Loading…
Loading…
Tender Value
₹38.0 L
EMD Value
₹38,000
Closing Date
12 Feb 2026, 6:00 pmClosed
Superintending Engineer, PIU, Zone-6, Vadodara.
Strengthening work of CHC Dabhoi Ta: Dabhoi Dist: Vadodara.
273039
2025-26/144/02
Open
Civil Works - Buildings
Vadodara
1 document required · 1 mandatory
₹1,500
PIU-General Fund A/c 11-114
₹38,000
5 Feb 2026
5 Feb 2026
5 Feb 2026
12 Feb 2026
5 Feb 2026
Name of Work:Strengthening work of CHC Dabhoi Ta: Dabhoi Dist: Vadodara
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Removing and scraping of old deteriorated plaster of any thickness fromm wall /
Rupees Nineteen and
1 213.29 R.C.C member including stacking of serviceable material and disposal of smt 19.41
Paisa Forty One Only
unserviceable from site of work with all lead and lift
Removing dry or oil bound distemper by a washing and scraping and sand
Rupees Eleven and Paisa
2 1425.65 papering the wall surface smooth including necessary repairs to scratches smt 11.26
Twenty Six Only
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable Rupees Forty Seven and
materilas and disposal of unserviceable materials with all lead and lift. Paisa Ninety Four Only
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including Rupees One Hundred
4 12 chowkhats architraves, holdfasts and other attachment etc. complete and stacking Each 187.52 Eighty Seven and Paisa
them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. Fifty Two Only
Excavation for foundation upto 1.5 m depth including Rupees One Hundred
5 11.16 sorting out and stacking of useful materials anddisposing off the excavated stuff Cmt 120.01 Twenty and Paisa One
upto 50 Meter lead.(A) Loose or soft soil Only
Brick work using common burnt clay building bricks having Rupees Four Thousand
6 5.17 crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Cmt 4153.07 One Hundred Fifty Three
Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional and Paisa Seven Only
Providing 15mm thick cement plaster in single coat on
Rupees One Hundred
Rough (Similar)side of single or half brick walls for interior plastering upto floor
7 21.93 Smt 192.41 Ninety Two and Paisa
two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-
Rupees Seventy Seven
Providing TMT Bar FE 500D reinforcement for R.C.C. work
8 173.55 Kg 77.29 and Paisa Twenty Nine
including bending, binding and placing in position complete upto floor two level
Providing 10mm thick cement plaster in single coat on brick/concrete walls for Rupees One Hundred
9 213.29 interior plastering upto floor two level and finished even and smooth in (i)Cement smt 169.09 Sixty Nine and Paisa Nine
mortar 1:3 (1-cement:3-sand) Only
PIU Vadodara Page 1 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Distempeing (Two coats) with oil bound distemper of approved brand and
manufacture and of required shade on wall surfaces to give an even shade, over
and including a priming coat with distemper primer of approved brand and Rupees Seventy Three
manufacture after thoroughly brushing the surface free from mortar dropping and Paisa Seventy Only
and other foreign matter and also including preparing the surface even and sand
papered smooth.
