Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.0 L+₹1.3 L (11.1%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹16.4 L+₹4.8 L (40.9%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR TO CERTAIN E/M INSTALLATION GUARD POST, WATCH TOWER AND MISC WORK AT TBRL RANGE AND TBRL COLONY AT RAMGARH
2023_MES_598271_1
GE I R AND D /CHD-34/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹30,000
Yes
11 Aug 2023
30 May 2023
29 Jun 2023
30 May 2023
27 Jun 2023
13 Jun 2023
31 May 2023 - 12 Jun 2023
Amount
Material and labour for complete removal of existing treatment and applying two coat of white wash on ceiling complete all as specified and directed.
Material and labour for complete removal of existing treatment and applying two coat of white wash on wall complete all as specified and directed.
Material and labour for preparation by complete removal of existing treatment of walls washing, rubbing down by wire brushes using necessary filling compound of wall Putty to obtain smooth regular / even finish, using sand paper and treating the wall with efflrosencese removal solution where required and applying two coat of oil emulsion distember complete all as specified and directed. Note- the efflorescence removal solution will be paid seprately.
Material and labour for complete removal of existing treatment of Cement Base Paint. Preparation of old surface with necessary filling compound of white external water proof putty and treating the wall with efflrosencese removal solution where required and applying two coat of cement base paint of approved make & colour complete all as specified and directed. Note- the efflorescence removal solution will be paid seprately.
Supply only Liquid efflorescence removal solution complete all as specified and directed.
Material and labour for preparation of old surfaces of walls including complete removal of existing treatment of external surfaces washing, rubbing down by wire brushes stopping of surfaces & levelling / edging the disturbed places / edges using necessary filling compound of white cement wall Putty to obtain smooth regular / even finish, using sand paper and applying two coats of smooth exterior acrylic emulsion paint over a coat of primer complete all as specified and directed. (Tint and shade as approved by the GE).
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description over 10cm girth or widhth no otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.
All as per serial item No 9.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.
All as per serial item No 10.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.
Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and directed.
Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.
Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.
Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.
Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.
Supply and fixing for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.
Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0 complete all as specified and directed.
Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.
Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
Supply and fixing for MS barrel tower bolt stove enameled black with bright bolt 200mm long complete all as specified and directed.
Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed.
Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.
Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed.
Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Hacking out old broken glass(any thickness,size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and directed.
Supply and fixing for 4 mm thick figured sheet glass ordinary quality with oil putty in square n exc. 0.5sq m in each pane complete all as specified and directed.
Supply and fixing for silicon sealant adhesive (240ml) each pack
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation or mass concrete complete all as specified and directed.
Material and labour for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and directed.
Supply and fixing for Glass dividing strips, 3 mm thick 38 mm wide inserted in position, conform to design complete all as specified and directed.
Demolition of brick work or stone /boulder masonary built in cement mortar including all quions , arches, pillar etc complete all as specified and directed.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 39.00 above but except brick complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
Material and labour for rendering 5mm thick cement plaster 1:3 on fair faces of concrete surfaces in ceiling complete all as specified and directed.
Material and labour for two coats of oil bound distemper over a coat alkali resistant priming paint on walls including preparation of new surfaces complete all as specified and directed.
Material and labour for applying two coats of white wash on ceiling including preparation of new surfaces complete all as specified and directed.
Material and labour for two coat of cement based paint over a coat of primer on newly plastered surfaces of walls incl preparation of surfaces. complete all as specified and directed.
Chipping of unsound/weak concrete material 25 mm avg thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as specified and directed.
Cleaning of reinforcement from rust from the reinforcing bars upto 12 mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed.
Cleaning of reinforcement from rust from the reinforcing bars above 12 mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed.
Providing, mixing and applying bonding coat of SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer approved adhesive on chipped portion of RCC complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises. complete all as specified and directed.
Material and labour for glazed ceramic tiles (coloured) 300x200x7mm/450x350x7 thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 10mm thick rendering CM 1:4 complete all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to8 mm thick jointed free squarere/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to8 mm thick jointed free as in skiriting squarere/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering CM 1:4 complete all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to8 mm thick jointed free squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to8 mm thick jointed free as in skiriting squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering CM 1:4 complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs complete all as specified and directed.
Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Supply and fixing for 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed.
Supply and fixing for 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed.
Supply and fixing in repair 15mm dia Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed.
Supply and fixing in repair 15 mm dia fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.
Supply and fixing in repair 15 mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) complete all as specified and directed.
Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.
Supply and fixing in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed.
Supply and fixing in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
Supply and fixing in repair SS fancy type curtain rod of 20 mm dia with two no of bracket & final per running meter complete all as specified and directed.
Supply and fixing for in repair CP grating 110 dia complete all as specified and directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.
Material and labour in repair precast cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate for jallies 25 mm thick set in cement mortar 1:4 including all moulding frame complete all as specified and directed.
Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of wrought iron or MS work of any description complete all as specified and directed.
Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavy brackets framing ( Beam tee, angle, square, rectangular hellow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed.
Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed.
All as per serial item no 80.00 above item but gear type operated by handles complete all as specified and directed.
Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair complete all as specified and directed.
All as per serial item no 81.00 above but 1.25mm thick gear operated type with level gear box & crank hands.
Material and labour for applying two coat of PU based tile weather coat with a coverage of 5 Sqm/ Ltr/ 02 coat after removing vegetation, shurb with wire brush to remove algae, fungus &moss and throughly pressure washing the surface tile. The cleaned surface to be primed as per thinning of 1 ltr tile coat with 1 ltr of water which needs to be applied by manufacturer guideline and complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.
SONA BUILDERS
shree balaji builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .