Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC AMBADIL NEAR PAACHAKKIL BUS STOP MALAPARAMBA POST KOZHIKODE DISTRICT KERALA 673 009 | KOZHIKODE | KOZHIKODE | KERALA | 673009 | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹47.8 L+₹94,835 (2.02%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹49.2 L+₹2.4 L (5.03%)Rejected-Finance 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
14 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2023_MES_608775_1
8249_GE_NW
Open Tender
Civil Works
Item Rate
180 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹96,000
Yes
23 Nov 2023
12 Jul 2023
16 Aug 2023
12 Jul 2023
14 Aug 2023
26 Jul 2023
12 Jul 2023 - 1 Aug 2023
Amount
Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing complete all as specified and directed..
Dismantling battens for tiles, shingles, etc of any size exceeding 15cm spacing including tilting fillets complete all as specified and directed.
Dismantling timber boarding any description fixed in any position with nails complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets complete all as specified and directed.
Dismantling timber scantiling 40 Sqcm and over in section unframed work in any position complete all as specified and directed.
M&L for IInd class hard wood boarding clean sawn with butt joints, 20mm thick as in soffits of gutter, eves board fixed with nails, etc complete all as specified and directed.
S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete complete all as specified and directed..
M&L for 2nd class hard wood in scantling clean sawn fixed as in purlins, rafters, etc in roof complete all as specified and directed.
S&F Plain Aluminium sheeting 0.71mm thick, Alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings complete all as specified and directed.
S&F 0.63mm thick glavanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type hook bolts and washers in roofs with grade of zinc coating 275 complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Seamless false ceiling made out of 12 mm thick Calcium silicate board of size 1800 x 1200mm with and including necessary Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with provn of Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl provn of two coats of OBD over a coat of primer and 1.5mm wall care putty complete all as specified and directed. Note:- (i) calcium silicate board shall be of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish.
Repairs to Aluminum door shutter / windows of any size including taking down and cleaning / repairing / replacement of all fittings and fixtures and re-fixing in the same opening complete all as specified and directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainlesss , steel ocver, governing picot made of brass other parts made of mild steel heavy duty in repairs.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.
S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing complete all as specified and directed.
S&F Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design complete all as specified and directed.
S&F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.
S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.
S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S & F 4mm thick white colour aluminium composite panel (approved by Engr-in-Charge) complete all as specified and directed
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed.
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&l for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as directed. Note: Water proofing compound shall be paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.
M&L 75mm thick PCC (1:3:6) type C-2 (Using 20mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.
M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for broken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for 100mm thick cement concrete type D2 1:4:8 with 40mm graded aggregate as in sub base complete all as specified and directed.
M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/600x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L Light shade Vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles exc 0.42 Sqm but not exc 1 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 laying floor finishes, complete all as specified and directed.
M&L Light shade Vitrified ceramic tiles 8-10mm(square/rectangular) area of each tiles exc 0.42 Sqm but not exc 1 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to recieve tiles complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty to newly plastered surface including preparation of surfaces complete all as specified and directed.
M&L for preparation of new plastered External surfaces and applying two coats of weather proof antifungal (Asian Ultima Protek) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. The quoted rate shall include acaffolding as required.
M&L for Complete removal of existing treatment of external wall using water jet, mechanical grinders including rubbing, washing down with water, etc and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint and primer shall be as per manufacturer's instruction. The quoted rate shall include acaffolding as required.
M&L for Complete removal of existing treatment of wall using water jet, mechanical grinders including rubbing, washing down with water, etc and applying applying two coats of Oil bound distemper over a of 1.5 mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. The quoted rate shall include acaffolding as required.
M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new surfaces of steel and two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of old steel surfaces and two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.
S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed.
Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters, walls etc incl all fittings complete all as specified and directed.
S & F 150MM dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend WC/MS clips etc fixed on walls complete all as specified and directed.
S & F 200mm dia of half round or 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips etc complete all as specified and directed.
S&F in repair PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.
S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and PVC waste pipe complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.
S&F in repair brass CP towel Rail 600mm long "D" type complete all as specified and directed.
S&F in repair vitreous china soap dish fixed to wall with screw complete all as specified and directed.
S&F in repair 15mm bore Pillar taps, in repair cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
Dismantling posts or struts from natural ground (wood, steel, or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling fencing wire/ mesh any type complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
Excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.
Removing excavated soil exc.250m but n.exc 500m and depositing where complete all as specified and directed.
Returning filling in soft/loose soil including spreading leveling watering and wall ramming in layers n/exc 25 cm thick all as spd and directed
M & L plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.
M & L RCC (Nominal mix ) type B1 1:2:4 (20MM graded aggregate ) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M & L RCC (Nominal mix ) type B1 1:2:4 (20MM graded aggregate ) for column, piller, post, piers and struts complete all as specified and directed.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; for flat rough finished cement concrete complete all as specified and directed.
M&L Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surface of concrete complete all as specified and directed..
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed
All as per item No-76 but here-in-before 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for cement concrete type B1 1:2:4 using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L 10mm thick rendering in cement mortar (1:4) on fair faces of concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.
S&F Stainless steel alphabets size 200mm x 150mm x 50mm fixing on granite surface complete all as specified and directed.
S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed..
M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
All as per item No.85 hereinabove but for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and directed.
All as per item No.85 hereinabove but for ornamental and intricate design complete all as specified and directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) , bars including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165
S&F MS Flat iron straps 50x5 mm as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc; and similar work conforming to Fe 290 Gde E-165
S&F mild steel screw bolts (machine made) dia of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm and n exc 10cm long complete all as specified and directed.
M&L for chain link fencing of mesh size (50x50)mm of 3.8mm dia wire complete all as specified and directed.
S&F MS round bar 10mm dia as in supporting of vertical fencing hooking ends and binding complete complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. and making good disturbed surfaces of walls, floors, etc.
M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting, modular white cover plate,flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for the following One light point controlled by one switch complete all as specified and directed One light point controlled by one switch complete all as specified and directed.
All as per item no.99 hereinbefore but for One fan point / exhaust fan point controlled by one switch & regulator on independent board complete all as specified and directed.
All as per item no.99 hereinbefore but for9 One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and directed.
All as per item no.99 hereinbefore but for One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and directed.
All as per item no.99 hereinbefore but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and directed.
All as per item no.99 hereinbefore but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and directed.
S&F modular switch 1 way 6 Amps,1 module complete all as specified and directed.
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F socket modular 6 Amps and 2/3, 2 module complete all as specified and directed.
S & F Modular socket 6 A/16 A - 2/3 pin, 2 module complete all as specified and directed.
S&F switch 15 A One way SP modualr type complete all as specified and directed.
Taking down existing Light fittings of any type and size complete all as specified and directed.
S&F surface mounted LED down lighter 2'x2', 36/40 W 240 Volt, 120 Lumen/watt, complete all as specified and directed. Make:- Philips Cat Part No. RC380B LED 30S-6500 G4 L60 W60 PSD OD or any other make in the approved manufacturers list.
S&F Tubelight fitting 1 x 20 w ,120 Lumen/watt, with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make:- REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL1213T8 DSTL 20WLED865SGLASS/CG/WIPRO or any other make in the approved manufacturers list.
S&F mirror light 10 Watt 240 volt, 100 Lumen/watt, complete all as specified and directed. Make :-Luker Cat Part No. LMR10 or or any other make in the approved manufacturers list.
S&F fan regulator electronic step type, modular type, 120 W, 2 module complete all as specified and as directed.
S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and directed.
Taking down old DBs of any size complete all as specified and directed.
S&F Sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar double door complete all as specified and directed.
S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and directed.
S&F MCB 'B' Curve 63 Amp Three pole, 415 Volts, complete all as specified and directed. Make L&T Cat Part No. BB30630B or any other make in the approved manufacturers list.
S&F MCB 'B' Curve 40 Amp SPN ,240 Volts complete all as specified and directed. Make L&T Cat Part No. BB20400B or any other make in the approved manufacturers list.
