 Constructing brick masonry chamber for underground C.I. Inspection chamber and Attached Separetely

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

59 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water Attached Separetely

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

60 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block or Attached Separetely

tactile pavers 60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Applicable Separate Road

Tender Specification booklet attached

Discription of item as per schedule "B" of the tender.

Item No reference

Item No. Pg No.

61 Providing And Installation of LED TV As per directed by engineering incharge Attached Separetely

62 Providing And Installation of Water Purifier As per directed by engineering incharge Attached Separetely

63 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double Attached Separetely

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Electrical Booklet

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

64 Providing and erecting decorative wall bracket fittings complete with LED lamp and Attached Separetely

rust free fittings components mounted in chrome finish housing with holder Electrical Booklet

,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage

capacity as per instruction engineer incharge/architect/authority .cat-III

Deputy Executive Engineer Executive Engineer

Panchayat ( R & B) Sub Division Panchayat ( R & B) Division

Vadodara Vadodara

Name Of Work :- Construction of New Aganwadi at Vasna kotariya-3 Village Ta. Vadodara Dist. Vadodara under 4235 Samaj

Suraksha & Kalyan Grant (2026-27)

Taluka :Vadodara District : Vadodara

SCHEDULE FOR TESTING OF MATERIALS

For ensuring quality control and workmanship, various tests prescribed below for materials shall be taken at periodical intervals as stipulated below.

The material should be tested in GERI or Private laboratory approved by Govt. of Gujarat. Bill for testing charges should be paid Govt.

Item No. as Brief Description of materials to be Qty. of Unit Prescription of test which Frequency @ which test shall be Total Nos of

per tested. Materials shall be carried out carried out test to be

Schedule 'B' taken

1 Bricks 22953.00 Nos. *Water absorption 1 test @50,000 Bricks

*Strength Comprehensive

2 Kapchi 20 mm Nominal 29.54 Cum *Gradation test 1 to 100 - cum. 1 test

*Impact Value 100 to 500 - cum. 3 test

*Flakiness Index of 500 to 1500 - cum. 5 test

1500 to 5000 - cum. 7 test

3 Cement (OPC 53 grade) 22.600 M.T. *Consistency,Soundness 1 test @ 50.0 M.T. 100 T 2 tests,

*Setting time,Finessness Test 200 T 3 tests, 300 T 4 tests, 500 T 5 tests,

*Compressive Strength. 800 T 6 tests, 1300 T 7 tests & 8 testd for

large consingment.

4 Steel (TMT FE 500 D) 3.48 M.T. *Tensile, (TMT) As per Manual of Quality Control

Yield 1 test/40 tonnes / per category

9. Sch B Aganwadi @ Vasna kotariya-3 Village Ta.Vadodara.xls

Item No. as Brief Description of materials to be Qty. of Unit Prescription of test which Frequency @ which test shall be Total Nos of

per tested. Materials shall be carried out carried out test to be

Schedule 'B' taken

5 C.C.Cube Test 1:2:4 *Compressive Strength. 1 to 5 cmt - 1 No

M250 51 to above - 4 +1 additional sample

for each 50 cu.mt. Or part there of.

Note (1):- In case of excess in quantity. Further more test shall be carried out as per required frequency.

Note (2):- Apart from above listed materials for carrying out various tests during Road / Structure

Construction Works , if any other than above mentioned material/s are to be used during road /

structure construction work then it must be tested as per prevailing criteria of Govt. of Gujarat (R &

B Deptt.) and necessary tests should be carried out as per prevailing norms.

Signature of Contractor. Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat (R & B) Division

Vadodara Vadodara

9. Sch B Aganwadi @ Vasna kotariya-3 Village Ta.Vadodara.xls