Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC HIMACHAL PRADESH HP | L1 | Accepted-AOC accept | |
| 2 | L2₹1.7 L+₹14,256 (9.41%)Rejected-Finance | L2 | Rejected-Finance reject | |
| 3 | L3₹1.9 L+₹36,130.60 (23.8%)Rejected-Finance S O SH PURAN CHAND VILLAGE BAI NAL P O KAMAND SUB TEHSIL KATAULA DISTT MANDI H P | MANDI | HIMACHAL PRADESH | 175001 | L3 | Rejected-Finance reject | |
| 4 | L4₹1.9 L+₹40,751.20 (26.9%)Rejected-Finance CHANDRONA TEHSIL NOHRADHAR DISTRICT SIRMOUR H P | L4 | Rejected-Finance reject |
| Sl No | Description | Qty | Unit | SHANKAR DASS L2 | M/S ASHOK KUMAR L4 | AJAY KUMAR L1 | DUNI CHAND L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts. (Pick Jumper work) | 172.8 | cum | 283 ₹48,902.4 | 337 ₹58,233.6 | 273 ₹47,174.4 Lowest | 350 ₹60,480 |
| 2.00Laying, Jointing and testing of bevelled ended GI pipe with circumferntial butt welded joints wherever required by electrical arc welding (welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of following dia meters conforming to IS: 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers/tapers, all short piece, bends etc. as per site requirement made from parent tubes. The laying of pipe shall also include welding of flanged joints of every xviith pipe duly welded in three layers (two inner one outer) and all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt welding, lowering, and laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-Charge (Earth work in the trenches and the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/L&T of ISI marked make. The damaged portion of the pipes (if damaged during laying and jointing operation of pipe) and all other special made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifactions C-203-1978. The rates also includes entire carriage of material, flushing , cleaning and hydraulic testing of pipes. D.P test of butt welded joints complete in all respect and to the best satisfaction and direciton of Engineer-in-Charge within all leads and lifts. | |||||||
| 3.00 | 65mm dia (P/E) (Labour Rate). | 1,200 | Rmt | 93 ₹1,11,600 | 97 ₹1,16,400 | 83 ₹99,600 Lowest | 105 ₹1,26,000 |
| 4.00Providing and fixing MS Flanges (in pair) for the joint of following dia and same shell confirm to BIS 6392-1971. (Latest with up to date ammendments) including the cost of welding in three layers (two inner & one outer) nuts and bolts of required sizes 3mm thick compressed asbestos fiber/synthetic rubber gasket cofirming to revelent BIS standard and it shell also includes carrige of materials with all leads and lifts complete in all respect as per best satisfaction and direction of Engineer in Charge. | |||||||
| 5.00 | GI pipe 65mm dia flange Table-5 | 11 | Pair | 483 ₹5,313 | 1,607 ₹17,677 | 435 ₹4,785 | 110 ₹1,210 Lowest |
Tender Value
₹2.2 L
EMD Value
₹4,307
Closing Date
21 Jun 2025, 11:00 amClosed
EE
Jal Shakti Division Jawalamukhi
Laying jointing and testing of rising main line GI pipe
2025_HPIPH_107329_1
JAM-KNG02-742
Open Tender
Civil Works
Item Rate
90 days
Jawalamukhi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE Jawalamukhi
₹4,307
5 Sept 2025
10 Jun 2025
21 Jun 2025
10 Jun 2025
21 Jun 2025
10 Jun 2025
Amount
Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts. (Pick Jumper work)
Laying, Jointing and testing of bevelled ended GI pipe with circumferntial butt welded joints wherever required by electrical arc welding (welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of following dia meters conforming to IS: 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers/tapers, all short piece, bends etc. as per site requirement made from parent tubes. The laying of pipe shall also include welding of flanged joints of every xviith pipe duly welded in three layers (two inner one outer) and all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt welding, lowering, and laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-Charge (Earth work in the trenches and the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/L&T of ISI marked make. The damaged portion of the pipes (if damaged during laying and jointing operation of pipe) and all other special made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifactions C-203-1978. The rates also includes entire carriage of material, flushing , cleaning and hydraulic testing of pipes. D.P test of butt welded joints complete in all respect and to the best satisfaction and direciton of Engineer-in-Charge within all leads and lifts.
65mm dia (P/E) (Labour Rate).
Providing and fixing MS Flanges (in pair) for the joint of following dia and same shell confirm to BIS 6392-1971. (Latest with up to date ammendments) including the cost of welding in three layers (two inner & one outer) nuts and bolts of required sizes 3mm thick compressed asbestos fiber/synthetic rubber gasket cofirming to revelent BIS standard and it shell also includes carrige of materials with all leads and lifts complete in all respect as per best satisfaction and direction of Engineer in Charge.
GI pipe 65mm dia flange Table-5
SHANKAR DASS (BID ID -526968)
DUNI CHAND (BID ID -526823)
M/S ASHOK KUMAR (BID ID -526202)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .