8623 REPAIRS POLISHING AND PAINTING TO WOODEN AND STEEL FURNITURE AT RESIDENTIAL AREA UNDER AGE I R n D NSTL, VISAKHAPATNAM

Amount

M&L for removing unserviceable plastic cane from chair writing (seat) and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work including polishing the surfaces with french polish to obtain glossy finish all as directed by Engineer-in-Charge and as shown on drawing. [FD-20(M)]

All as per Item No.1 herein before but for chair dining (seat). [Drg No.Fd-16(M)]

All as per Item No.1 herein before but for chair verandah (Seat and back) [Drg No.FD-246/FD-19(M)]

M&L for removing existing underviceable seat (curved) from chair dinning and S & F new seat made of curved plywood BWR grade of 12mm thick including fixing 1mm thick laminate sheet on top surface with suitable adhesive complete all as shown on drawing and as directed by Engineer-in-Charge. [Drg No.SK-46]

M&L for removing unserviceable existing plywood base from Bed plywood top and S&F new 12mm thick plywood BWR grade of size 1940x905mm, fixed with minimum 18 Nos s/s screws for each bed all as specified and as directed by Engineer-in-Charge. [Drg No.FD-246]

M&L for removing old unserviceable/ broken handles from Almirah steel large/ medium and supply & fix new Godrej pattern handle with necessary fitting of approved quality all as specified and as directed by Engineer-in-Charge. [Drg No. FD-67, 245]

M&L for removing unserviceable/ broken table top for Table Writing and S&F new table top made out of 18mm thick prelaminated particle board exterior grade with one side Natural teak finish and other side balancing white lamination including provision of 4mm thick teak wood beading all around the top all as specified and as directed by Engineer-in-Charge. [Drg No. FD-275(M), FD-33]

All as per Item No. 7 herein before but for Table Dining 4 persons [Size 1200x900mm] [Drg No. FD-239]

All as per Item No. 7 herein before but for Table Dining 6 persons. [Drg No. FD-273(M)]

All as per Item No. 7 herein before but for Table Dining 8 persons. [Drg No. FD-273(M)]

All as per Item No. 7 herein before but for clerk table with or without drawers

All as per Item No. 7 herein before but for Table office clerk steel/ Table Typist steel/ Table Office Assistant. [Drg No. FD-84(M)]

M&L for spray painting to Chair tubular steel with arms with olive green synthetic enamel paint of approved quality including preparation of surface complete as specified and as directed by the Engineer-in-Charge. [Drg No. FD-75(M)]

All as per Item No. 13 herein before but for Almirah medium steel with shelves. [Drg No. FD-67(M)]

All as per Item No. 13 herein before but for Almirah large steel with shelves. [Drg No. FD-67(M)]

All as per Item No. 13 herein before but for Table office officer steel with drawers. [Drg No. FD-84(M)]

All as per Item No. 13 herein before but for Table office clerk steel/ Table Typist steel/ Table Office Assistant. [Drg No. FD-84(M)]

All as per Item No. 13 herein before but for Chair Verandah. [Drg No. FD-19(M)]

Removing existing unserviceable/ damaged steel lock from Almirah Steel Large/ Medium and S&F new lock along with two duplicate keys including minor repair/ adjustment as required complete all as directed. [Drg No. FD-67(M)]

All as per Item No. 19 herein before but for Table office clerk steel/ Table Typist steel/ Table Office Assistant. [Drg No. FD-84(M)]

Removing of existing unserviceable/ damaged seat of chair tubular steel with arms and S&F new seat of teak wood frame with new plastic cane including necessary GI nut & bolts complete all as directed by Engineer-in-charge. [Drg No. FD-75(M)]

All as per Item No. 21 herein before but for back of chair tubular steel with arms. [Drg No. FD-75(M)]

Removing of existing unserviceable/ damaged handle of chair tubular steel with arms and S&F new handle made of teak wood of size 20x45mm, 350mm long including applying two coats of French polish of approved quality complete all as directed by Engineer-in-charge. [Drg No. FD-75(M)]

M&L for removing the old unserviceable plywood from charpoy GI pipe/wooden charpoy and clean the surfaces thoroughly, S&F new 12mm thick BWR grade plywood of size 1940 x 905 mm, fixed with brass screws for each charpoy all as specified and as directed by Engineer-in-Charge . Make Century or equivelant make.

M&L for carrying out repairs to Chair revolving (Officer Chairs) by replacing cushions of seat [460x500mm size, 100mm thick, 40 density] & back [460x260mm, 75mm thick, 32 density] covered with tapestry cloth, including replacement of supporting belts and hessian cloth complete all as directed by Engineer-in-Charge. [Drg No. - TP]

M&L for removing the existing unserviceable plywood from both sides of "Foot Board" of bed plywood top and supply and fix 4mm thick plywood OST grade of approved quality with ½" teak wood beading as per drawing and as directed by Engineer-in-Charge. [Drg No. FD-246]

M&L for removing the existing unserviceable plywood from both sides of "Head Board" of bed plywood top and supply and fix 4mm thick plywood OST grade of approved quality with ½" teak wood beading as per drawing and as directed by Engineer-in-Charge. [Drg No. FD-246]

M&L for carrying out repairs to Chair Visitors & Chair Conference by replacing cushions of seat [460x500mm size, 100mm thick, 40 density] & back [460x260mm, 75mm thick, 32 density] covered with tapestry cloth, including replacement of supporting belts and hessian cloth complete all as directed by Engineer-in-Charge. [Drg No. - TP]

S&F caster wheels for chair revolving of any type including removing existing unserviceable wheels all as directed.

