NIT13

Circular Saw:Blade Dia 185mm, Cutting Depth 90° /45° 62/49 mm, Power 1050 W, No Load speed 4700 rpm, Weight:4.0 Kg.

Power Planner: (With HSS Blade ): Planing width 82 mm, Adjustable depth of cut 0 – 2.6 mm , Adjustable Rebate depth 0.9 mm, No load speed (min-1) 16,500 rpm, Net weight 2.8 kg

Speed Drill:Drilling dia in Wood / Steel - 25 mm for wood/10 mm for steel, Single Phase 230 V, Power input 420W, No Load Speed 2200 rpm, Weight 1.4 Kg

Bench Grinder: 3 Phase, Grinding Wheel Cup Type: 200mm x 40mm, Motor capacity: 1HP, R.P.M: 2800, Work Table Size: 185mm x 175mm

Carpentry Bench Vices(wooden Jaw with liner): 300 mm x175 mm

Carpentry Bench Vices(wooden Jaw with liner): 250 mm x175 mm

Carpentry Bench Vices(wooden Jaw with liner): 200 mm x175 mm

Wood Turning Lathe:Floor model, complete with standard accessories & electrical, Length of bed :-1800mm, Height of centre:- 200mm, Distance between centre :- 1200mm, H. P. of motor: - 1 AC 440 V. 50 hz 1440rpm Compound saddle, o/s turning attachment, true chuck , live centre.

Measuring Tools & Gauges: Carpenter Scale, Foot Rule, Measuring Tape

Work Bench (Sal wood); 1800 x 1200 x 900 mm

Rip Saw with wooden Handle, 18’’ (Taparia/Pye/Veritas/ ISI marked)

Cross Cut Saw 18’’ with wooden handle (Taparia/Pye/Veritas/ ISI marked)

Dovetail Chisel with a beveled back & wooden handle (Taparia/Pye/Veritas/ ISI marked)

Hand Saw16” (Taparia/Pye/Veritas/ ISI marked)

Tenon Saw 12’’ with wooden handle (Taparia/Pye/Veritas/ ISI marked)

Metal Jack Plane (plane base) 350mm (Venus/Taparia/Pye )

Metal Jack Plane 225 mm (Venus/Taparia/Pye )

Firmer Chisel 1’’ with wooden handle (Taparia/Pye)

Firmer Chisel 3/4’’ with wooden handle (Taparia/Pye)

Firmer Chisel 1/2’’ with wooden handle (Taparia/Pye)

Mortise Chisel 16 mm Bevel edge with wooden handle (Taparia/Pye)

Mortise Chisel 12 mm Bevel edge with wooden handle (Taparia/Pye)

Mortise Chisel 10mm Bevel edge with wooden handle (Taparia/Pye)

Mortise Chisel 8mm Bevel edge with wooden handle (Taparia/Pye)

Outside Spring Divider and caliper 6” (Bharat)

inside Spring Divider and caliper 6” (Bharat)

Outside Firm Joint Caliper 6” (Taparia)

Cross Peen Hammer (200 gm) (Taparia/pye/Venus)

Carpenter Pincer 8” (200 mm) (Venus/Taparia/Pye)

Flat Basterd File 350 mm Single Cut (JK)

Flat Basterd File Double Cut 250 mm(JK)

Half Round Basterd file 200 mm Single Cut (JK)

Half Round Basterd file 200 mm Double Cut (JK)

Triangular File (Slim Taper) 6” (JK)

Try Square 6 sizes(Bharat)

Raps File, 300 mm (JK)

Mallet, Handle 300 mm, wt.- 350 gm. (Teak wood) (Taparia/Pye/ Venus)

Claw Hammer ½ lb, with wooden handle (Fish)

Wood Turning Lathe Standard Tool Set (Taparia)

Adjustable Spanner 12” (Taparia/Pye)

Double Ended Spanner Set (Six Pieces) 6 mm – 7 mm to 16 mm - 17 mm drop forged chrome plated (Taparia/Pye)

Screw Driver 10 mm x 300 mm (Taparia/Pye)

Number Punch Set 0 to 9 Size ¼” (Venus/ ISI marked)

Twist Drill Steel Bit ¼”, 5/32”, 3/16”, 1/8”, 5mm & 10 mm (Miranda)

Carborundum Universal Stone 6” x 2” x 1” (ISI marked)

Tee Bar Cramp 4’ length (Tapaia/Pye/Venus)

Gimlet (Screw Auger ½”) (ISI Marked)

Gimlet (Screw Auger 3/8”) (ISI Marked)

Ball Peen Hammer 200gm with wooden handle (Taparia/Pye)

Inside spring type divider and cliper 6’’ (Bharat)

Outside spring type divider and cliper 6’’ (Bharat)

Stainless Steel scale 12’’ with aching & printing in inches & mm (Omega/ Crystal)

Hand operated Shear Machine Shear Up to 6 mm Thick MS sheet

Screw Driver engg. Pattern 3 mm dia & 65 mm length (Pie, Taparia)

Screw Driver engg. Pattern 4.5 mm dia & 75mm length (Pie, Taparia)

Cross Peen Hammer 500 gm with handle(Gedore, Pie, Taparia)

Divider Firm Joint 8’’ (ISI marked)

Pliers 6’’ combination Heavy Duty (Gedore, Pie, Taparia, Venus)

Metal File Flat Bastered 12’’ (JK)

Steel Tape 3 meter x 16 mm venus

Smith Try Square 18" x12" (Bharat)

Sheet Gauge (ISI Marked)

Number punch set (0-9) 5 mm sizeand Letter Punch (A- Z) (Venus / ISI marked)

Flat Chisel heavy duty(Taparia)

Blow Lamp of ½ lit Tank Capacity isi marked

Soldering Irons: Supply voltage 230 V / 1Phase / 50 Hz. 500 Watts, complete insulation with different types of copper soldering bits.

Apron Leather 24’’x 36’’ isi marked

Hand Gloves Leather isi marked

Hacksaw Frame 12’’ fixed type with wooden handle (Pie, Taparia )

Hand Drilling Machine ½’’Size Wolf , Bosch

Hand Grinder Portable 4” size Wolf Bosch

Welding shield (Hand screen) with white and green glass

Hydraulic Power Saw:Make : HMT/Batliboi/Kirloskar any other nationally orinternationally reputed brand with ISO certified manufacturing company make havingsame specifications, internationally quality control certification or national standard organization certification like TUV/ANAB/NABL accredited company; Size-200 mm; Stroke-135 mm; No. of strokes per minute-100 to 120; Blade size-300 mm to 350 mm; Capacity of round bar-175 mm;R.P.M-1440; Electric motor required-1H.P; Length-950mm; Breadth-400 mm; Height-800 mm; Weight(Approx.)-300Kg (With all necessary accessories & attachments)

Wire Gauge Standard isi marked

Steel Wire Brush for welding isi marked

Goggals for gas welding isi marked

Spark lighter isi marked

Single Phase Air cooled arc Welding Transformer Copper wind wire with Accessories: Single phase air cooled arc welding , transformer, step less variable current regulator for welding current range 40 to 300 amps. Conforming to IS- 1851 - 1975, with all standard accessories, operation & maintenance manual, ISI marked, ISO 9001-2008 manufacturing Organisation

Manual Metal Arc Welding M/C: Power Voltage: 3 Pase AC 415 V +- 15% 2) Frequency: 50 Hz, 3) Rated input Current: 25.4 A. 4) No Load Voltage: 73 V, 5) step less variable current regulator for welding current range: 40 - 400 A, 6) Rated Input Voltage: 36 V, 7) Duty Cycle: 60%, 8) Power Factor: 0.93, 9) Efficiency: 85%, Insulation Type: F with with all standard accessories, operation & maintenance manual, ISI marked, ISO 9001-2008 manufacturing Organisation

Oxy-Acetylene Gas Welding Set: a) High pressure welding blow pipe , six tip sizes, for welding M. S. plate up to 10 mm thick, b) Two stage oxygen regulator conforming to IS 6901- 1981 ( Max. outlet pressure 2 kg / cm2. ) c) Two stage acetylene regulator conforming to IS - 6901-1981 ( Max. Pr 1 kg / cm2 ) d) Pressure gauges to conform IS 36624 - 1979. e ) Standard Accessories 2 x 5 m length 8 mm bore hose, four hose clips, one pair welders goggle, one pair leather hand gloves, cylinder out fit - spindle keys.

Light Duty Spot Welding Machine: Portable type spot Welder rating 2.5 KVA, for welding up to 2mm + 2mm M. S. Sheet, Max throat depth 20 cm. with all standard accessories, operation & maintenance manual, ISI marked, ISO 9001-2008 manufacturing organisation.

Medium Duty All Geared Centre Lathe: Height of centers 220mm; Swing over bed 500mm;Swing over cross slide 270mm;Swing in gap (optional) 720mm; Distancebetween centers 1000mm; Spindle Nose / Bore A2-6* / 53mm; Spindle Speed range:16 from 40-2040 rpm forward 7 from 60-1430 rpm reverse; Spindle power: 11kW;Feed range (longitudinal) 60 from 0.04-2.24mm/rev;Feed range (cross) 60 from 0.02-1.12 mm/rev; Lead screw pitch: 6 mm; Metric threads 48 from 0.5-28 mm; Inch threads: 60 from 56-1 tpi; Module threads: 40 from 0.25-14mm; Diametral pitch (optional) 43 from 112-2 mm; Tailstock sleeve travel: 200 mm; Main motor power: 7.5 (std.) kW; With standard accessories;1 set service tools; Operation & maintenanceManual; 2 set of standard cutting tool. ISO certified manufacturing organisation, NABL accrediated Organisation

Bench Drill Machine: Make : HMT/Batliboi/ Kirloskar any nationally or internationally reputed brand with ISO certified manufacturing company make having same specifications, internationally quality control certification or national standard organization certification like TUV/ANAB/NABL accredited company. Drilling capacity-13mm;Spindle travels-100mm; Pillar diameter-58mm; Distance between spindle & pillar front-150mm; Distance between spindle & table-300mm; Distance between spindle & base-500mm; Spindle speeds (r.p.m)-480-820-1320-2080; 0.5H.P,1440r.p.m; Power of drive motor-400/440v,3ph; Gross weight-180Kgs(With all necessary accessories & attachments)

Outside Micrometer (25 – 50 mm), Anvil attachment type, Least Count: 0.001 mm,

Outside Vernier Micrometer (0 – 25 mm), Least Count: 0.001mm

Vernier Caliper (0 – 150 mm), Least Count: 0.02 mm

Screw Pitch Gauge, 0.4-7 mm, 18 Leaves

Sine Bar (250 mm), Stainless steel

Hearth with blower: Centrifugal motorised blower 3 HP / 440 V/ 3 Phase / 50 Hz with Forges, pipe Fittings valves, Hearth Size Made of M. S. Sheets 750 mm x 750 mm with water jacket, Height of 2.5 m (inverted Hopper with chimney)

Anvil: Single Horn 150 kg malleable cast iron with stand English Type

Leg Vice: 15 cm size .

Swage Block: Wrought Iron or Malleable cast Iron. 500x500 x 150 mm.

Swage Block: Wrought Iron or Malleable cast Iron. 450 x 450 x100 mm.

Tools and Gauges:Hammers of different size , Tong, Chisels, Flattener, pullers, Dies,Punch , Drift etc.

Power Hammer:1 Tonne capacity, motorised, equipped with foot lever operated,clutch to control strokes, spring loaded hand lever for adjustment of strokes, ram andC. I. anvil and the vertical pull rod , 3HP / 440 V A.C. / 3 phase / 50 Hz. / 960 rpmelectric motor and starter. Having ram weight about 70 kgs. maximum lift 190 mm,strokes /minute 160 to 200, hammers up to diameter 56 mm to 80 mm.

Bench Grinder: Grinding Wheel Cup Type: 200mm x 40mm; Motor capacity: 1HP;R.P.M: 2800; Work Table Size: 185mm x 175mm;

Work Bench: With vice 1800 x 1200 x 900 mm

Top and Bottom Swage with handle, Round (Standard size)

Flatter: Edge 50- 60 mm2, thickness- 10-15 mm, with handle

Fuller (Standard size)

Sledge Hammer (Standard size)

Pincer Tong : 400 – 600 mm Long arm

Close Flat Tong (M.S) : 400 – 600 mm Long arm, Length of bit or mouth 65 – 70 mm

Round Hollow Tong: 400 – 600 mm Long arm

Square Hollow Tong: 400 – 600 mm Long arm

Pick up Tong: 400 – 600 mm Long arm

Hot Chisel & Cold Chisel with Handle (Standard size)

Shovel (Small): Length – 800 mm.

Top and Bottom Fuller (Standard size) with handle

Set Hammer, 20-30 mm2 with handle

Marking Table with scribers:Black Granite surface flat, non magnetic non glaring,planing accuracy as per is of size 1000mm x 630mm x 150mm of grade Þ B ß with slab carbide scriber 150mm.

Surface plate: C. I. Surface plate , planed , hand swapped and seasoned , Brown &sharp type ribbing complete with handles for lifting & wooden protector cover, Conforming to IS- 2285 - 1963 .1) 450 mm x 450 mm.

Surface plate: C. I. Surface plate , planed , hand swapped and seasoned , Brown &sharp type ribbing complete with handles for lifting & wooden protector cover, Conforming to IS- 2285 - 1963 2) 450 mm x 600 mm.

Measuring Instruments & Marking Instruments:Fitting Hand Tools, Vice block,height gauges , vernier calipers, outside and inside calipers, micrometers, bevel protractor, files of different sizes and grades, Hacksaw frames, chisels, steel rules, Trysquares, drill bit set up to 25 mm, surface gauge, Number punch, dot Punch, Divider, Angle plate, Screw driver, Spanner set etc.

Tap & die set: Both tap and die set complete in box with accessories 0 - 10 BA , 1/4 "to 1 '' BSF /BSW, 1/2" to 3/4" NF , 1/4" to 3/4 " NC, 6mm to 16mm metric, one set each.

Bench Grinder: Grinding Wheel Cup Type: 200mm x 40mm; Motor capacity: 1HP ;R.P.M: 2800; Work Table Size: 185mm x 175mm;

Bench Vice: 250 mm

Speed Drill: Drilling dia in Wood / Steel - 25/10 mm; Power input 420W; No Load Speed 2200 rpm; Weight 1.4 Kg;

Bustard, Flat File(Double Cut) 10’’

2nd cut Flat File (Double Cut) 10’’

2nd Cut Triangular File 8’’

2nd Cut Round File 8’’

2nd Cut Half Round File 8’’

Smooth File(Flat) 12’’

Half round Smooth file 10’’

Stainless Steel Rule 12’’

Odd leg Caliper 8’’, Spring type

Divider 8’ Spring type’

Divider 6’’ Spring type

Outside Caliper 8’’, Spring type

Inside Caliper 8’,’ Spring type

Tri Square 6’’

Tri square 8’’

Hacksaw Frame 18’’ tubular (Adjustable)

Hacksaw Frame 18’’ tubular (Solid)

Die(Adjustable) Set with Handle

Drill Socket Morse taper (0-1, 1-2, 2-3)

Spanner ( 6-32 ) Double ended

Slide Wrench 8,’’ 12’’, 18’’

Scraper(Flat) 6’’

Scriber 6’’

Hand vice 6’’

Stainless steel Knife (Blade changing)

Pin Vice 6’’

Table Brush

File Brush

Number Punch (0-9)

Letter Punch ( A-Z)

Centre Punch (Round/Octagonal)

Dot Punch (Round with knurling)

Round and Square punch for forging shop

Ball Peen Hammer (1 lb) with wooden handle

Ball Peen Hammer (1/2 lb) with wooden handle

Ball Peen Hammer (1/4 lb) with wooden handle

Straight Peen Hammer 1 lb. With wooden handle

Cross Peen Hammer 1 lb. With wooden handle

Oil can (Medium size)

Hacksaw Blade 12’’ (All hardened)

Drill Bit (25 Nos. Set)

Tap Set (4 mm, 6 mm, 8 mm, 10 mm, 12 mm) With Handle

Drill Bit (Taper shank), ½’’, ¾’’, 1’’

Tap Wrench ½’’

LOKENATH INDUSTRIES

Sikdar Scientific Agency

Chakra Associate

biomed instrumintation

TESTMASTER

H P Singh Machinery Pvt Ltd

S.A.International Projects Pvt.Ltd

M/S. P. C. SOLUTION

DELTA TECHNOLOGIES

ZEPHYR ENTERPRISE (INDIA)

LOKENATH INDUSTRIES

ZEPHYR ENTERPRISE (INDIA)

Sikdar Scientific Agency

DELTA TECHNOLOGIES

S.A.International Projects Pvt.Ltd

M/S. P. C. SOLUTION

Chakra Associate

H P Singh Machinery Pvt Ltd