Construction of Milma Outlet and the civil works for the Audio visual room at Milma Malappuram Dairy project site under MRCMPU LTD

Amount

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Disamntling and stacking the existing aluminium framed glass/louver/acp partitions without damage as per the directions of engineer in charge.

Excavation (manual / mechanical) in all types of soil for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, pits including back filling, shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth

Excavation (manual / mechanical) in all types of soil for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, pits including back filling, shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From 1.5m to 3 m depth

Excavation (manual / mechanical) in ordinary rock, over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth

Excavation in hard rock (requiring blasting) for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, manhole chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL up to 3m depth.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

Providing and laying in position plain cement concrete of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) including the cost of centering and shuttering - All work up to plinth level

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.<br>Note: minimum cement content to be used in this item is @ 330 kg/ cum. Excess cement used as per design mix will not be paid seperately. All work up to plinth level

Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.<br>Note: minimum cement content to be used in this item is @ 330 kg/ cum. Excess cement used as per design mix will not be paid seperately. All work above plinth level upto floor V level

Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.<br>Note: minimum cement content to be used in this item is @ 360 kg/ cum. Excess cement used as per design mix will not be paid seperately. All work above plinth level upto floor V level

Providing and fixing in position up to floor five level 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) grade precast cement slabs including shuttering but excluding reinforcement.

Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc.

Centering and shuttering including strutting, etc. and removal of formwork for concrete elements in all sizes, shapes and direction including necesosry staging, scaffolding etc for all levels below ground level and upto highest plinth level. Complete

Centering and shuttering including strutting, etc. and removal of formwork for concrete elements in all sizes, shapes and direction including necesosry staging, scaffolding etc in superstructure above plinth level and upto floor V level. Complete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Thermo - Mechanically Treated bars of grade Fe-500 or more

Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) for ceiling

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:;Water thinnable cement primer

Providing and applying two or more coat Premium acrylic emulsion paint (apex apcolite or equivallant) of required shade as per manufacture recommendations over one coat approved interior primer including all labour charges and materials for necessary scaffolding, required ladders etc (The broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint)

Providing and applying two or more coat Premium Acrylic Smooth exterior paint (apex ultima or equivallant) of required shade applied as per manufacture recommendations over one coat exterior primer applied as per manufacture recommendations including all labour charges and materials for necessary scaffolding, required ladders etc. (The broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

Providing and laying vitrified tiles different sizes (thickness to be specified by the manufacturer) in floor and skirting with water absorption less than 0.08% and conforming to IS : 15622, of approved make with a basic price of not less than Rs.60/sqft in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),including 3mm spacer joints and filled with epoxy etc., complete. Size of Tile 600x600 mm.

Providing and fixing vitrified glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make in all colours, shades of any size as approved by Engineer -in-Charge, in wall over tile adhesive for wall tile fixing including corner beading, 3 mm spacer joints fill with epoxy of the same brand.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Structural steel work bolted or welded in built up sections, trusses, framed work, purlins etc, including cutting, hoisting, fixing in position and applying two coat of approved epoxy steel primer and one coat approved epoxy paint all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, purlins etc., including cutting, hoisting, fixing position and applying applying two coat of approved epoxy steel primer and one coat approved epoxy paint, including welding and bolted with special shaped washers etc. complete.

Providing and fixing aluminium composite panel ceiling and fascia using aluminium extruded architectural square or rectangular sections (min 0.300 kg/m) to form grids of size 600x600mm and fixing 3mm thick aluminum composite panel (0.25mm aluminium coil thickness) of approved make and colour to the frame work using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant etc. The basic frame work shall be propoerly hung/fixed on the existing roof structurals using aluminium extruded angles/square tubes at proper intervals. ( The exposed area shall be measured in sqm for payment. The acp bent up or turned back to the frame shall not be paid.)

Providing and fixing panelled side hung doors made of powder coated aluminium extruded architectural sections of specified size with shutter comprising of section having bottom rail of size 100mmx44.5mmx1.85 mm thick, lock rail of size 100 mm x 44.45 mm x 2 mm thick, top rails 50mm x 44.45 mm x 1.50 mm thick , vertical style 50mm x 44.45 mm x 1.80 mm thick. The top and bottom rail shall be reinforced with 8/10mm dia rods. The door shall be panelled with 3mm thick aluminium composite panel at bottom and 5mm thick approved glass at top including handle, EPDM gasket, screws, fastners, lock & key, door stopper etc. as per the drawing and specifications. (Area of door opening shall be measured in sqm for payment.)