M&L for carrying out repairs to existing unserviceable/ damaged drawers [set of three] of table office clerk steel/ table office officers/ table typist steel including greasing, oiling, removing bends etc, welding where required for smooth functioning of drawers complete including supply and replacement of Godrej pattern lock with duplicate keys complete all as directed by the Engineer-in-Charge. [Drg No. FD-84(M)]

M&L for removing unserviceable/ broken leg of Table Writing/desk Table and S&F new leg made out of first class teak wood, shape and size all as shown on drawing and as directed by Engineer-in-Charge. [Drg No. FD-275 /FD-33]

All as per Item 31 herein before but for Table dining 6/8 persons. [Drg No. FD-273]

All as per Item 31 herein before but for Table dining 4 persons. [Drg No. FD-239]

All as per Item 31 herein before but for Table Centre. [Drg No. FD-274]

M & L for removing existing unserviceable seat/back/legs from desk/bench and new seat/back/legs of 1st class teak wood made to shape including necessary nuts, bolts, washers etc as required of suitable size all as directed by Engr - in - charge.

M & L for removing existing unserviceable seat and back cloth for chair visitors and conference and S & F with new cloth and cushion including necessary items all as directed by Engr - in - charge.

M & L for renovation of upholstered portion of sofa seat with arms by removing old tornout tapestry cloth, sign cloth, hassian cloth, coir fibre, cotton cord, plywood base, repairing and tightening of frame work, refixing springs including replacement of unseviceable springs, renovating the sofa complete with new cotton cord, coir fibre, 25 mm thick cushion of 40 density for seat and 32 density for back and arm rest, hessian cloth, sign cloth, tapestry cloth and 12 mm thick ISI marked BWR grade plywood for seat and back all as splecified and as directed by Engineer - in - Charge.

M&L for removing old unserviceable/ worn-out cushions from sofa single seater with detachable cushions and S&F new cushion of size 560x530x100mm thick 40 density for seat & 32 density for back, covered with tapestry cloth of approved shade & quality over a cover of lining cloth complete all as specified and as directed by Engineer-in-Charge. [Drg No. FD-281]

M&L for removing old unserviceable/ worn-out tapestry cloth covers of cushions from sofa single seater with detachable cushions and S&F new covers stitched with tapestry cloth of approved shade & quality over a cover of lining cloth for cushion of size 560x530x100mm thick complete all as specified and as directed by Engineer-in-Charge. [Drg No. FD-281]

M&L for taking down unserviceable wooden arm rest of sofa set single/ three seater and S&F new arm rest of same size made out of 1st class teak wood to shape all as shown on drawing and as directed by Engineer-in-Charge. [Drg No. FD-281]

S&F hard rubber shoes to bottom of legs of chair dining/ Teapoy/ Table dining/ Centre table duly screwed as shown on drawing including removing existing perished shoe. [Drg No. FD-16(M), 278, 239, 273, 274]

M&L for preparation of wooden surfaces of desk/table by scraping with emery paper, dusting, applying putty wherever required and polishing the surfaces with French polish to obtain glossy finish all as specified and as directed by Engineer-in-Charge. [Drg No. FD-17(M)]

S&F new medium grade MS Rectangular iron 1.88 mtr long, fixing arrangement with nuts and bolts at both ends and fixed to foot rest and head reat with nuts and bolts with iron flat stip as branches of bed all as directed.

S & F new MS Rectangular iron head rest 1.00 mtr length and 1.00 mtr Height assembled with suitable size of prelaminated head rest fully arranged with fixing nuts and bolts of suitable size for attachment of lomg rail of MS rectangular pipe as directed.

S & F new MS Rectangular iron Foot Rest 1.00 mtr length and 0.6 mtr height assembled with suitable size of prelaminated foot railing fully arranged with fixing nuts and bolts of suitable size for attachment of lomg rail of MS rectangular pipe new legs for bed complete fixing all as specified. (Note: plywood for the items no 45,46,47 has been considered in item no 25 (25 Nos) for making new bed).

M&L for removing defaced looking mirror and unserviceable plywood back from table dressing Gents with mirror and S&F new 5.5mm thick looking mirror of size 760X380mm and 6mm thick BWR commercial ply wood duly fixed to back side and teakwood plank piece all-round the mirror frame including provision of 02 Numbers key hole plate 3mm thick at back side of plywood for hanging purpose all as shown on drawing and as directed by Engineer-in-Charge. [Drg No. FD-230]

M&L for removing unserviceable top and both sides from table dressing Ladies with mirror and S&F new top and both sides made out of 19mm thick prelaminated particle board interior grade with Natural teak veneers on one face including 4mm thick teak wood edging on front side all as specified and as shown on drawing. [Drg No. FD-32]

Removing existing unserviceable seat and back cloth for chair visitors and conference and S & F with new cloth and cushion including necessary items .

BALAJI STEEL INDUSTRIES (BID ID -3428873)

ANJALI CONSTRUCTIONS (BID ID -3422958)

SANTOSH CONSTRUCTIONS (BID ID -3423324)