P/L PCC path culvert, R/wall breast wall, grating etc in ward No. 15

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres Pick jumper work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Flat surfaces such as soffits and suspended floors,roofs landing and the like:Floors etc. upto 200mm in thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Edges of slabs and breaks in floors and walls: Under 20 cm. wide including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying Mechanically mixed and vibrated cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying mechanically mixed & vibrated cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel Detail of cost for one cubic metre including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floortwo level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up In gratings framed guard bars,ladders, railling, brackets and similar works. sections,trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying 100mm dia PVC pipe weep holes as per HPPWD specification complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Raj Kumar

hitender singh

Tilak Raj

Kapil Sharma

anuj gupta