REPAIR AND MAINT OF CERTAIN MAP AND OTHER FURNITURE AT GE IMA DEHRADUN

Amount

Charpoy OR steel FD/E6/MAP-II/01 FD- 220R

Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and all as specified and directed by Engineer-in-Charge

Removing old unserviceable long rail and S & F new Long Rail of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete all as specified and directed by Engineer-in-Charge.

Removing old unserviceable Short rail and S & F new Short Rail of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete all as specified and directed by Engineer -in- Charge

Removing old unserviceable Legs and S & F legs converstion from Short Rail item No. 2.30 of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying Two coat of spray painting of approved shade of approved quality paint

Bed hard steel (FD/E6/MA/P/08)

S & F following components of Bed hard steel including dismantling unservicable one all as specified and directed. 12mm thick BWR phenol bonded commercial plywood on top of the bed. Make : Greenply/Archid Ply/Century Ply

Head Board 18mm thick prelaminated particle board including 04mm PVC beading.

Foot Board 18mm thick prelaminated particle board including 04mm PVC beading.

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Black synthetic enamel paint including four Nos of hard rubber shoes.

FMN Holder duly welded

Renewal of following unserviceable parts of "Almirah large steel 1/2h x 1/2s" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-1033

S&F New lock made of steel of 6 lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coat of synthetic emamel paint over and including one coat of zinc primer of directed shade by Engr-in-Charge over a coat of primer.

S & F steel Handle 110 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F 3 way locking device including all mechanism with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coat of synthetic emamel paint over and including one coating primer of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 110mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

S&F of suitable pattern MS clamps for holding of almirah shelves and length.

S&F new chromium plated 20 mm dia hanging rod of existing shape and size.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Almirah steel med (FD 67/1032)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F Handle 110 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 110mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coat of synthetic emamel paint of approved shade over and including a coat of primer all as specified and directed.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge/GE.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

M&L for renewal of following U/S parts of "Computer chair revolving/high back and med back" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge Drg( FD/E6/MAP/01)

S&F suitable new one 12 mm thick hot pressed plywood complete to match the original seat as shown on drg.

S&F suitable new one fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new one tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the seat fixing as exesting.

S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.

S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.

S&F suitable MS bearing of existing shape & size of various type chair revolving steel.

S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.

S&F suitable caster wheels of existing shape & size with nut & bolts.

M&L for Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.

Renewal of following u/s parts of "Chair dining MAP Officer" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/MAP-II/04)

S&F renewal of front legs.

S&F renewal of rear legs.

S&F renewal of stiffeners.

Replacement of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed.

Renewal of of u/s plywood of seat with 6mm new comercial plywood.

Renewal of of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed.

S&F of new Buffers

Tightening of complete chair by suitable size Bambo Skewers & wood corner as directed by Engr-in-Charge at site upto satisfaction of Engr-in-Charge.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following u/s parts of " Table bed side MAP" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD/E6/MAP/15)

S&F new top of existing size made of 18mm thick prelaminated MDF board with 4mm thick teak wood half round beading all round of table top.

S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.

S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading.

S&F suitable size new back/base of table bed side, made out of 6 mm thick commercial ply wood duly screwed as shown on drg as directed.

S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of drawer as approved by GE.

S&F of new handle for drawer of table bed side MAP as approved by GE.

S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.

Repair/repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.

Repair/repalcement of old u/s rear legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table Bed Side match with MDF grains and synthetic enamel black paint on wooden/steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed.

Renewal of following unserviceable parts of "Chair Dining JCO's /ORs" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge(FD/MAP-II/05)

S&F of renewal of 4mm thick PVC seat with holes & is not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge. (Make-Amko/Cello)

Renewal of Buffers

Renewal of Front leg (teak wood)

Renewal of Rear legs (teak wood)

Renewal of Front/rear rail (teak wood)

Renewal of Stiffeners.

M&L for Tightening of complete chair by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following U/S parts of "Table Dressing (Gents)" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/E6/MAP/16)

5mm thick looking mirror (Make- Saint Gobin/ Modi Guard) with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.

12mm thick back ply of box .

Top/base of table dressing (Gents) made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.

Side planks of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.

05 mm thick plain glass self in table dressing as shown on drg.

Beading of 4mm thick and fixed with headless nail.

M&L for Tightening of complete table by suitable size nails as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains

M&L for Renewal of following U/S parts of "Table Dressing (ladies) with Stool " with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/07)

Electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.

Parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick teak wood half round beading as per drg & directed.

Frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge

Top of table dressing ladies (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

Side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

Door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

New bottom (box) of 12mm thick plywood as shown on drg.

New Stainless steel piano hinges and one nos magnetic catcher as shown on drg.

New heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.

New 50 mm long 'D' shaped stainless steel handle as approved by GE.

New 75 mm long 'D' shaped stainless steel handle as approved by GE.

New bottom of 06mm thick plywood for stool dressing (box) as shown on drg.

New 12mm th ply openable shutter for stool dressing (box) as shown on drg.

New cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.

New leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.

S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.

S&F suitable new front plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

S&F suitable new back plank for stool dressing (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading.

S&F suitable new wooden battern (1" x 1")

S&F suitable size new side plank for stool dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.

Tightening of complete table dressing by suitable size nails and screw as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains

M&L for renewal of following u/s parts of "Computer table" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge (FD/E6/MAP/03 GE/PN/23)

S&F new top of 18mm thick prelaminated MDF board with 1mm thick PVC beading.

S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.

S&F new mouse tray of 18mm thick prelaminated MDF board with both side sliding arrangement, including beading.

S&F new keypad tray of 18mm thick prelaminated MDF board including beading.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.

S&F new drawer of 18mm thick prelaminated MDF board with both side sliding arrangement including beading.

S&F of new bottom shelf of 18mm thick pre- laminated MDF board including beading .

S&F of new hard rubber shoes (black)

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.

M&L for Renewal of following unserviceable parts of "TV trolly" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD/E6/MAP/04( R )

S&F of new top of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading all round of top as directed.

S&F of new bottom / side planks of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading as shown on drg as directed.

S&F of shutters shall be of plain glass 5.5 mm thick duly fitted with stainless steel hinges of reqd length as per drg or as directed by Engr-in-charge.

S&F of magnetic catcher shall be provided as shown on drg as directed.

S&F of coasters made of stainless steel body with hard rubber roller as shown on drg as directed.

Tightening of complete trolly by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats walnut/lacquere polish for all beading and view portion of table dressing match with grains

M&L for renewal of old torn u/s Mattress cover with new required size cover of best quality cloth, cloth should not be less then Rs 150/- per meter, including a long side TKK chain fixed properly on the mattress as approved by GE. (TP)

M&L for renewal of old torn u/s Pillow cover with new required size cover of best quality cloth (white), cloth should not be less then Rs 200/- per meteras approved by GE.(TP)

M&L for renewal of following U/S parts of "Chair Dining Special " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed . Drg PN/F/26

S&F of new Front legs

S&F of new Rear legs

S&F of new Front / rear rail (including holes for caning)

S&F of new Side rail (including holes for caning)

S&F of new Arm/handle

S&F of new Stiffener

Buffers

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

M&L for renewal of following U/S parts of "Chair Easy FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-229

S&F of new Front/Rear legs

S&F of new Side rails (including holes for caning)

S&F of new Front/Rear rails (including holes for caning)

S&F of new Arm/Handles

S&F of new Stiffeners

Buffers

Tightening of complete chair by suitable size nails/ Screw and bamboo Skewers & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Canning of Seat of Chair Easy before final coat of lacqure polish

Canning of back of Chair Easy before final coat of lacqure polish

M&L for renewal of following U/S parts of "Chair Easy DC/Chair Easy with DRC" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. DB-3972 & DB-4089

S&F of new Front legs

S&F of new Rear legs

S&F of new Front /back rails (including holes for caning)

S&F of new Side rails (including holes for caning)

S&F of new Arm/Handles

S&F of new Stiffeners

Buffers

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Canning of Seat of Chair Easy before final coat of lacqure polish

Canning of back of Chair Easy before final coat of lacqure polish

M&L for renewal of following U/S parts of "Chair Dining FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-279

S&F of new Front legs

S&F of new Rear legs

S&F of new Front/ back rails (including holes for caning)

S&F of new Side rails (including holes for caning)

S&F of new Stiffeners

Buffers

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Canning of Seat of Chair before final coat of lacqure polish.

