Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC | L1 | Accepted-AOC Being 1st Lowest | |
| 2 | L2₹48.6 L+₹2.5 L (5.43%)Rejected-Finance | L2 | Rejected-Finance Being 2nd Lowest |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
PROVN OF STORAGE ACCN AT BSO FURNITURE YARD AND CERTAIN REV AND MINOR WORKS UNDER GE (EAST) BAREILLY.
2023_MES_614806_1
8285/E8
Open Tender
Civil Works
Item Rate
245 days
BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE EAST BAREILLY
₹99,600
Yes
26 Oct 2023
21 Aug 2023
25 Sept 2023
21 Aug 2023
23 Sept 2023
4 Sept 2023
21 Aug 2023 - 28 Aug 2023
Amount
Surface dressing n exc 15 cm deep complete all as specified and directed.
M&L rough excavation not exceeding 1.5 m deep and getting out hard/ dense soil complete all as spd and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.
Excavation in post hole each not exceeding 0.5 cum getting out in hard/dense soil and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
M & L for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for cement concrete 1:4:8, type D 2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete. complete all as specified and as directed.
M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte on rough finished flat surface of concrete complete all as specified and as directed.
M & L for Reinforced cement concrete (Design Mix) with M-25 using 20 mm graded aggregates as in Columns, pillars, piers, posts and struts.complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished flat surface of concrete. complete all as specified and as directed.
M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in slab complete all as specified and as directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, wall of mangers etc. complete all as specified and as directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified.
S&F mild steel TMT bars of 8 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
All as per Srl item No. 16 here in before but upto 8 mm dia as in stirrups , spacers and binders.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, vertical post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E-250) quality-A complete all as specified and as directed.
S&F Hand rails, half round or other mild steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F steel work in tubular trusses of design as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade) complete all as specified and as directed.
S&F Framed work such as choukats grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 5 cm but n.exc 10 cm long, dia of shank 5 to 10 mm complete all as specified and as directed.
M & L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 6 mtr height . complete all as specified and as directed.
All as per Srl item No. 23 here in before but in ridges of same profile and minimun girth 750mm
M&L for brick work with fly ash bricks old size bricks in cement mortar, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified as directed
M&L for 15 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick cement plaster in CM 1:4 on brick surface finished even and smooth without using extra cement complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering cement complete all as specified and directed.
M&L hardcore of gouge n exc n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for cement concrete 1:4:8, type D-2 (usng 40 mm graded broken stone aggregate) 75 mm thick as sub base complete all as specified and directed.
M&L for PCC 1:1½:3 , type B1 (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.
M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A cement complete all as specified and directed.
S&F Welded steeel wire fabric to steel member exc 4kg per sqm complete all as specied and directed.
M&L for two coat of OBD with preparing newly plastered walls surfaces with airless electric sprayers over a coat of primer applied using airless electric spryers over two coat of wall care putty of 1mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through authorised applicator of manufacturer complete all as specified and directed.
Material and labour Material for applying two coats of cement base paint on newly platered surface by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with max material hose length 30 mtr. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturerand accessories for applying cement base paint should be able to spray in hard to reach areas and penetration of cement base paint on the surface to achive excllent application using limited manpower complete all as specified and directed.
Returning, filling in, including spreading, leveling, and well ramming in layers n. exc. 25 cm thickness in soil complete all as specified and as directed.
Removing excavated material (Soils) to distance of exc. 250 m bu n. exc. 500 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.
M&L factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 100 mm thickness M-50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
M & L two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel complete all as specified and as directed.
M & L for cement concrete type C1 (1:3:6) (20 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair all as directed.
M&L Brick work with Fly ash bricks, straight or curved on plan any radius, in half brick wall built in CM (1:4) complete all as specified and as directed.
S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Coldwith long screwed shanks and flynuts, screwed for iron pipe and fixed of Complete all as specified and as directed.
S&F Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts, of length 600mm complete all as specified and as directed.
S&F bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule of complete all as specified and as directed.
S&F CP two way bib cock 15mm bore with and including Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.
S&F Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed.
S & F soap dish stainless steel as approved by GE complete all as specified and as directed.
S & F viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting and 32 mm PVC waste pipe complete all as specified and as directed.
S & F vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and as directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe complete all as specified and as directed.
S&F 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete all as specified and as directed.
M & L for 75 mm, dia PVC (SWR) floor trap, plain with SS grating including jointing with solvent cement. complete all as specified and as directed by Engineer-In-Charge (Trap shall be sealed properly with the existing pipe and got tested by Filling with water)
Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin complete all as specified and as directed.
Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.
S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia complete all as specified and as directed.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.
S& F PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps complete all as specified and as directed.
S&F PVC (SWR) bends 75mm dia complete all as specified and as directed.
S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc complete all as specified and as directed.
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and as directed.
S&F in 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated building including necessary complete all as specified and as directed.
S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed.
S & F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core compete all as specified as directed.
S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed.
S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed.
S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed.
M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified
M & L 25 mm thick PCC 1:2:4 type B-1, using 12.50 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone including weathering, slightly rounded or chemferred angles and throating as directed edges complete including excavavtion for kerb stone as directed.
Dismantling Asbestos cement /FRP sheet/GI sheet (corrugated ted, semi corrugated, etc.) sheets in roof coverings up to height 8mtr all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish. Complete all as specified and as directed.
Dismantling floor tiling /paving block including cement mortar bedding (but not backing), all as directed.Complete all as specified and as directed.
M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as specified and as directed.
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
One 5A flush type socket point on same board board
One 5A flush type switch socket point on independent board
All as per Srl item No.70 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.
S&F Switch Piano flush type single pole one way 15 Amps Complete all as specified & as directed.
S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type.s Complete all as specified & as directed.
S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amps Complete all as specified & as directed.
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
S & F Lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 Volts,7/9 Wattcomplete all as specified and directed.
S & F in repairs LED light fittings 20 Watt ( T-8 ), 4' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving , surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
S &F LED building security light fitting 25 Watt LED 230 Volts, AC outdoor type new generation with energy saving and environmental friendly long life made up of high pressure die cast aluminium housing with hight efficiency LED as lighting source and lens embedded and heat resistant polycarbonate cover having bottom opending seperate driver component with IP 66 protetection and impact resistant of IK07 complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F Exhaust fan, steel body AC single of size 380 mm sweep havey duty with blades and frame and complete with louvers shutter, voltage 230 Volts, 50 Hz RPM 1200, copper winding including electric connection with three core flexible PVC insulated copper conductor multistranded cable 2.5 sqmm complete all as specified and directed.
Supply & Install Electric water Heater storage type (Geysers) Vertical, outer steel body with outer steel body with steel / Porecelain Enamel Glasslined inner tank inner tank and efficiency long life copper heating element 2 KW, white colour, shock resistance, magnisim anode rod, IPX4 water proof technology, fire retardent, tank design is suitable to withstand 8 bar pressure of capacity 25 litre, BEE 5 star rated complete will all accessories such as sefecty valve, thermostat, NRV, connection 15 mm pipe like hold and cold 450 mm long braided hose with two nuts and rubber washer (02 Nos for each geyser) suitble for geyser etc. complete all as specified and directed
M&L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in PVC conduit / PVC Casing & Caping complete all as specified and directed. Note- 2 Run of wire +1 run of Earth wire+ 1 run of PVC conduit / casing & capping will be measured as one unit.
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volt, Single door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed.
S & F GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
M/S R S Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .