Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹40.0 LAccepted-AOC | ₹40.0 L Quoted ₹40.4 L | 1 | Accepted-AOC L1 BIDDER |
| 2 | 2₹42.0 L+₹1.6 L (4.06%)Rejected-AOC | ₹42.0 L+₹1.6 L (4.06%) | 2 | Rejected-AOC OTHER THAN L1 BIDDER |
| 3 | 3₹42.2 L+₹1.8 L (4.49%)Rejected-AOC PO BIRPARA DIST JALPAIGURI PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | ₹42.2 L+₹1.8 L (4.49%) | 3 | Rejected-AOC OTHER THAN L1 BIDDER |
| 4 | 4₹42.6 L+₹2.2 L (5.33%)Rejected-AOC BIRPARA PO BIRPARA DIST JALPAIGURI W B PIN 735204 | ALIPURDUAR | WEST BENGAL | 735204 | ₹42.6 L+₹2.2 L (5.33%) | 4 | Rejected-AOC OTHER THAN L1 BIDDER |
| 5 | 5₹42.8 L+₹2.4 L (5.99%)Rejected-AOC POST BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | ₹42.8 L+₹2.4 L (5.99%) | 5 | Rejected-AOC OTHER THAN L1 BIDDER |
| Sl No | Description | Qty | Unit | M/S NAV BHARAT TRADING CO. L4 | CENTRAL ENGINEERING WORKS L3 | Biswanath Sharma L8 | M/S East India Traders L5 | M/S DELTA ENGINEERS & CO L7 | M/S PAWAN ENTERPRISE L2 | S.N. GHOSH AND CO. L1 | M/S SHYAM ENTERPRISE L11 | ANUP ENGINEERING WORKS L10 | ROZI KHAN L9 | M/s D J Ghosh L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Sunken Flooring.
M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:-
(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces. (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron thick) measured dry on dry surface over a coat of PU primer including preparation. | 20 | Sqm | 1,900 ₹38,000 | 2,000 ₹40,000 | 1,850 ₹37,000 | 1,920 ₹38,400 | 1,835 ₹36,700 | 1,800 ₹36,000 Lowest | 1,800 ₹36,000 Lowest | 2,155 ₹43,100 | 1,950 ₹39,000 | 1,950 ₹39,000 | 1,880 ₹37,600 |
| 1.01Item No. 1.00 contd... (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout, to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists. (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate. | ||||||||||||||
| 2.00 | S&F in repairs vitreous china wash down water closet pan (Eeuropean type), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet flush pipe fixed complete jointing connecting and making good the disturbed complete all as specified. | 10 | Each | 3,500 ₹35,000 | 3,500 ₹35,000 | 3,450 ₹34,500 | 3,440 ₹34,400 | 3,400 ₹34,000 | 3,350 ₹33,500 Lowest | 3,400 ₹34,000 | 3,810 ₹38,100 | 3,350 ₹33,500 Lowest | 3,450 ₹34,500 | 3,480 ₹34,800 |
| 3.00 | S&F in repair vitreous china squating pan, 'Orissa' Pattern, size 580 x 440 mm white, with integral foot rests, including connections to trap, and to flushing pipe, anti-syphonage pipe etc. complete all as specified. | 12 | Each | 2,800 ₹33,600 | 2,950 ₹35,400 | 2,900 ₹34,800 | 2,880 ₹34,560 | 2,800 ₹33,600 | 2,750 ₹33,000 Lowest | 2,750 ₹33,000 Lowest | 3,405 ₹40,860 | 2,875 ₹34,500 | 2,800 ₹33,600 | 2,920 ₹35,040 |
| 4.00 | Removing existing water proofing treatment to complete any descrption, thickness and in any position including removal of rubbish of the premises etc complete all as directed. | 500 | Sqm | 55 ₹27,500 Lowest | 60 ₹30,000 | 57 ₹28,500 | 61 ₹30,500 | 55 ₹27,500 Lowest | 59 ₹29,500 | 55 ₹27,500 Lowest | 83 ₹41,500 | 59 ₹29,500 | 58 ₹29,000 | 63 ₹31,500 |
| 5.00 | M&L for water proofing treatment to RCC roof slab as specified below:-
(a) 10 mm thick cement plaster in CM 1:3 with integral WPC to be laid over the RCC roof slab when the concrete is green.
(b) Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster.
(c) 4 mm thick plain texture and weighing not less than 4.00 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturers instructions. M/s Fosroc Chemicals “Proofex Torchseal 3PI/4PI/Antiroot Plain” or M/s STP Limited “Super Thermolay APP PL/MT/Superior Shaliplus/industrial bitumen, ShaliTex Primer” or M/s Sika India Pvt Ltd “Sika WP Shield 103P/PM / Sika WP Shield 104P/PM) or equivalent make as approved by GE.
(d) Apply two coats of bitumastic - aluminium paint over the membrane. | 500 | Sqm | 1,225 ₹6,12,500 | 1,300 ₹6,50,000 | 1,300 ₹6,50,000 | 1,290 ₹6,45,000 | 1,315 ₹6,57,500 | 1,300 ₹6,50,000 | 1,220 ₹6,10,000 Lowest | 1,405 ₹7,02,500 | 1,370 ₹6,85,000 | 1,250 ₹6,25,000 | 1,260 ₹6,30,000 |
| 6.00 | M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in roof to achieve slope on existing roof surface complete all as specified. | 500 | Sqm | 280 ₹1,40,000 | 260 ₹1,30,000 | 250 ₹1,25,000 Lowest | 250 ₹1,25,000 Lowest | 270 ₹1,35,000 | 260 ₹1,30,000 | 250 ₹1,25,000 Lowest | 355 ₹1,77,500 | 315 ₹1,57,500 | 270 ₹1,35,000 | 300 ₹1,50,000 |
| 7.00 | M&L for cutting out cracks to 'V' section (shape) in existing roof slab terracing cleaning out and filling solidely with cement and sand mortar (1:1) complete all as specified. | 10 | RM | 78 ₹780 | 80 ₹800 | 80 ₹800 | 84 ₹840 | 83 ₹830 | 85 ₹850 | 78 ₹780 | 93 ₹930 | 83 ₹830 | 77 ₹770 Lowest | 85 ₹850 |
| 8.00 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A'). | 0.5 | Cum | 6,900 ₹3,450 Lowest | 7,500 ₹3,750 | 7,350 ₹3,675 | 7,400 ₹3,700 | 7,200 ₹3,600 | 6,950 ₹3,475 | 7,000 ₹3,500 | 7,503 ₹3,751.5 | 7,100 ₹3,550 | 7,700 ₹3,850 | 7,500 ₹3,750 |
| 9.00 | Dismantling floor, hearth or wall tiling of any description, size and thickness including cement mortor bedding, removing rubbish off the premises etc complete all as specified. | 812 | Sqm | 48 ₹38,976 | 50 ₹40,600 | 51 ₹41,412 | 45 ₹36,540 Lowest | 47 ₹38,164 | 50 ₹40,600 | 45 ₹36,540 Lowest | 61 ₹49,532 | 54 ₹43,848 | 48 ₹38,976 | 53 ₹43,036 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
8 Dec 2025, 6:00 pmClosed
GE (S) Binnaguri
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
As per tender docus
2025_MES_739920_1
8836/E8
Open Tender
Civil Works
Item Rate
180 days
GE (S) Binnaguri
Class D and Category a(i)
7 documents required · 7 mandatory
₹500
GE (S) Binnaguri
₹80,000
Yes
31 Jan 2026
17 Nov 2025
15 Dec 2025
17 Nov 2025
8 Dec 2025
1 Dec 2025
17 Nov 2025 - 1 Dec 2025
Amount
Sunken Flooring. M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:- (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces. (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron thick) measured dry on dry surface over a coat of PU primer including preparation.
Item No. 1.00 contd... (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout, to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists. (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate.
S&F in repairs vitreous china wash down water closet pan (Eeuropean type), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet flush pipe fixed complete jointing connecting and making good the disturbed complete all as specified.
S&F in repair vitreous china squating pan, 'Orissa' Pattern, size 580 x 440 mm white, with integral foot rests, including connections to trap, and to flushing pipe, anti-syphonage pipe etc. complete all as specified.
Removing existing water proofing treatment to complete any descrption, thickness and in any position including removal of rubbish of the premises etc complete all as directed.
M&L for water proofing treatment to RCC roof slab as specified below:- (a) 10 mm thick cement plaster in CM 1:3 with integral WPC to be laid over the RCC roof slab when the concrete is green. (b) Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster. (c) 4 mm thick plain texture and weighing not less than 4.00 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturers instructions. M/s Fosroc Chemicals “Proofex Torchseal 3PI/4PI/Antiroot Plain” or M/s STP Limited “Super Thermolay APP PL/MT/Superior Shaliplus/industrial bitumen, ShaliTex Primer” or M/s Sika India Pvt Ltd “Sika WP Shield 103P/PM / Sika WP Shield 104P/PM) or equivalent make as approved by GE. (d) Apply two coats of bitumastic - aluminium paint over the membrane.
M&L for cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in roof to achieve slope on existing roof surface complete all as specified.
M&L for cutting out cracks to 'V' section (shape) in existing roof slab terracing cleaning out and filling solidely with cement and sand mortar (1:1) complete all as specified.
M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A').
Dismantling floor, hearth or wall tiling of any description, size and thickness including cement mortor bedding, removing rubbish off the premises etc complete all as specified.
M&L for glazed ceramic coloured joint free tiles in vertical surface 450x300x7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified.
M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified.
Ditto all as per serial item No. 11.00 described here-in-before but as in skirting over 10mm thick backing coat in CM 1:4 complete all as specified.
M&L for Non-skid Ceramic tiles 8 mm thick (square/rectingular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified.
Ditto all as per serial item No. 13.00 described here-in-before but as in skirting over 10mm thick backing coat in CM 1:4 complete all as specified.
Taking down chowkats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each complete all as specified.
Taking down chowkats or frame with shutter (without taking off shutters from the frame) n. exe 1.5 sqm each complete all as specified.
S&F pressed steel frames of size 125x60mm, (minimum 1 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including finishes of disterub surfaces of wall etc. complete all as specified.
S&F pressed steel frames of size 105x60mm, (minimum 1 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including finishes of disterub surfaces of wall etc. complete all as specified.
M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in holdfast block, coping, bedblock etc. complete all as specified.
S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified.
S&F 30mm thick glazed and skeleton shutters (2nd class hard wood) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.
S&F aluminium anodized barrel tower bolts, extruded section 150mm long complete all as specified.
S&F aluminium anodized handles, D type, 150mm size complete all as specified.
S&F stainless steel butt hinges medium weight 100mm size for PVC door complete all as specified.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified.
S&F stainless steel butt hinges medium weight 150mm size for wooden door complete all as specified.
S&F aluminium anodized barrel tower bolts, extruded section 200mm long complete all as specified.
Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified.
Taking up or down GI 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified.
S&F 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
Refixing old 15mm bore GI tubing and connections on new or old position (walls, ceilling, floor etc) but including with new fittings complete all as specified.
S&F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
Refixing old 20mm bore GI tubing and connections on new or old position (walls, ceilling, floor etc) but including with new fittings complete all as specified.
S&F in repairs powder coated aluminium alloy curtain rails 25mm dia fixed to required lenghts etc complete all as specified.
S&F in repairs brass chromium plated curtain rail brackets fancy type for 20mm dia curtain rails etc complete all as specified.
Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified.
M&L for 5mm thick rendering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete all as specified.
M&L for 15mm thick rendering in cement mortar (1:6) on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified.
M&L for 20 mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified.
Supply only liquid water proofing compound complete all as specified. (Make : CICO No- 1/SIKA/ACCO PROOF).
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.
M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified.
M&L for preparation on new plastered surfaces of wall and applying two coats of exterior grade weather coat paint over a coat of primer complete all as specified.
M&L for preparation of old plastered surfaces and applying one coat of exterior grade weather coat paint complete all as specified.
M&L for preparation of old plastered surfaces and applying one coat of oil bound distemper on walls complete all as specified.
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Dismantling and breaking up 100mm drain pipe (salt glazed stone ware or reinforced concrete) set in cement mortar alongwith concrete bed of drain pipes as in damaged portion of sewage line and work in foul position complete all as specified.
Dismantling and breaking up 150 mm drain pipe (salt glazed stone ware or reinforced concrete) set in cement mortar alongwith concrete bed of drain pipes as in damaged portion of sewage line and work in foul position complete all as specified.
M&L for 100mm thick cement concrete bed to drain pipe (100mm bore) with PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified.
Ditto all as per serial item No. 53.00 described here-in-before but bore of drain pipe 150mm
M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 100mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified.
M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 150mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified.
S&F in repairs 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls etc complete all as specified.
S&F in repairs 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as specified.
S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified.
S&F in repairs 110mm bore PVC (SWR) bends with acess door complete all as specified.
S&F in repairs 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as specified.
S&F in repairs 110mm bore of pipe PVC (SWR) vent cowl etc complete all as specified.
S&F in repairs 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified.
S&F in repairs 15mm bore fancy type Bib taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified.
S&F in repairs 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified.
S&F in repairs 15mm bore Stop valves, cast copper alloy fancy type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified.
S&F in repairs 15mm bore fancy type brass chromium plated wall mixer 3-in-1 system with and including both telephone shower and overhead shower complete with wall flange, 115mm long bend pipe, shower arm 190mm long heavy casted body with wall flange and pressure adjustable shower with revolving joint of approved series of make or equivalent of Marc etc complete all as specified.
S&F in repairs glass shelf of size 600x125mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc complete all as specified.
S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified.
S&F in repairs fancy type Brass chromium plated 600mm long, 20mm dia, towel rod fixed with screws and wooden/plastic cleats etc complete all as specified.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified.
S&F in repairs glazed earthen ware viterous china wash basin oval shaped white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as specified.
S&F in repairs toilet paper holder, vitreous China, box type white coloured fixed to walls with chromium plated (CP) brass screws etc complete all as specified.
S&F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as specified.
S&F in repairs mirrors of size 450mm x 600mm with aluminium powder coated frame in handle section fixed with rubber gaskets and fixed to brick/stone masonry walls built in cement mortor etc complete all as specified.
S&F in repairs brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc complete all as specified.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified.
M&L for brickwork with burnt fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) etc complete all as specified.
M&L for brickwork with burnt flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in, built in CM (1:4) etc complete all as specified.
SS&F in repairs 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR Part I complete all as specified.
S&F in repairs 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR Part I with and including 25mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified.
Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified.
M&L for etc cleaning & removing all scale and dirt etc from tanks from mouth of circulating pipe (tank capacity exc 250 n exc 500 lit) including necessary required T & P etc complete all as specified.
M&L for etc cleaning & removing all scale and dirt etc from tanks from mouth of circulating pipe (tank capacity exc 500 n exc 1000 lit ) including necessary required T & P etc complete all as specified.
S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified.. (Make : PRAYAG or equivalent make as specified).
M/S PAWAN ENTERPRISE (BID ID -3489914)
CENTRAL ENGINEERING WORKS (BID ID -3488200)
M/S NAV BHARAT TRADING CO. (BID ID -3487490)
M/S East India Traders (BID ID -3488964)
M/s D J Ghosh (BID ID -3491445)
M/S DELTA ENGINEERS & CO (BID ID -3489245)
Biswanath Sharma (BID ID -3488866)
ROZI KHAN (BID ID -3488137)
ANUP ENGINEERING WORKS (BID ID -3489511)
M/S SHYAM ENTERPRISE (BID ID -3488992)
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tenderdocus8836.rar
Tender Documents • 1.74 MB
BOQ_828510.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .