WBPWD/EE/BED/13/e-IT of 2018_19

Amount

Dismantling the old existing wiring & existing old damages & unserviceable switch board TPNDB, SPNDB etc. By Co’s tools & tackles and as per G.S.

S & F,415V, 8way, VTPN DB box with provision MCCB as incomer and TP/SP MCB (as directed) out going with the following component Incomer:- 160A, 35KA 4 POLE MCCB -1 no Outgoing-63A/100A, TP MCB --------(4+2)nos, Blank plate -02 Nos. (Make- Legrand/ Crabtree/ I & T / Siemens/ ABB- Elegance Series)

S & F,415V, 6way, VTPN DB box with provision MCCB as incomer and TP/SP MCB (as directed) out going with the following component Incomer:- 100A, 25KA 4 POLE MCCB -1 no Outgoing-63A, TP MCB --------4 nos, Blank plate -02 Nos. (Make- Legrand/ Crabtree/ I & T / Siemens/ ABB- Elegance Series)

S & F cable entry box for 415V, 6 way VTPN DB box ( as make of VTPN) as per GS.

Supplying and fixing 415 V, 16-32 A per way, 6 way TPN MCBDB WITH SS ENCLOSURE DOUBLE –DOOR WITH ip- 42/43 protection with Four pole Isolator as incomer and SPMCBs (“C” Curve, 10 KA ) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish Inter connection with suitable size of copper wire and neutral link & provision for earthling attachment- 6way TPNDB, 80 A FP Isolator 18 nos.(6-32A) SPMCB including cable end box of same make and same rating ( Make – Legrand / Crabtree / L& T/ Siemens/ ABB- Elegance Series)

Supplying and fixing 250 V, 6-20 A per way, 2+10 way SPN MCBDB With SS enclosure double –Door with IP- 42/43 protection with DP Isolator as incomer and SPMCBs (“C” Curve, 10 KA ) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish Incl. Inter connection with suitable size of copper wire and neutral link & provision for earthling attachment- 63A DP Isolator as incomer and 10 nos.(6-32A) SPMCB as outgoing. ( Make – Legrand / Crabtree / L& T/ Siemens/ ABB- Elegance Series)

S & Laying of following XLPE cable as below, after cutting floor/ pavement /wall/ and making holes incl. embedding the cable at average depth as below and mending good the damages to original finish incl removing the rubbish a)4 core95 sq mm (To Existing Panel to new VTPN) (Make: Havells/Finolex/Glostar/Polycab)

S & Laying of following XLPE cable as below, after cutting floor/ pavement /wall/ and making holes incl. embedding the cable at average depth as below and mending good the damages to original finish incl removing the rubbish a)4 core 50 sq mm (To Exisiting Panel to new VTPN) (Make: Havells/Finolex/Glostar/Polycab)

Supplying and fixing compression type gland complete with brass gland brass ring & rubber ring for dust & moisture proof entry of XLPE/ PVC armored cables as below. a) ) 4 core 95 sq mm

Supplying and fixing compression type gland complete with brass gland brass ring & rubber ring for dust & moisture proof entry of XLPE/ PVC armored cables as below. a) 4 core 50 sq mm

Finishing the end of following XLPE / PVC armored cables by crimping method incl. supplying and fixing sold less socket ( Dowels make), tapes, anticorrosive paste & jointing materials: a) 4 core 95 sq mm

Finishing the end of following XLPE / PVC armored cables by crimping method incl. supplying and fixing sold less socket ( Dowels make), tapes, anticorrosive paste & jointing materials: a) 4 core 50 sq mm

Distn, wiring in 2x22/0.3( 1.5 sq mm) (ph. &N) and 1x22/0.3 (1.5 sq mm ) as ECC single core stranded ‘FR’PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC ) in 19 mm bore, 3 mm thick polythenpipe complete with all accessories embedded in wall to light/ fan/ call bell points Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. A) Avg.run. 8 mtr

Do------do--------do------ b)Avg run 10 mtr

Do…….do……do.. On- board.

Do…….do……do.. Avg. Run 4.5mtr. (sep. Plug point)

Distn, wiring in 1.1 KV grade 2x 22/0.33( 1.5 sq mm) single core stranded ‘FR’PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC ) partly in 200 mm size PVC rigid conduit ; FR; (Precision make) ( for ceiling portion only) and in 19 mm bore, 3 mm thick polythene pipe ( for horizontal & vertical run embedded in wall) with 1 x 22/0.3 (1.5 sq mm) single core stranded ‘ FR; PVC insulated & unsheathed copper wire for ECC, to light/ fan / call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no, suitable size “ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. ( only PVC Rigid Conduit on ceiling and remaining portion concealed) Avg.run. 9 mtr

Supply and fixing of on board 6A, 5pin plug socket

Supply & Fixing 240V, 16A, 3 pin Modular type plug socket (Brand approved by EIC ) with 16A Modular type switch, without plug top on 4 module GI Modular type switch board with top cover plate flushed in wall incl. S & F switch board and cover plate and making necy. Connection with PVC Cu wire and earth continuity wire etc.

