Loading…
Loading…
Tender Value
₹23.1 L
EMD Value
₹46,203
Closing Date
24 Jun 2026, 3:00 pm2d left
Similar tender results from the same govt authority in the past 3 years.
The EE,MCD,PWD(B),ILS Road, Agartala
o/o the EE,MCD,PWD(B),ILS Road, Agartala
Repair and maintenance of windows and ventilators including fixing of grills at Old Building, Jayanti Block, SS Block and Auditorium within AGMC and GBP Hospital premises, Agartala.
2026_CEPWD_73865_1
27/EE/MCD/PWD(B)/2026-27
Open Tender
Civil Works - Building
60 days
AGMC and GBP Hospital, Agartala
Please refer to Tender Documents
3 documents required · 3 mandatory
₹1,000
₹46,203
17 Jun 2026
17 Jun 2026
24 Jun 2026
17 Jun 2026
24 Jun 2026
17 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete
Fixed to openings /wooden frames with rawl plugs screws etc. | 9,000 | Kg | 169.7 | ₹15,27,300 | BI01010001010000000000000515BI0100001112 |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
Karai Wood | 0.5 | cum | 1,11,635.8 | ₹55,817.9 | BI01010001010000000000000515BI0100001113 |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 12 | sqm | 3,367.7 | ₹40,412.4 | BI01010001010000000000000515BI0100001114 |
| 4 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) | 50 | no.s | 190.1 | ₹9,505 | BI01010001010000000000000515BI0100001115 |
| 5 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. | 10 | sqm | 8,166.8 | ₹81,668 | BI01010001010000000000000515BI0100001116 |
| 6 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:
Using flats 30x6mm for diagonal braces and central cross piece. | 6 | Kg | 4,486.4 | ₹26,918.4 | BI01010001010000000000000515BI0100001117 |
| 7 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-Charge. | 70 | kg | 117.4 | ₹8,218 | BI01010001010000000000000515BI0100001118 |
| 8 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. | 150 | sqm | 1,148 | ₹1,72,200 | BI01010001010000000000000515BI0100001119 |
| 9Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :- | ||||||
| 9.1 | For fixed portion of approved quality:-
Powder coated aluminium ( minimum thickness of powder coating of 50 micron ). | 120 | kg | 516.4 | ₹61,968 | BI01010001010000000000000515BI0100001121 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
DNIT.pdf
Tender Documents • 2.91 MB
BOQ_75176.xls
BOQ • 0.29 MB
INTEGRITY.PDF
Additional Documents • 0.05 MB
Download all tender documents and submit your bid