S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, complete all as specified and directed. Make Schneider Cat Part No. A9N1P06B to A9N1P32B,
S&F ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed. Make CG Cat Part Energion HS BLDC or any other make in the approved manufacturers list. Note :-Old exhaust fans shall be deposited to MES store yard at Kataribagh.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified Make Havells turbo force sp or any other make in the approved manufacturers list. Note:- Old exhaust fans shall be deposited to MES store yard at Kataribagh.
Taking down old sub main wiring of any size complete all as specified and directed.
M&L submain wiring with two single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note:- Two runs of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
All as per item No 120 here-in-before but with two single core 6 Sqmm PVC insulated copper conductor with one run 6 Sqmm copper conductor as earth wire complete all as specified and directed. Note:- Two runs of 6 sqmm PVC cable , one run of 6 Sqmm PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
All as per item No 120 here-in-before but with Four single core 16 Sqmm PVC insulated copper conductor with two run 10 Sqmm copper conductor as earth wire complete all as specified and directed. Note:- Four runs of 16 sqmm PVC cable , Two runs of 10 Sqmm PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length.
S&F building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt, 110 Lumen/watt, including suitable GI bracket of 25 mm dia (upto 1.5m) with fittings on walls complete all as specified and directed including taking down of existing light fitting of any type and make. Make :- Crompton Cat Part No. LSTS-45-CDL-M or any other model of the approved manufacturer from the list
S&F, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 3.5 core 50 Sqmm complete all as specified and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs ) by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 removing all Tiles before starting earthing work and laid the Tiles in same place after comletion of earthing and testing on completion also.
Taking down existing rusted cable trays except cables of any type or size complete all as directed and specified.
S&F of cable trays perforated pre-galvanised sheet of size 100 mm x 50 mm x 1.2 mm on walls parallel / perpendicular with necessary studs, nuts, bolts of galvanised steel of suitable length all as per site requirement. complete all as specified and directed.
Taking down old GI/ CPVC pipe of size 40 mm complete all as specified and as directed.
Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.
Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.
S&F in repair on wall/ floor concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed.
S&F in repair on wall/ floor concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia complete all as specified and directed.
S&F in repair on wall/ floor concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed.
Taking down old bib tap, stop cock,shower, pillar tap, sink cock, angle valve, health faucet, angle cock health faucet etc complete all as specified and as directed.
S&F of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and directed.
S&F of Bip cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and directed.
S&F concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and directed.
S&F 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete all as specified and directed.
S&F of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete all as specified and directed.
Taking down old PVC connection complete all as specified and as directed.
S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed.
S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one complete all as specified and directed.
Taking down old rotational moulded polythene water storage tanks of capacity 1000 litres complete all as specified and as directed.
S&F Rotational moulded polythene water storage tanks(Cylindrical vertical with closed Top) hoisted and fixed in Position all as specified of capacity 1000 litres complete all as specified and as directed.
Taking down old CPVC ball valve of size 20 mm /25 mm complete all as specified and directed.
S&F CPVC Ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and directed.
S&F CPVC Ball valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and directed.
S&F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.
S&F self closing angle cock pressure for urinalwith wall flange and 200 all as per specified and directed
M&L in repair aluminium strip 25 x 3.15mm with porcelain insulators,saddles and fixing screws etc for roof conductor and down conductor above ground all as specified and directed.
M&L in repair 32 x 6 mm GI strip with saddles and screws etc complete all as specified and directed burried in ground /wall all as specified and as directed.
M&L in repair air termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed.
Taking down old aluminium strip 25 x 3.15 mm with porcelain insulators,saddles and fixing screws and refixing the same etc for roof conductor and down conductor above ground all as specified and directed.
Taking down old GI strip 32 x 6 mm with saddles and screws and refixing same complete all as specified and directed burried in ground /wall all as specified and as directed.
M&L in repairs for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including all fixing arrangements with hexagonal headed screws all as specified.
M&L earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 32x6 mm as earth lead 7.5 mtrs by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber, RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI light grade earth lead protection pipes with funnel and wire mesh including taking down old one complete all as specified and as directed.
LAKSHMI BUILDERS
WELTRONENGINEERINGSERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .