Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Fourwheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in All Talukas of Surat District for One Year.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with

latest amendment and 32 mm NB ISI marked medium duty GI Pipe in All Talukas of Surat

District for One Year.

Executive Engineer,

Public Health Mechanical Division,

2nd Floor, Jal Bhavan, Gujarat Gas Circle, Adajan-395009

Gujarat Water Supply & Sewerage Board,

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in All Talukas of

Surat District for One Year.

Schedule showing the material to be supplied from the store of GWSSB for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. RateRs. UnitDeliv Place of

No. ery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled material

at the rate of current SOR from contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in All Talukas of

Surat District for One Year.

Particulars Qty. Unit Amount Rs.

Providing light commercial (medium) four wheeler Diesel vehicle

on rental basis for one day (particularly for H.P repairing works)

1 with Driver & POL(Per day) (The vehicle shall be fully insured with 28 99242

fitness certificate & PUC) with 01 Semi skilled Labour (Per day) &

03 Unskilled Labour (Per day) for year.

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M- 2786

12x1.75 & Washer 4mm thick

Hex. Bolt M10x1.50x40 mm long 94

Nylock Nut M10x1.50 94

Handle Axle(Stainless Steel) 172

Washer (4 mm thick) for Handle Axle 172

Bearing (No.6204-Z) 349

Spacer(for pump Head) 35

Chain with Coupling 460

Bolt for front cover M-12x20 mm long 7

A- Pump Head Assly.Consi.of Item No.(1) to (7) as per Fig.3.1 35

SPARES FOR CYLINDER

Pump Bucket 2270

Sealing Ring 2205

Upper Valve Assly comp. consi.of item as per fig 3.6 A (Part 63

Lower Valve Asslycomp.consi.of item as per fig 3.6 B (Part 80

WATER TANK consi.of item as per fig 3.6 B (1 to 6) 59

Cylinder With Brass Liner consi.of item (a) & (b) 115

Volume III: Price bid Page

Spares for Conne. Rods

Hexagonal Coupler M-12 x 1.75 x 50mm 10

UPPER VALVE ASSEMBLY SPARES

Upper Valve Seating 833

Plunger Yoke Body 3

Bucket Spacer 105

Plunger Rod (S & S) 23

Upper Valve (Guide) 33

LOWER VALVE ASSEMBLY SPARES

Check Valve Seat 10

Check Valve Seating 10

Rubber Seat Retainer 10

Handle Bar consisting of Item no (1) & (3) as per Fig 4.6 40

Cylinder AsslyComp.consisting of Item no (1) to (7) as per 105

Conn. Rod Electro Galva.consisting of Item no (1) to (3) as 1293

Special Tool Kit for I. M.-II HandpumpConsi. Item (1) to (11) 0

(L) as per IS 15500 Part-8 with tool box 6249.60 Set

Standerd Tool Kit for I. M.-II HandpumpConsi. Item(1) to 0

(M) (16) as per IS 15500Part-8 with tool box 6340.32 Set

Third plate consisting of Item (1) & (2) as per fig 4.5 0

Spares for deep well Hand pump-Extra Deep

Cylinder Body with Brass Liner consisting of Item no (1) for 0

O-1 body fig 5.2 & (2) for brass linear Fig 6.1 B 525.60 Set

Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0

Upper Valve Assembly complete consisting of Item no (1) 0 570.00 Set

to (11) as per Fig

Volume III: Price bid Page

Follower as per Fig 6.7 0

Bucket Spacer-Lower as per Fig 6.5 0

Pedestral of Telescopic Stand Assembly 5

Manufacture Supply & Delivery of ISI Marked 32 mm dia medium

quality galvanized mild steel tubes (Continuously welded electric

resistance welded (ERW)/high frequency induction weled (HFIW)

/Hot finished welded (HFW) type screwed at both ends to IS:554/

3 1985 for pipe suitable for water and gas application, socket on 3143 Mtr.

one end and other end protected with plastic thread protector in

approximate length of 3 mtrs conforming to IS:1239 (Part-I)

With latest amendment and socket to conforming to IS:1239

(Part-II) 1992 With latest amendment

Total Cost for one year

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special

Condition of the Volume II (Technical Bid).

3. Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 4074076.87 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Executive Engineer,

Signature of Contractor P.H. Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in all Talukas of Surat District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page