Providing and fixing powder coated fully glazed two track two paneled sliding windows made of powder coated aluminium extruded architectural sections of 27mm series frames 45x45mm and 65x27.1 mm shutter frame all having wall thickness of 1.4 ± 0.2 mm and glazing with 5mm thick approved clear/reflective type glass including necessary glazing bead of appropriate dimension, handle, lock, EPDM/Neoprene gasket, screws, fasteners etc. as per enclosed technical specifications, drawings and/or directions of Engineer in charge. The gap in between aluminium frame and adjacent rcc/brick/stone work shall be sealed by weather silicon sealant over backer rod of approved quality. (Out to out area of the window frame shall be measured in sqm for payment.)

Providing and fixing louveres made of powder coated aluminium extruded louver profiles (min 1mm thick) fixed to outer frame work including fastners, screws etc. complete.

Providing and fixing in position full height/half height storage, cupboard, counter etc comprising of 18 mm thick approved marine ply, 1 mm thick approved laminate/mica to all surfaces including necessary hardware, approved fittings & fixtures, brackets, approved adhesive, labour etc.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.

Providing and fixing wall mount open storage glass rack with 6mm glass including aluminium powder coated bracket, frame, vacuum, fittings etc complete.

Providing and fixing free standing open storage glass rack with 6mm glass including powder coated bracket, frame, vacuum, fittings etc complete.

Providing, fitting and fixing 12mm thk frameless toughened glass partition making edges clear smooth polished with various stainless steel fittings like Wall to Glass clamping patch, silicon etc., as per direction of Engineer in Charge. Material and fittings brand shall be Ozone, Hafele, Dorma or equivalent.

Providing, fitting and fixing 12mm thk frameless Toughened glass double leaf swing door with making holes/ cut outs as required, making edges clear smooth polished with various stainless steel fittings like SS Hinges with necessary Pivot accessories along with fittings like Over Panel , Top Patch , Bottom patch , Over Panel , Wall to Glass clamping patch, Hydraulic hinges, Glass Door Handle back to back installation of 600mmx32mm, door locking system, and necessary door assemblies, rubber gasket, fixed on double action floor spring with proper closing force, etc., as per direction of Engineer in Charge. Material and fittings brand shall be Ozone, Hafele, Dorma or equivalent.

Providing and fixing FRP moulded type door frame and shutters from extruded PVC sections 90mm x 60mm having multichamber cross section with minimum 1.5mm wall thickness and duly reinforced with steel to be mitre cut at corners and welded for frame and 30mm thick factory made door shutters. A tie rod to be provided at bottom and top. including handle, ss slide latch lock, necessary weather seals etc.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (white) :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing white vitreos china urinal partition of approved make.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.:15 mm nominal bore

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Providing and fixing C.P. brass angle valve of approved quality conforming to IS: 8931: 15 mm nominal bore

Providing and fixing UPVC ball valve :50 mm nominal bore

Providing and fixing UPVC ball valve :40 mm nominal bore

Providing and fixing UPVC ball valve :32 mm nominal bore

Providing and fixing UPVC ball valve :25 mm nominal bore

Providing and fixing UPVC ball valve :20 mm nominal bore

Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) - 75 flush capacity

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of jointscomplete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - Exposed on wall/slab

Providing and fixing Rectangular type 150x150mm SS 304 gratings of approved quality.

Providing and fixing PVC multi floor trap

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2

Providing and fixing PVC pipes, fittings including jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

Providing and fixing PVC pipes, fittings including jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 160 mm dia 6 Kgf/cm2

Providing and fixing PVC pipes, fittings includings jointing of pipes and fittings with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

Providing and fixing PVC pipes, fittings including jointing of pipes and fittings with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

Supplying and fixing C.I. manhole cover with frame, C.I. gratings for chambers & man holes of specifed size, shape and weight as per the direction of Engineer in charge.

Constructing manholes of size 0.6x0.6m(clear inside) of depth up to 1m including excavation, 100mm thick PCC in 1:5:10,15cm foundation concrete and 15cm thick RCC wall in RCC 1:1.5:3, wall plastering CM 1:4 both inside and outside, benching and channeling with PCC 1:2:4 and finishing the channel smooth RCC top cover of 10cm thick setting and fixing CI Heavy duty manhole cover of 550 mm dia medium duty.

Charges for core cutting of slabs/beam depth up to 150mm, including labour , conveyonce,supports, disposal of debris etc. size up to 110 mm dia

Charges for core cutting of slabs/beam depth up to 150mm, including labour , conveyonce,supports, disposal of debris etc. size : 150mm dia to 200mm dia

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8183 density 48 Kg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.

ELECTRICAL WORKS

DIESEL GENERATOR

Supply Installation, erection ,testing and commissioning of 3 phase 15 KVA Diesel generator,all standard accessories and control wiring, including testing of neutral CT, relays, meters etc.

Supply and Labour charges for erection of additional length of MS[B class medium grade]exhaust pipe line of suitable sizes ,with heat resistant Al painting to building top for 15 KVA DG.

Supply, installation, testing and commissioning of Metering Panel as per specification in NIT

LT CABLE LAYING:

Supply, Laying, testing and commissioning of following sizes of 1.1KV XLPE insulated, PVC sheathed Aluminium conductor (A2XFY) UG Cable through HDPE pipe/excavated trenches/cable tray/hume pipe/wall including supply and fixing of clamping materials.

4c x 16 sqmm

4c x 10 sqmm

4c x 6 sqmm

Supply, Laying, testing and commissioning of following sizes of 1.1KV XLPE insulated, PVC sheathed Copper conductor UG Cable through HDPE pipe/excavated trenches/cable tray/hume pipe/wall including supply and fixing of clamping materials.

4c x 2.5 sqmm cu cable

4c x 4 sqmm cu cable

LT CABLE TERMINATION:

Supply and providing indoor end termination of following sizes of 1.1KV XLPE insulated, PVC sheathed Al conductor (A2XFY) UG Cable including supply of necessary steel glands, Aluminium lugs and gland earthing by copper shim etc complete.

4c x 16 sqmm

4c x 10 sqmm

4c x 6 sqmm

End Termination of Armoured Copper Cable with suitable glands & sockets

4c x 2.5 sqmm cu cable

4c x 4 sqmm flat cu cable

EARTHING

PIPE EARTHING

Supply & Labour charges for Providing efficient pipe earth stations using 38mm dia 2.5m long GI pipe electrode, filling salt sand and charcoal, construction of earth chamber and covering with heavy duty cast iron cover hinged to cast iron frame, including excavation and refilling. inclusive of and all connected civil works

EARTH GRIDS

Supply of following sizes of copper flats/GI flat/copper wires for earthing of HT switch yard equipment, motors, isolators, push button stations, switchboards, motor control centers, distribution Boards, Generator etc. and Interconnection of earth pits as per technical Specification. Earth strip/wires to be taken through GI pipes/ cable trays/hume pipes/built in trenches/soil etc. wherever necessary. Rate shall be including excavation and refilling and all connected civil works, necessary tinning, providing cu sockets brass nuts & bolts,welding and end termination of copper strips/wires with all accessories required for the completion of work.

25x3 Cu Strip

No.8 SWG Cu

No.10 SWG Cu

CABLE TRAY

Supply & Labour for Fabrication and fixing of Vertical/Horizontal type M.S. Angle Cable Trays and MS flat for supporting cable /pipes using suitable accessesories. The same shall be fixed on ceiling/wall. The cable trays and supports shall be painted with 2coats of Zinc chromateprimer and 2coats of enamel paint.

DISTRIBUTION BOARD

3PHASE 8WAY TPN HORIZONTAL LDBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 6way Horizontal DB with Double Door With 40A 4P 30mA ELCB 1Nos and 40A 4P MCB 1Nos as incomer and 24Nos 6A/10A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 8WAY TPN HORIZONTAL PDBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 8way Horizontal DB with Double Door With 63A 4P 100mA ELCB 1Nos and 63A 4P MCB 1Nos as incomer and 24Nos 10A/16A/20A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

1PHASE 12WAY SPN DBs Supply & Labour charges for Installation, testing & commissioning of 1Phase 12way SPN DB with Double Door With 32A DP 30mA ELCB 1Nos and 32A DP C curve MCB 1Nos as incomer and 10Nos 10A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications

POINT WIRING

Supply and carrying out wiring for light points, plug points and fan points including testing and commissioing in concealed/surface conduit system from control board to the respective points.Wiring is to be done by using single core PVC insulated stranded 1.1 kVgrade class2 FRLSH copper wire size of 1.5sqmm along with same size wire as earth continuity conductor through rigid 20/25mm PVC ISI grade conduit with necessary bends,Junction boxes, ceiling roses/angle batten,fan hooks,GI box and all accessories including modular type switches and plate.(The point length limited to 5 mtrs ). One Light Point Controlled by one number 6A Switch

same as item No.1.099 but Two light point controlled by one number 6A Switch

same as item No. 1.099 butThree light point controlled by one number 6A Switch

same as item No. 1.099 but 1 No. ceiling fan point controlled by 1 No. 6A switch, Without regulator

same as item No. 1.099 but Exhaust fan/Bracket(including socket) Fan Point controlled by 1 No. 6A SP Switch

same as item No. 1.099 but 6A plug point in combined position

same as item No. 1.099 but 6A plug point in independent position

same as item No. 1.099 but 1 No. Light point controlled by two numbers 6A two way switch

MODULAR COMBINATION OF SOCKETS

Supply and fixing of Modular combination socket for EB Power outlets (1 Nos. 6A socket & 1 No. 13A Multi socket with 2 Nos. 6A switchs suitable front plate and back box including internal connections etc complete)

Supply and fixing of Modular combination socket for EB Power outlets ( 2 Nos. 6A socket & 1 No. 13A Multi socket with 2 Nos. 6A switch suitable front plate and back box including internal connections etc complete)

Supply and fixing of 16A 230V Modular type Power Socket with one number 16A switch with suitable front plate and back box light indication, fuse including internal connections etc complete.

CIRCUIT WIRING

Supply and carrying out circuit wiring or extra length more than 10 mtr in point wiring in concealed/surface conduit system using following runs of single core PVC insulated 1.1 kV grade Class 2 copper wire FRLSH through 20/25mm PVC ISI grade conduit with necessary bends,Junction boxes, including giving connections etc complete.

3 runs 1.5 sqmm

3 runs 2.5 sqmm

3 runs 4 sqmm

Supply and fixing of 20A SP, 2P+E metallic socket with cover and plug top fitted in a suitable metallic enclosure controlled by 20A SP MCB with nuetral link and inter connections etc complete. As per IEC 61439-3

Supply and fixing of 32A SP, 2P+E metallic socket with cover and plug top fitted in a suitable metallic enclosure controlled by 32A SP MCB with nuetral link and inter connections etc complete. As per IEC 61439-3

Supply and fixing of IP65 junction box with terminals :139 mm X 119 mm X 70 mm

LIGHT FITTINGS Supply and fixing testing and commissioning on roof/truss/ceiling/fall ceilings/wall/pole of the following CFL/LED light fixtures with drivers/fans with rate include supply of screw fixing arrangement and 3 -core 1.5 sqmm flexible wires. (Supply of Light Fixtures shall be in the scope of MRCMPU).

12W Surface Mounted Light

12W Recessed Ceiling Light

20W LED tube light

40W LED tube light

60W LED street light

100W LED Flood Light

Supply installation testing and commissioning BLDC Ceiling Fan

Supply installation testing and commissioning BLDC Wall Fan

Supply installation testing and commissioning Heavy duty wall Fan

EXTRA LOW VOLTAGE SYSTEM:

Supply and laying of CAT 6 cable through exisiting PVC conduit for DATA Wiring/Camera Wiring

Supply and laying of following type PVC Conduit with all accessories for Data cabling/Camera concealed or surface system

20MM PVC Conduit

25MM PVC Conduit

APPROVAL :Preperation of drawing,and getting all necessary approvals [initial/final],inspection etc from the electrical inspectorate including soil resitance test. Providing all paper work including HT agreement prepration & assistance in availing power allocation from EB etc