SPL REPAIR TO BLDG NO T-388 AND CERTAIN MINOR REVENUE WORKS AT URI UNDER GE 969 EWS

Surface excavation n.exc 30 cm deep and averaging 15 cm in deep and getting out in any type of soil, complete all as specified and as directed.

Excavation over areas n. exc 1.50 deep and getting out in any type of soil, complete all as specified and as directed.

Removal of surplus soil to a distance of 250m and not exceeding 500m and depositing, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.

M&L PCC 1:4:8 type B-1 using (20mm graded crushed aggregate) as in subbase and in foundation concrete, complete all as specified and as directed.

M & L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM (1:4), complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and as directed.

Removing excavated soil exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

M & L for 75 mm thick Plain Cement concretE of type D-1, 1:4:8 20 mm graded aggregate) in sub base, complete all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface, complete all as specified and as directed.

M & L for Non skid/matt finish ceramic tiles 7 to 8 mm thick of size 400x 400 or more, in floors etc.set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over and including Screed bed or bedding layer of mortar 15mm of thick CM (1:4) for laying floor finishes, complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface(skirting) 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over and including backing of 10 mm tk CM1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate, complete all as specified and as directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius with built in CM (1:6), complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4), complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm Birla Wall putty, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

M & L for cement concrete of type Type B-0 1:2:4 (12.5 mm graded agg) in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F MS Cold rolled Butt hinges medium weight 100 mm long, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and as directed.

S & F Aluminium handles, cast type,anodised of size 150 mm, complete all as specified and as directed.

S & F of 150mm Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be including.

S & F vitreous China squatting pan, ‘Orissa’ pattern with P or S trap, size 580 x 440 mm white, with integral foot rests with PVC flushing cistern of 10 Litre capacity and flush pipe, complete all as specified and as directed.

S&F, vitreous China ware wash hand basin white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets all as spd as in repairs, complete all as specified and as directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.

S & F for 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

S & F 25mm internal dia PP-R Ball valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F for 25mm bore dia PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F waste coupling CP brass (half or full threaded) 32 mm dia, complete all as specified and as directed.

S & F Grating square 150 mm size of PTMT (Minimum weight 100gms), complete all as specified and as directed.

S & F for PVC flexible connections 15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.

S & F for 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F 20mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S & F 15mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

M & L for 75mm thick Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) in Plinth Protection and finished even and smooth without using extra cement, complete all as specified and as directed.

S & F for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and as directed.

S & F for PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with access door, complete all as specified and as directed.

S & F for PVC (SWR) pipes 40 mm dia fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

PVC (SWR) gully trap 150 mm, setting and jointing with solvent cement including grating, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and as directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal, complete all as specified and as directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc, complete all as specified and as directed.

S & F for wooden wall panelling & ceilling with tongue and groove 8 to 10 mm thick fixed to timber frame work complete all as specified and directed. Note: Timber frame work including 75 X 50 mm section c/c 600X600 mm

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.

M&L for preparing old plastered or nuplasterd surfaces of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed. .

M&L for providing cement concrete 1:2:4, Type B-0 (12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands,plinth courses, string courses, lacing courses, parapets railings upto 60cm in heigh, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L Rendering 15mm thick in CM (1:4) on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses maximum depression on face from straight edge held against the dressed surface n. exc 20mmon lime or sand stone, complete all as specified and as directed.

S&F angle or tee sections, fixed independently without connecting plates etc (cut to ordinary lengths i.e withing 20mm of the length indicated) for drain covers, complete all as specified and as directed.

M&L for bore of pipe in 450mm Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and as directed.

M&L for 150mm (1:3:6) Type C-2 (40mm graded stone agg),Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

Removal of excavated material (soil) n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point,complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:-

(a) One light point/fan point/Ex fan point/bell point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on same board with accessories

(c) One 3 pin 5 Amp switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universsal, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S & Fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

S&F in repairs Single door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and as directed.

S & F in repairs MCB, DP 40 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve, complete all as specified and as directed.

S&F LED Lamp 9 W 'T' type, complete all as specified and as directed.

S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed.

Supplying and fix PVC flat twin core cable PVC insulated aluminium conductor size 16 sqmm 2 core, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing in repair Non-metalic Ventilating Exhaust fan 250 mm sweep 230 volts, 50Hz,1200 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work as Excavation, RF and removal etc.

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 4 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc,with sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 2.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for switch socket combination, 3 pin, 15 Amps on independent board,complete all as specified and as directed.

S&F modular type switch 6 Amps, one way one module,complete all as specified and as directed..

S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module,complete all as specified and as directed.

S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module,complete all as specified and as directed.

S&F electric bell, ding dong AC 230Volts, single pole,complete all as specified and as directed.

S & F Modular Bell push 6 Amps, modular type,complete all as specified and as directed.

Supply and fix modular fan step regulator,120 Watt - 2 module,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc ,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc ,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc,complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc ,complete all as specified and as directed.

Supply and fixing MCB, DB,SPN, double door, IP-43, 12 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 8 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as speacified and directed.

Supply fixing MCB, SPN, 32/40Amp , 240 Volt, 50HZ, 10 KA, `B` series including making electrical connection with the help of legs/thimbles all as speacified.

Supply and fixing 240V, 10 to 32 Amp 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB,complete all as specified and as directed.

M&L for submain wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories,complete all as specified and as directed. Note :- (i) The minimum size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Seperate conduit shall be used for each submain wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run.

Supply and fixing 1x20 watt LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting complete all as specified and directed.

Supply and fixing 1x10 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting, complete all as specified and as directed.

Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ , complete all as specified and as directed.

M&L Telephone jack with pressed steel sunken box with 3 mm thick PVC top cover, complete all as specified and as directed.

Material and labour for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core, complete all as specified and as directed.

S&F electric water heater, storage Horizontal type outer body Engineering Thermoplastic plastic with puf injected type insulation , Steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 50 litre, 230 volts AC single phase BEE 4 Star rated complete with all accessories such as FR Grade 3 core PVC Cord ,multifunctional safety valve, thermostate, connection piece, 2x Hot & Cold (24'') PVC Connection etc, complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm (1/2”) dia with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

Switch socket combination 5 pin 15A flush Type, complete all as specified and as directed.

Note:- Schedule of credit Rs 17,090.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Please Enable Macros to View BoQ information