Supplying and Drawing 1.1 KV Single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (approved make) of the following sizes Cutting after channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm/ 25 mm/ 40mm/50 mm thick polythene pipe by means of anchoring chemical (Hilti/sika) and GI’U’ hooks of 8 SWG incl. Supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tool and tackles 4x10 sq mm+2x6 sq mm as ECC (VTPN to TPN DB)

Do----------do-------do---------- 2x6 sqmm +1x4 sqmm ) as ECC (TPN to SPN DB)

Do----------do-------do---------- c)2x4 sqmm +1x2.5 sqmm) as ECC

Do----------do-------do---------- d)2x(2.5 sqmm )+1x(1.5 sqmm) as ECC

Do----------do-------do---------- e)2x(1.5 sqmm )+1x(1.5 sqmm) as ECC

Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- a)10 sqmm

Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- b)6 sqmm

Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- c)4 sqmm

Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- d)2.5 sqmm

Supply of 240V, single industrial type 4 ft long LED tube light fittings with CRCA housing complete with driver and all accessories incld supply of 1 no T-8 LED Tube light with aluminum heat akin having lumen output not less than 2000 as per approval of EIC. (Make- Havells/ Bajaj/ Crompton Greaves/ Wipro/ Philips- TMC 501 P1XT-LED 22W P3241)

Do---twin do-------------------------do----------------2 nos. T-8 LED tube light with aluminum heats hink each having lumen output not less than 2000 as per approval of EIC ( Total lumen output 4000) ( Make –Havells/ Bajaj/ Crompton Greaves / Wipro/ Philips)

Supply and fixing of 250V, 36 W 2 ft x 2ft LED Type surface / recess mounting low depth LED light fittings with driver and good quality defuse having system lumen output not less than 3200 lumen and lumen efficiency not less than 90 lumen per watt and input power not more than 40 watt , to be fixed on wall/ suspended from ceiling with 19 mm EI conduit / in false ceiling after necessary cutting and supporting arrangement as per material approval and direction of EIC .(make - Philips, cat no. – RC380B LED 34S-6500/ L60W60 PSU OD SI similar spec. of Crompton/wipro/Havells ).

S & F of suspended 12 W LED down lighter fittings lumen efficiency not less than 90 lumen per watt (Make- Crompton cat no.- LCDN-12-CDL/TL/WW, white/ similar specification of Wipro/ Havells/ Philips) as per material approval and direction of EIC. (For Five nos conference hall)

S & F of suspended 9 W LED down lighter fittings lumen output not less than 90 lumen per watt (Make- Crompton-cat no- LCDE-09-CDL, white/ Similar spec of Wipro/ Havell’s/ Philips) as per material approval and direction of EIC. (For Five nos conference hall)

Fixing only single/twin florescent light fitting suspended 25 cm bellow the ceiling with 2 no .20 mm dia EI conduit ( 14 SWG ) supports fixed with “1” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S & F EI conduit “L “ type ( 125 mm x 125mm) 6mm thick and 25 mm with MS Clamps and connecting the length of PVC insulated wire vend mending good damages to original finish and painting etc.2x24/0.20 mm flexible copper wire of 1.10 mt. length.

S & F 16” sweep wall bracket fan on wooden plank.(make- C.GOrient-cat no.- Wall 41/Havells)

Supply only 250V 1200 mm sweep minimum BEE 5 star rated AC ceiling Fan complete with all accessories except fan regulator (USHA-TECHNIX 5 star/ similar spec of Crompton Greaves-cat no- High Breeze/ Orient).

Fixing only ceiling fan complete with blades, canopy as per G.S.

S & F of Electronics two module Modular type Fan Regulator- Step type on existing modular

Supplying & Fixing of Modular type computer board having one no 3/5 pin 6/16 Amp. Socket with switch, three (3) nos. 5 pin 6 Amp, socket with individual controlled switch (Anchor) 1 no, 6 amp, fuse & 1 no. indicator fixed on 2 row 18 module switch board and earthling attachment as per direction of E.I.C. ( for Computer board)

S & Fixing VENTIL-AIR (DX) off White, exhaust fan, after making hole in Glass cutting and making good damages and smooth t finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia (Make-Havells, Cat no-FHVVEDXOWHO8/ ORIENT/USHA/EPC). 8’’ (200mm) Exhaust Fan.

Supplying & Fixing 250 V AC/DC superior type Call Bell (Anchor-8320) on HW board incl. S&F HW board

S & F modular type AC power unit having 6 module box with 25A Starter and MCB including S & F 25 A modular Socket ( brand approved by EIC) as per GS.

Earthling the installation by 2” dia G.I. (M) PIPE AS PER G.S. in soft soil. ( TATA Medium)

Supply & fixing earth busbar of galvanized ( Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm, from wall including providing drilled holes on the busbar complete with GI bolt, nuts, washers, spacing insulators etc as required.

Connecting the equipments (panel) to earth bus bar and also connecting earth busbar to pipe earth electrodes & between the electrodes including S & F 20 mm x 3 mm galvanized ( Hot dip) MS flat wall / floor with GI saddles as required and connecting the equipments incl. drilling holes, with bolts, nuts, washers etc.

Supply & Fixing Automatic Transfer Switch with Controller on angle iron frame on wall with nuts bolts etc. 125A (Make: Havells-Cat No-TCDE125/similar spec of L &T / HPL /Standard)

Do-Do-Do---------- b)160A (Make: Havells-Cat No-IHYTCDE160/similar spec of L &T / HPL /Standard)

Energy Metering panel considering-1 No, 3 phase Energy Meter-3 nos, Indicator, & kit kat Fuse ling in as encloser box fixed on wall.

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

MAHESWAR ELECTRICAL INDUSTRIES

S. N. ENTERPRISE

T. K. ENTERPRISE

BANDANA ENGINEERS CO-OPERATIVE SOCIETY LTD