Deposit work of Tvm Corporation Project no 2020 21 S0070 21 Extension of pipe line at Various places of Thrikkannapuram ward under Thirumala section

Amount

Tar cutting

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

Earthwork Excavation

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

Fencing

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

Laying of Pipe lines.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

Interconnection

OD76157/2022-2023:Supplying and fixing PVC Reducer 110x90 / 110x75 / 110x63 mm as per site condition

OD76159/2022-2023:Taking connection from the existing main (Double boring) including earthwork excavation, boring the main supplying and fitting saddle piece 2 Nos, 25mm brass ferrule 2 Nos, 25mm GM, Full way wheel valve 2 Nos, bend 2 Nos, Union 2 Nos, 32mm PVC adopter 2 Nos, 110x32mm PVC Reducer2 Nos and connecting the newly laid main testing the joint etc. complete rate as per item No. 100.1.1 of SH KWA approved data

OD76160/2022-2023:Taking connection from the existing main (Single boring), including boring the main, supplying and fitting saddle piece 1 nos, 25mm brass ferrule 1 nos, 25mm GM full way valve 1 no, bend 1 no, union 1 no, 32mm PVC adapter 1 no, reducer 1 no and connecting the newly laid main, testing the joints etc. complete.

OD76175/2022-2023:Supplying and Fixing 110 mm CIR /100 mm CID joint(excluding GST)

OD76176/2022-2023:Supplying 90mm PVC end cap (10 kg/cm2)

OD76179/2022-2023:Supplying 80 mm CID joint

OD76180/2022-2023:Supplying and fixing 90 mm PVC Bend 10 Kg /cm2

OD76182/2022-2023:110mm PVC Bend (10 kg/cm2)

OD76183/2022-2023:110 mm End cap (10 kg/cm2)

Alteration of Existing water connection

OD76188/2022-2023:Providing Alteration of house connection from existing main including earth work excavation, supplying and fitting suitable saddle piece, supplying and fitting 20mm brass full way wheel valve 1 no, bend 1 no, union 1 no, elbow 3 nos, etc and connecting the newly laid main, testing the joints etc complete but excluding coast of pipe

OD77618/2022-2023:Supplying 20mm ASTM Pipe

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Cost of Material

100.98.236:Supply of PVC Pipe, 10kg/cm2, 90mm Dia.

100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia.

Construction of Valve Chamber

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

OD77421/2022-2023:Conveying and fixing CI MH Cover with frame from the departmental store to site and placing in position etc. complete.

OD77620/2022-2023:Cost of CI MH Cover

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.

100.98.512:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm.

100.98.513:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 100mm.

K AJITH KUMAR

YESUDAS T

Sunilkumar

SUDHARMAN V

SASIDHARAN NAIR V

Anoop AJ

Bidder Name

MOHANAKUMAR V

Sunilkumar

SUDHARMAN V

K AJITH KUMAR

Anoop AJ

YESUDAS T

SASIDHARAN NAIR V