PROVISION OF PARKING SHED FACILITY FOR 02 TATA COACHES AT 17 FBSU UNDER GE AF TRIVANDRUM

Amount

Schedule'A'

Excavation in post holes each not exc 0.50 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceding 25 cm, watering and well ramming removing surplus soil to a distance not exc 50m and making good surfaces complete all as specified and directed

M&L for plain cement concrete in foundation filing and mass concrete in 1:4:8 type D2 (using 40mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

S & F TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cills, steps; copings, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S & F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long complete all as specified and directed.

S & F plates (plain or chequred) channels, square cut or notched (ordingary and counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and directed..

S & F mild steel work (misc) as in hold fast, cleat, wall ties and similar articles conf to Fe-290 Ge E-165 complete all as specified and directed..

S & F rolled mild steel work in tubular trusses including, special shaped washer etc. complete unsing ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and directed..

M & L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F MS flats as wind ties for roof including securing bolts drilling holes, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plainsteel sheet of 0.50 mm thickness and approved colour having tensile strength of 550 Mpa as in roof covering ridges/wall cladding fixed with self taping screws complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any discription applying two coat of epoxy paint over a coat of epoxy primer

DJ Group

Lucky Enterprises

DEFT GROUP ELECTROMECHANICAL