Finishing wall with weather proof exterior emulsion paint on wall surface (two Rupees One Hundred
11 461.36 coats) to give an required shape even shade after thoroughly brushing the surface smt 117.4 Seventeen and Paisa
to remove all dirt, and remains of loose powdered materials.etc complete Forty Only
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty Rupees One Thousand
12 98 :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with smt 1001.14 One and Paisa Fourteen
pigment to match the shade of slab including rubbing and polishing etc. complete. Only
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of
cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Rupees One Thousand
13 74.15 flooring by adhesive material including dismentaling of existing flooring and Smt 1451.16 Four Hundred Fifty One
jointed with color cement slurry including finised with flush pointing & cleaning and Paisa Sixteen Only
the surface etc. complete for light shade (upto 10 ton)
Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and Rupees Nine Hundred
14 25.84 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand Smt 981.57 Eighty One and Paisa
) finishing with flush pointing in white cement. Fifty Seven Only
Providing and laying white glazed tiles 6mm thick in skrting risers of steps and Rupees Nine Hundred
15 49.98 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed smt 970.17 Seventy and Paisa
with white cement slurry Seventeen Only
Providing and fixing 30 mm wire gauge shutters using galvanised M.S. wire of I.S. Rupees Two Thousand
gauge designation of 85 G. with wire of 0.56 mm dia,for Doors, windows and Seven Hundred Seventy
clearstory windows including anodised alluminium butt hinges with necessary Three and Paisa Seventy
screws. (A) Indian teak wood. Two Only
Providing and fixing 35 mm thick shutters for Doors, windows and clerestory Rupees Five Thousand
windows including Indian teak wood frames 10 cm x 7 cm. size including Three Hundred Thirty
anodized alluminium fixtures and fastenings including primer coat of approved Eight and Paisa Thirty
quality and two coats of oil painting etc, complete. (ii) Fully Panelled. Only
PIU Vadodara Page 2 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Providing and fixing 35 mm thick shutters for Doors, windows and clerestory
Rupees Four Thousand
windows including Indian teak wood frames 10 cm x 7 cm. size including
Nine Hundred Eighty
18 10 anodized alluminium fixtures and fastenings including primer coat of approved smt 4989.65
Nine and Paisa Sixty Five
quality and two coats of oil painting etc, complete. (iii) Partly panelled and partly
Providing and fixing flush door both side laminated shutter fabricated from
mm thick solid core malemine faced three layered pre laminated flat pressed
wood based exterior grade bonded BWP/BWR synthetic resin having stemped IS Rupees Three Thousand
19 6.30 12823 grade I type II including three coats of lacquer polishing to exposed smt 3950.11 Nine Hundred Fifty and
wooden surfaces and Stainless steel decorative type designs fixtures/fastning etc. Paisa Eleven Only
including I.T.W. triangular batten patti of size 30 mmX30 mm etc as per
architectural detailed drawing and as directed by engineer in charge.
Providing and fixing EX-CEL or Equivalent make White or coloured water proof
Solid PVC Sheet made up of Poly Vinyl Chloride PVC resins solid high pressure
density 0.55 to 0.70 Kg/m3 molded sheet of 25 mm thickness as per required size
door shutter in single sheet panel in cut to size with both side 0.4mm thk and Rupees Three Thousand
20 6.72 4feet width self adhesive furniture film Solid including SS hinges with necessary smt 3508.17 Five Hundred Eight and
screws and SS fixtures and fastening etc. comp. As per Architect instructions Paisa Seventeen Only
and drawing or as directed by engineer in charge.Hardware SS 304 Hinges size
127x76x3.4mm, 15 cm Door Handle both side of shutter ,two nos. of 30 cm long
ss Aldrop and 20 cm long Tower Bolt with Round Bar 12mmØ,
providing and fixing alluminium colour anodized single shutters Doors having
standared extruded alluminium colour anodized hollow sections Prtly Openable
and Partly Fixed Type With frame of size 101 mm x 44.5 mm x 2 MM (aproximate
wt 2.60 kg per Rmt) and door styles and top rail of alluminium section size
mm x 44.5 mm x 2 MM (approximate wt 1.25 kg per rmt) and bottom rail and lock Rupees Two Thousand
rail per door of size 114 mm x 44.5 mm x 2 MM tHICK ( aproximate wt 2.75 kg Seven Hundred Fifty Two
per rmt) and providing rubber gasket and glazing clips around the glass all over and Paisa Forty Seven
including providing 9 mm thick decorative water proof Both side prelaminataed Only
pressed wood based board with fixing Glasing clips 19 X 17 mm including
providing heavy locks handels stopers pivots door closers and Ground Glass 5 mm
thick (Frosted or obscured on one side) on top with fixing Glasing clips 19 X
mm including all labour and equipments etc complete
PIU Vadodara Page 3 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Providing and fixing fully openable Partly Glazed Partly Panelled standard
extruded alluminium door of double shutter with colour anodized hollow section
frame of approved shade & pivoted double shutter fabricated from aluminum
standard section for outer frame size 101.60mm x 44.75mm x 1.75mm (of jindal
section no:2425 @ Wt 1.301 Kg /Rmt) and door style size 85.00mm x 4.45mm
Rupees Three Thousand
x1.56mm (of jindal section no:4590 @ Wt 1.139 Kg /Rmt) and top & bottom rail
22 5.16 smt 3087.25 Eighty Seven and Paisa
of aluminium section size 95.25mm x 44.45mm x 1.70mm (of jindal section
Twenty Five Only
no:4553 @ Wt 1.301 Kg /Rmt) and lock rail size 150mm x 44.45mm x 2.65mm
(of jindal section no:4600 @ Wt 2.786 Kg /Rmt) including providing rubber
gasket and glazing clips ( @ Wt 0.124 Kg/Rmt) around the Acrylic Sheet Scretches
proof fixed with transparent silicon gasket including all required materials labour
and equipments as per detailed drwg. As directed.
Providing & fixing in position standard extruded Aluminum Three track with
Three sliding shutters in which Two Shutters with Glass and one shutter with
Stainless Steel Mosquito net In Opening Possition always one of Mosquito net
shuuter should be in Close Possition all window section with colour anodized in
which Bottom Frame Section 92.00 x 29.5 X 1.20 mm (having wt per Rmt
Kg) Frame section having three track top and side of section size 92.00 x 29.50 x
1.20 mm size (having wt per Rmt 0.907 Kg) with top section for all Three
shutters Top and Bottom rail 20.00 x 50.00 x x 1.50 mm ( having weight per Rmt = Rupees Two Thousand
23 7.56 0.642 Kg) handle section of size 20.00 x 50.00 x x 1.50 ( having weight per Rmt = smt 2446.62 Four Hundred Forty Six
0.571 Kg ) and interlock rail 20.00 x 50.00 x x 1.50 mm ( having weight per Rmt = and Paisa Sixty Two Only
0.697 Kg ) of approved shade & sliding shutters and providing rubber gasket and
Glsing Clips if necessary around the glass allover including providing heavy
handle, heavy lock, bracket, stoppers.In Two Shuuter Glass 4 mm thick (Frosted
or obscured on one side) fixed with transparent silicon gasket and in one Shutter
Stainless Steel Mosquito net C.S. 304 (Reliance Brand) Approved Quality as
directed By Enginner Incharge including all required materials labours and
equipments as per detailed drwg. as directed.
Providing laying and jointing in true line and level 15mm dia.U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall Rupees Seventy Two and
with the help of clamp at every two metre C/C or shall beconcealed as directed Paisa Sixty Five Only
including necessary fittings etc. includingtesting of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
PIU Vadodara Page 4 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Providing laying and jointing in true line and level 25mm dia.U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall Rupees Ninety One and
with the help of clamp at every two metre C/C or shall beconcealed as directed Paisa Eighty Four Only
including necessary fittings etc. includingtesting of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 40 mm dia.U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
Rupees One Hundred
be fixed on the wall
26 105 Rmt 148.12 Forty Eight and Paisa
with the help of clamp at every two metre C/C or shall beconcealed as directed
including necessary fittings etc. includingtesting of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
Rupees Three Hundred
poluthene pipes of the following outside Dia. Low densidy, complete with special
27 85 Rmt 339.05 Thirty Nine and Paisa
falnge compression type fittings, wall clipsetc. including making good the wall
ceiling and floor.(G)110 mm
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
Rupees Two Hundred
polythene pipes of the following outside Dia. Low densidy, complete with special
28 45 Rmt 280.23 Eighty and Paisa Twenty
falnge compression type fittings, wall clipsetc. including making good the wall
ceiling and floor.(F) 75mm
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size
580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for
separately) (A) Vitreous China.(I) Long pattern = White colourProviding and Rupees One Thousand
29 4 fixing 100mm size P or S trap for water closet squatting pan including jointing the Each 1349.1 Three Hundred Forty
trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Nine and Paisa Ten Only
Vitreous China.Providing and fixing G.I. inlet connection for flush pipe with W.C.
Providing and fixing wsh down water closet (European type, W.C. Pan) with
integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1
(1-Cement : 1-fine sand) (Seal and cover to be measured and paid for Rupees One Thousand Six
30 2 separately)(A) vitreous China Pattern :(i) in white colour Providing and fixing G.I. Each 1667.42 Hundred Sixty Seven and
inlet connection for flush pipe with W.C. PanProviding and fixing plastic seat and Paisa Forty Two Only
cover for wash down water closer with C.P. brass hinges and rubber buffers. (B)
Black plastic seal and cover.
PIU Vadodara Page 5 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.
brackets painted white including sutting holes and making good the same but
Rupees One Thousand
excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm
31 5 Each 1563.59 Five Hundred Sixty Three
size. (i) In white colour.Providing and fixing C.P. brass waste for washbasin or
and Paisa Fifty Nine Only
sink. (A) 32mmdia.Providing and fixing M.I. fisher union for washbasin or sink.
Rupees Two Hundred
Providing and fixing chromium plated brass half trun flush cock of approved
32 10 Each 263.77 Sixty Three and Paisa
quality including fixing in pipe line etc. complete.(ii) 25mm dia.
Seventy Seven Only
Rupees One Hundred
Providing and fixing screw down bib taps of following size.(A) Brass screw down
33 15 Each 186.83 Eighty Six and Paisa
bib tap polished bright. (i) 15mm dia.
Eighty Three Only
Rupees Two Thousand
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white
Three Hundred Twenty
34 3 including cutting holes in walls and making good the same but excluding fittings. Each 2326.66
Six and Paisa Sixty Six
(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
Constructing brick masonry chamber for underground C.I. Inspection chamber
and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.
1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. Rupees Three Thousand
35 8 of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- Each 3660.76 Six Hundred Sixty and
graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster Paisa Seventy Six Only
15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x
700 mm and 450mm deep for pipe line with one or two inlets. (upto 10 ton)
Rupees Four Hundred
Providing & fixing gun metal check or non-return full way wheel valve (C)25 mm
36 6 Each 420.63 Twenty and Paisa Sixty
Rupees Two Thousand
Providing and laying cement concrete 1:4:8 (1- Cement : 4- Coarse sand : 8-
Seven Hundred Forty
37 32.8 Graded Brick bats aggregate 40mm normal size) and curing complete excluding Cmt 2747.21
Seven and Paisa Twenty
cost of formwork in (A) Foundation and Plinth
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- Rupees Three Thousand
38 6.65 graded stone aggregates 20 mm nominal size) and curing complete excluding cost Cmt 3656.13 Six Hundred Fifty Six and
of formwork in (A) Foundation and Plinth Paisa Thirteen Only
PIU Vadodara Page 6 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Providing and fixing Godrej Type Steel cupboards in wall with steel frames and
Rupees Two Thousand
shutters using 18 gauge M.S. steel sheet including necessary fixtures , fastening
39 60.75 smt 2215.33 Two Hundred Fifteen and
like locks handles, hinges with approved shade of sparay painting etc complete as
Paisa Thirty Three Only
Providing and fixing 0.75meterwide and 0.80Meter hight sand which type
Rupees Five Thousand
platform including supplying and fixing granite stone 18 mm thick mirror
Three Hundred Eighteen
40 11.25 polished stones in top and side position and vertical strip at front over 25 mm smt 5318.32
and Paisa Thirty Two
thick polished kotah stone platform fixing in top and sides and intermediates
supports fixing with cement mortar and adhesive and finishing etc complete.
Providing and laying polished Green Marble stone 18mm thick in Door Frame,
Window Jambs laid on 10mm thick cement mortar 1:3 ( 1 cement : 3 coarse Rupees One Thousand
41 10.44 sand ) and jointed with grey cement slurry with matching pigment incl. rubbing smt 1521.06 Five Hundred Twenty
and polishing etc complete colour and shed as approved by achitect and engineer One and Paisa Six Only
Providing erecting and fixing double coated Syntex or equivalent PVC. (ISI) mark
Rupees Three and Paisa
42 8000 water tank of reqd capacity each with all necessary fittings & connection etc. comp Lit 3.95
Ninety Five Only
Painting two coats (excluding priming coat) on new steel and other metal surface
with enamel paint, brushing, interior to give an even shade including cleaning the Rupees Ninety and Zero
surface an even shade including cleanicn the surface of all dirt, dust and other Paisa Only
foreign matter.
Painting two coats (excluding priming coat) on new wood and wood based Rupees One Hundred
44 112.68 surface with enamel paint, interior to give an even shade including cleaning the smt 107.95 Seven and Paisa Ninety
surface of all dirt, dust and other foreign matter sand papering and stopping. Five Only
Removing and refixing existing door or window with frame and shutters including Rupees Three Hundred
45 42.72 making good the damaged wood work and applying two coats of oil paint etc. smt 395.26 Ninety Five and Paisa
complete. Twenty Six Only
Provinding and laying Dr.Fixit water proofing treatment on terrace including
cleaning, washing and drying crack or terrace area upto 20. mtr height. Grooving
in cracks 5mm wide depth and clean proper then apply Dr.Fixit crack-x- paste for
Rupees Five Hundred
filling cracks and dry upto 4 to6 hour. Then prime the surface with Dr. Fixit
46 2764.32 sqm 585.55 Eighty Five and Paisa
primeseal diluted with potable water by volume in 2:1 ratio(2 part primer and
Fifty Five Only
part water ) and alloe it to dry for 2 to 3 hours. and finally apply Dr.Fixit new coat
in three layer.All three layer should be in three different colour for proper
PIU Vadodara Page 7 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Steel work, welded in built up sections framed work
including cutting, hoisting, fixing in position and applying a Rupees Nine Thousand
47 48.13 priming coat of red lead paint. (A)In beams and joists,channels angles Tees, flats, Quint 9108.48 One Hundred Eight and
with connecting plates or angle cleats as in main and cross beams. Hip and jack Paisa Forty Eight Only
rafters,purlins conneted to common rafters and the like
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L
Rupees Seven Hundred
Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.
48 288.93 smt 734.19 Thirty Four and Paisa
limpet washer. filled with white lead complete excluding the cost of purlins,
Rafters and Trusses.(1) 0.80 mm thick sheet.
Providing and fixing to wall, ceiling and floor galvanised Rupees Seven Hundred
49 96.00 Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and Rmt 794.18 Ninety Four and Paisa
clamps including making good the wall ceiling and floor.(F) 50mm Eighteen Only
Providing and laying trimix vaccum dewatering process controlled cement
concrete M-200 and curing complete excluding the cost of form work including Rupees Six Thousand
50 20.00 using vaccum dewatering machine mechanical vibrator, mechanical floater & Cmt 6400.32 Four Hundred and Paisa
mechanical trowel for finishing by mixer machine as directed including cutting Thirty Two Only
groove & filling joint as specialized etc. comp.
PIU Vadodara Page 8 of 9 SCH B
QUANTITY MAY TENDERED RATES
ITEM BE MORE OR
ITEM DESCRIPTION PER AMOUNT
NO. LESS IN FIG IN WORDS
Total Estimated Amount(Civil+Electrical)
I/We am/are Willing to carry out the work at ..................... % above/below percent (should be written in figures and words) of the estimated
rates mentioned above.Amount of my tender works out as under
* Estmated amount Put to tender Rs........... * Estmated amount Put to tender Rs...........
Net Rs.......... Net Rs..........
Note 1 :- All work shall be carried out as per Public Works Department Handbook and other specifications of
2 :- All thedirected.
columns in Schedule should be filled in ink and the total of the enteries in the last colummn
Note 3 be stuckquoted
:- Rate by theinclud
contractor underofhis
clearence sitesignaure
( prior cmmencement of work at its close ) in all respects and hold
good for work under all cinditions, site, moisture,
Note 4 :- To be continued on additional sheets, if found weather, etc.
Note 5 :- GST at 2% of Value of Workdone shall be Recovered from Contractors Bills.
Contractor shall Give Details of his GST No. while Submitting Tender.
Deputy Executive Engineer Executive Engineer
Project Implimentation Unit, Project Implimentation Unit,
Zone-6B, Vadodara (Rural-1) Zone-6B, Vadodara (Rural-1)
PIU Vadodara Page 9 of 9 SCH B
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Civil Building Specification Book.pdf
02 Electrical Specification Book.pdf
03 Circular Part 1.pdf
04 Circular Part 2.pdf
05 Special Condition.pdf
06-01 Civil Make List 2025.pdf
06-02 Special Instruction to Bidder.pdf
07 SBD Book Dabhoi.pdf
08 SCHEDULE B FINAL Dabhoi.pdf
09 Specification Civil.pdf
10 Tender Document 144-02.pdf
Download all tender documents and submit your bid