M&L for renewal of following U/S parts of "Chair Writing FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD -202,250, 280

S&F of new Front legs

S&F of new Rear legs

S&F of new Front/ back rails (including holes for caning)

S&F of new Side rails (including holes for caning)

S&F of new Arm/Handles

S&F of new Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Canning of Seat of Chair Writing before final coat of lacqure polish

M&L for renewal of following U/S parts of "Stool Dressing" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD 252, 282

S&F of new Legs

S&F of new Stiffeners

S&F of new Side rails (including holes for caning)

Buffers

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Canning of Seat of Stool dressing before final coat of lacqure polish

Repair and re-canning of "Chair varandha" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. FD-256

S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.

Tuck welding to broken legs and frames of chair verandah

S&F of new PVC shoes 20mm dia at bottom of legs.

M&L for Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour.

M&L for Re-canning of chair verandah both seat and back with 4/5mm wide and half round superior quality white plastic cane as approved by GE

M&L for renewal of following U/S parts of "Chair Writing MAP/Chair Visitor" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-in-Charge.FD/E6/MAP/12

S&F suitable new12 mm thick hot pressed plywood for seat.

S&F suitable new moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the seat.

S&F suitable 12 mm thick hot pressed plywood for back.

S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back

S&F suitable new synthetic tapestry/leatheritte raxine cloth as approved by GE (Cloth shall not be less than 300/- per RM) alongwith PVC lipping all round the back

S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable new rubber stopper.

M&L for Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface.

Repair Chair varandha MAP

S & F in repair MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded components of Chair verandah all as specified and as directed.

Tuck welding to broken legs and frames of chair verandah

S&F of new PVC shoes 20mm dia at bottom of legs.

M&L for Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality.

S&F PVC Seat of approved quality

S&F PVC Back of approved quality

Reapir of Teapoy Verandah MAP ( FD/E6/MAP/17)

M&L for renewal of old u/s legs Teapoy verandah adjoing with exesting rails and mesh with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.

M&L for Rubber shoes

Renewal of Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete as dircetd by Engr-in Charge

M&L for Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of approved shade & quality.

REPAIR TO TABLE CENTRE(FD-235, 274).

Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mm thick preliminated MDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

Removing of old U/S Rails and S&F new Rails of seasoned shisham/teak wood as per drg match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Table with sand/emery paper and applying lacquer polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified

S&F Buffers suitable for table centre.

TABLE CENTRE 2 TIER

Removing of old U/S existing top and bottom from center table 2 Tier and S&F new top and bottom of size as per drg. Top and bottom shall be 18 mm thick preliminated MDF/Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

Removing of old U/S Rails and S&F new Rails of seasoned shisham/teak wood as per drg match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying lacquer polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified

S&F Buffers made of PVC.

Repair to Trestle Store Room Wooden DrgFD-86(M) DB-410:- M&L for taking out old unserviceable/broken long rail from Trestle Store room wooden and S&F new long rail made out of 2nd class hard wood of size 2440X110 X110mm thick made to shape and all as specified and shown on Drg No FD-86(M) DB-4101 and directed by Engr-in-Charge.

M&L for taking out old unserviceable/broken Middle rail from Trestle Store room wooden and S&F new Middle rail made out of 2nd class hard wood of size 1220X65X110mm thick made to shape and all as specified on Drg.FD-86(M) DB-4101 and directed by Engr-in-Charge.

M&L for taking out old unserviceable/broken Legs from Trestle Store room wooden and S&F new Legs made out of 2nd class hard wood of size 400X110 X110mm thick made to shape all as specified and as shown on DrgFD-86(M) DB-410. and directed by Engr-in-Charge

M&L for preparation of wooden surfaces of the Trestle Store Room with sand/emery paper and applying One coat of Black Paint Synthetic Enamel over and including one coat of primer of Approved Quality.

SOFA SET Single Seater (TP): M&L for removing the old worn/torn out cushion from SOFA SET Single Seater (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new synthetich tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 350/- per metre) with tapering as existing

M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Chair Revolving with Arms(TP)/ Chair high back mesh tourision bar mech, make - Eezy model - 280/Chair high back recliner wooden base arms, make - eezy model - 210,Chair revolving steel w/arms FD- 75 (m)/Chair Computer Make Eezy and Godrej (all are high back Executive chairs)

Removing old unsv Hydraulic mechanism and S & F new Hydraulic mechanism of approved quality complete all as specified. Make of Hydraulic Mechanism :-CSS Power Hydraulic, P P CHAIR Power Hydraulic or equivalent.

Removing old unsv castor wheel and S & F new castor wheel of approved quality complete all as specified. Make of Seltos/Breewell & PP Chair

Removing old unsv hand rest and S & F new one as existing shape and size should be fitted with suitable nut bolt/welding with all iron surface directed to view when placed in position shall be painted with enamel paint using spray machine to match the colour and provision of leatheritte raxine wherever required rest all as directed of approved quality directed by Engr-in-Charge make of : PP Chair/Rajchief and Breewell

Removing old unserviceable back frame from Chair Revolving and S & F new back frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tapestry cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

Removing old unserviceable Seat frame from Chair Revolving S & F new Seat frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tapestry cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge

REPAIRS TO SIDE BOARD FD-371, 4241

Removing of unserviceable drawer and supply & fixing new drawer as per drawing as to match with exesting

Removing of unserviceable knobs/Handle and S&F new Handle/knobs as directed by Engr-in Charge

Removing of unserviceable top and S&F new top of 18/19 mm thick pre laminated MDF board exterior Gde I, type II confirming to IS-12823 as per drg.

Removing of old unserviceable plywood of back side and S&F of new 4mm thick commercial plywood ISI marked as per drg.

Removing of old unserviceable side supplied and fix new side pre limanited MDF board 18 mm thick as per drg and as directed by Engr-in Charge

Removing of old broken/unserviceable doors and S&F of new door made of 18 mm MDF board one side teak face & 4mm thick teak wood beading alround duly fitted with piano type hinges, all as directed by Engineer-in-Charge.

M&L lacquer polishing with high class finish to complete side board whereever requred as to match with grains of MDF boards.

Repairs to Bin Soiled linen small/large

Removing of unserviceable drawer and supply & fixing new drawer as per drawing as to match with exesting

Removing of unserviceable knobs/Handle and S&F new Handle/knobs as directed by Engr-in Charge

Removing of unserviceable top and S&F new top of 18/19 mm thick pre laminated MDF board exterior Gde I, type II confirming to IS-12823 as per drg.

Removing of old unserviceable plywood of back side and S&F of new 4mm thick commercial plywood ISI marked as per drg.

Removing of old unserviceable side supplied and fix new side pre liminated MDF board 18 mm thick as per drg and as directed by Engr-in Charge

Removing of old broken/unserviceable doors and S&F of new door made of 18 mm MDF board one side teak face & 4mm thick teak wood beading alround duly fitted with piano type hinges, all as directed by Engineer-in-Charge.

M&L lacquer polishing with high class finish to complete side board whereever requred as to match with grains of MDF boards.

Table Dining 6 Person 150cmx90cm (Drawing no.FD/MAP-II/03)

S&F following components of Table including dismantling unservicable one all as specified and as directed. Leg Shall be made of first class teak wood

Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete.

Short Rail shall be made of first class teak wood as directed

Long Rail shall be made of first class teak wood as directed

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Buffers

Sofa Set 5 Seater(1+3+1) with cushioned. (Drawing no.FD/MAP-II/02)

M&L for removing the old worn/torn out cushion from sofa sets 5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 350/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of Sofa Set 5 Seater(1+3+1) with cushioned.and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new rear leg to match the original complete all as specified and directed.

M&L for removing unserviceable seat plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new plywood of 12 mm BWR to match the original complete all as specified and directed.

M&L for removing unserviceable back plywood of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F back plywood of 12 mm BWR to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for three seater of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F new back rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken hand rest of Sofa Set 5 Seater(1+3+1) with cushioned. and S&F New hand rest to match the original complete all as specified and directed.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

S&F Buffers

Table ORs steel with Aluminium Top ( 8'x2'-6"x2'-6")

S & F Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion of Table ORs steel including dismantling unservicable one all as specified and as directed.

S & F Stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion of Table ORs steel including dismantling unservicable one all as specified and as directed.

M&L for Table top in repair made of 18mm thick Particle/MDF Board one side white and one side teak finish laminated duly ediging withhalf round beading of approved quality. Make of Board : Archid Play, Bhutan Ply, Green Ply, Century Ply

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of approved shade & quality.

S & F in repair PVC shoe in Table dinning ORs steel with Aluminium Top complete all as specified.

M&L for Renewal of following U/S parts of "Teapoy" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD-232 /278/382

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 600x400mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

Stiffeners

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

avtarsinghchaddha (BID ID -3328761)

Raghav supplier & contractor (BID ID -3339643)