Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.2 L
Closing Date
4 Sept 2026, 9:30 pm7d left
Karnataka Industrial Areas Development Board
Technical Assistant-2
08022265383
Formation of 15m wide road, formation of Bellmouth from NH-69 to Nagadiyath Kaval Industrial Area, Construction of Storm Water Drain, Construction of Road Crossing, Providing and laying of PSC pipes, providing and laying water supply distribution pipe line and supply, erection, electrification and commissioning of 5HP and 7.5HP submersible pumpsets with allied accessories for newly drilled borewell at Nagadiyath Kaval Industrial Area, Kadur Taluk, Chikkamagaluru District.
KIADB/2026-27/OW/WORK_INDENT490
KIADB/2026-27/OW/WORK_INDENT490
Open
Other Works
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). Satisfactory completed (at least 90% of the contract value), as prime contractor, at least One Similar Work such as, Improvement/ Reconstruction/ Upgradation of Roads including construction of RCC storm water drain, providing and laying Pipeline along with submersible pumpsets works, as per the scope work, of value not less than Rs.107.00 lakhs.
Executed in any one financial year, the following minimum quantities of work: (Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/Government Undertaking Organizations). (1)Earthwork Excavation / Earthwork Embankment/ Earthwork for Subgrade: 6971 Cum, (2) Granular Sub Base/ Wet Mix Macadam: 1478 Cum, (3) BM/DBM/BC/SDBC: 244 Cum, (4) PCC/RCC: 474 Cum, (5) TMT Steel Reinforcement: 25 Tonne
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 05 Months.
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). Achieved in at least two financial years a minimum financial turnover of Rs.428.00 Lakhs. (Civil Contract Works Only) (Not less than 2 times the amount put to tender)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.64.00 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
₹5,000
₹3.2 L
20 Aug 2026
20 Aug 2026
5 Sept 2026
27 Aug 2026
27 Aug 2026
Formation of 15m wide road, formation of Bellmouth from NH-69 to Nagadiyath Kaval Industrial Area, Construction of Storm Water Drain, Construction of Road Crossing, Providing and laying of PSC pipes, providing and laying water supply distribution pipe line and supply, erection, electrification and commissioning of 5HP and 7.5HP submersible pumpsets with allied accessories for newly drilled borewell at Nagadiyath Kaval Industrial Area, Kadur Taluk, Chikkamagaluru District.
Part A : Formation of road Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and...
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per d...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction with complete with...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriag...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Dense Graded Bituminous Macadam Grading - II for traffic greater than 20 MSA Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of speci...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface with complete with all lead and lift etc, as per specifi...
Bituminous Concrete Grading II for traffic greater than 20 MSAProviding and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound2.5 mm thick including reflectorisin...
Part B: Formation of Drain Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of so...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjac...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slop...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Part C: Construction Of storm Water Drain Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjac...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slop...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Part D: Construction of Road Crossing Deck Slabs Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjac...
Back filling behind abutment, wing wall and return wallcomplete including compaction as per drawing and TechnicalSpecification- A. Granular material with complete with all lead and lift etc, as per s...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slop...
Part E: Providing And laying RCC Pipes with Head Walls Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical spec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding jo...
Back filling behind abutment, wing wall and return wallcomplete including compaction as per drawing and TechnicalSpecification- A. Granular material complete with all lead and lift etc, as per specifi...
Part F: Providing and Laying of Water Supply Distribution Pipeline Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and te...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gr...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Nagadiyath Kaval Bid document.pdf
Tender Document • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].