S.S. Hex. head screw

Special Eligibility Criteria

1. 1

   (1) Bulk purchase [minimum 80 percent of net procurement quantity] will be made only from OEM as per TVS/DFL/UNBRAKO/ LPS/TUFF (or) their authorized representative with Tender Specific Authorization. Authorized dealers shall attach Tender Specific Authorization along with the offer, failing which the offer shall be summarily rejected. (2) In this case where the procurement has been restricted to specific brands, the offers from firms offering tendered item in equivalent brands can be accepted for a developmental order of up to 20% of Net Procurable Quantity against the tender. For consideration of the offers for such developmental order, the tenderer must submit proof of past performance with railways for the brand quoted as evidence for the quality for the product (brand) offered. Past performance means satisfactory execution of contracts to SC Railway, or Other Zonal Railways/Pus for supply of the same or similar item for a quantity of 20 percent or more of tendered quantity against a single contract during the last three years prior to and excluding tender opening date. Proof of past performance means copies of R Notes/CRAC/CRN/Proof of acceptance of material by consignee. (3) In case, the tenderer participates as an authorized dealer, then the performance as required above shall be that of Principal (OEM) authorizing the agent or bidder for the same OEM. It may so happen that the agent/dealer has credentials of past supply for a different Principal/OEM, then it will not be considered as performance. For Authorized dealers, tender specific authorization from OEM has to be uploaded with bid. (4) For detailed instructions refer, GENERAL TENDER CONDITIONS attached with NIT and/or available as Public Document on IREPS website Goods and Services/South Central Railway.

   Document requiredConfirmation required
2. 2

   Offers received without make/brands or with vague mentions like "0", NIL, "as per tender" etc will be rejected. Participating firms should mention their offered Make/Brand against tendered item in the corresponding Make/Brand column without fail. Ambiguity in the form of offering multiple Make/Brand (or) not mentioning Make/Brand will be treated as disadvantage to the bidder and such offer are liable to be rejected.

   Confirmation required
3. 3

   A) In Keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. B) Provisions of latest Rly Bd letter regarding Public Procurement (Preference to Make in India), Order 2017 - Revision vide Lr. No. 2020/RS(G)/779/2/Pt.1(E3322671) dt 20.08.2024 are applicable.

   Confirmation required

Check List

1. 1

   Have you gone through the Instruction to tenderers and General Tender Conditions, etc., uploaded in IREPS by this Railway Having participated in the tender it will be considered that you have gone through all the conditions and the same are accepted by you.
2. 2

   Have you agreed to supply the tendered stores at the rates quoted by you in accordance with the IRS conditions of contract and in accordance with special and other conditions specified / attached with the tender.
3. 3

   Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you.Any variation in tax structure/rate due to introduction of ST, shall be dealt with under Statutory Variation Clause
4. 4

   Have you ensured that you have not quoted/uploaded any commercial /technical deviations/financial term in place other than specified in the tender enquiry as the same will not be considered and will be ignored. Any contract placed after ignoring such financial / commercial terms at the place other than the specified in tender enquiry will be binding on you.
5. 5

   Please go through SCR Instructions to Tenderers and General Conditions of Tender on IREPS website which are applicable, before submission of offer.

Commercial-Compliance

1. 1

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non-MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Document optionalConfirmation required
2. 2

   The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email id).

   Document optionalConfirmation required
3. 3

   Guarantee/ warranty shall be as per governing specification. If there is no governing specs or nothing is specified in Governing Specs then warranty Guarantee will be as per IRS conditions of contract.

   Confirmation required
4. 4

   Each tenderer should clearly specify essential technical and commercial parameters in a transparent manner. No deviation to such Essential Technical &Commercial conditions shall be permitted to the vendors in the electronic bid form. Offers with deviations in respect of any condition for responsiveness of offer shall be declared as Ineligible for award of contract.

   Confirmation required
5. 5

   If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise [in percent of order value] with further breakup of MSE owned by SC/ST. [Information will be provided in percentage terms with 6 fields, Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others].

   Document optionalConfirmation required
6. 6

   This tender complies with public procurement policy (make in India)order 2017, revised date 16- 09-2017, issued by department of Industrial promotion and policy, Ministry of commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/2/Pt.1 dated 25.09.2020.

   Confirmation required
7. 7

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optionalConfirmation required
8. 8

   The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] Special Conditions and [or] other Conditions specified/attached with the tender.

   Document optionalConfirmation required
9. 9

   l/we hereby understand and accept that if l/ we withdraw or modify my/ our bids during the period of validity, or if l/ we are awarded the contract and on being called upon to submit the performance security/ Security Deposit, fail to submit the performance security/ Security Deposit before the deadline defined in the request for bid document/ Notice Inviting Tender, l/ we shall be debarred from exemption of submitting Bid Security/ Earnest Money Deposit and performance security/ Security Deposit for a period of 6 (six)months, from the date l/ we are declared disqualified from exemption from submission of EMD/SD, for all tenders for procurement of goods issued by any unit of Indian Railways published during this period.

   Document requiredConfirmation required
10. 10

    Failure consequences: In case the firm fails to execute the contract within the original delivery period, the purchaser will be entitled to impose liquidated damages for extension of delivery period. For any reason, if the supplier fails to supply goods as per the conditions of contract, as amended from time to time, Purchaser shall have the right to levy damages from the supplier for failing to comply with the contractual conditions, not by the way of penalty, an amount equal to 5% of the defaulted order amount. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly.
11. 11

    Offer should be valid for 120 days.
12. 12

    Price Variation Clause is not applicable for this tender.
13. 13

    Force majeure clause is applicable.
14. 14

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received f o r quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.