Karnataka

Active

Works

Roads

Improvements to road from Kyadigera to AG colony via Ganapathi Tanda in Deodurga Constituency of Raichur District. Under Rain Damage for the year 2024-25

Rural Development and Panchayat Raj Department

RDPR Division Office Raichur | Raichur, Karnataka

Amount: ₹1.7 CrCloses: 19 Jun 2026

Tender Value

₹1.7 Cr

EMD Value

₹3 L

Closing Date

19 Jun 2026, 10:00 pm

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Improvements to road from Kyadigera to AG colony via Ganapathi Tanda in Deodurga Constituency of Raichur District. Under Rain Damage for the year 2024-25

Tender Information

Tender ID

292711

Reference Number

RDPR/2025-26/RD/WORK_INDENT21008/CALL-2

Tender Type

Open

Product Category

Roads

Location

RDPR Division Office Raichur

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredPWD Contractor Registration Certificate

RequiredPrevious Five years Financial Turn over 2021-22 to 2025-26

RequiredSimilar nature of Work done Certificate

RequiredQuantity wise Work done certificate

RequiredLine of credit Bank letter head

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Qualifications of the tenderer required as mentioned in the Technical Bid KW-4 in General conditions 3 must be furnished.

Tender of the contractor, who have not completed the work in time, not executed the agreement in time in any other cases in this Division as per Clause 3.4 of Standard Tender Document and practices as mentioned in clause 25 of the standard tender document will not be accepted.

The undersigned reserves the right to accept any or all tenders without assigning any reason.

Contractor should execute the work by procuring cement, steel any other materials/Machinery for the work on their own and necessary quality test certificate should be produced and approval of the same.

Other details can be seen in the tender documents

Contractors should have to upload the Scan copy of all necessary Qualification Documents/ Certificates, and submitted duly attested by notary while tender Evaluvation in this Division

The Department is not responsible for any delay in accessing e-procurement portal.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 Qualification of Instructions to Tenders (ITT), will only be considered for evaluation.

Contractors should have to upload the necessary Qualification details as Section 3 Clause 1.1 to 1.10 in prescribed formats of KW-4.

The contractor should counter check all the designs of the scheme before execution / procurement of material and bring to the notice of the departmental officers for rectification.

The contractors have to verify the designs and drawings prepared by the department and supplied for construction. correct the same for any mistakes and to submit it for the approval of the department prior to commencement of execution.

The contractor should furnish the Contractor license Certificate

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Raichur within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-4.

The Building constructed under this programme shall be of high standard, requiring no major repairs for 3 years, The contractor shall furnish performance guarantee for 3 years as per clause and the performance guarantee will be released only after 3 years after completion of work.

The Tenderer shall obtain the workdone certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required.

Third party inspection is mandatory for all the works in this programme

The work should be completed within the stipulated period from the date of agreement & The date of agreement itself is the date of commencement of the work

The work should be completed in 6 months (including mansoon)

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract each tenderer in his/her name should have in the last five years period (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) achieved in at least two financial years Minimum Financial Turnover (in all classes of civil Engineering construction works only) of Rs. 332.26 lakhs (usually not less than 2 times the amount put to tender.) Profit and Loss Statement should be furnished. Turnover Certificate should be obtained from Charted Accountant with UDIN Number

Audited CA Certificate of Annual Turnover

In last five years (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) Satisfactorily completed as a prime contractor at least one single similar nature of Road work done (50% of the amount put to tender) i.e., not less than the amount of Rs 83.07 lakhs. Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. (With Work Indent Number)

Work Done Certificate

To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum quantities of work in last five years. 1. Earthwork, sub grade & Constn of Embankment : 1353.31 Cum 2) PCC/RCC : 226.04 Cum 3) GSB : 494.40 4) Metalling : 1854.00 Cum 5) B.T : 12360.00 Sqm 6) Steel : 9.622 Tonne

Work Done Certificate

Capabilities of Vendor

Liquid assets and /or availability of credit facilities of not less than Rs 83.07 lakhs (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) LOC should be in the Govt. format

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹4,160

EMD Fee Amount

₹3 L

Important Dates

Last Activity

5 Jun 2026

Published

5 Jun 2026

Bid Opening

20 Jun 2026

Download Ends

16 Jun 2026

Pre-Bid Meeting

16 Jun 2026

BOQ Preview

•

Improvements to road from Kyadigera to AG colony via Ganapathi Tanda in Deodurga Constituency of Raichur District.

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead

•

Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades,

•

levels and dimensions. Excavated material to be used in embankment with a lift upto 3m...

•

Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform

•

layers with motor grader on prepared surface, mixing by mix in place method with rotavato...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...

•

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.250 kg/m2 on the prepared bituminous surface cleaned with mechanical broom

•

Close Graded Premix Surfacing/Mixed Seal SurfacingProviding, laying and rolling of close-graded premix urfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 m...

•

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast)

•

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (200 m kilometre stone (precast))

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure /

•

Superstructure complete as per Drawing and Technical Specifications.

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Granular material

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications (Stones)

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.

•

Direction and place Identification Signs upto 0.9 sqm size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade she...

•

Minor Bridge of No. 5

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical Specifications, including setting out, shoring, strutting, barricading, caution li...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification

•

Granular material

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

Drainage Spouts using 100 mm GI pipe complete as per drawing

•

and Technical specification

•

PCC M15 Grade leveling course below approach slab complete as

•

per drawing and Technical specification

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2...

•

Curtain wall complete as per drawing and Technical specification

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.

•

Providing and laying Filter material underneath pitching in

•

slopes complete as per drawing and Technical specification

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

•

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

Providing and laying of apron with cement concrete blocks of

•

size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of

•

M-15 grade cement concrete with a minimum cement content of

•

250 kg/m3 as per I...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-4_21008_Kyadigera_Call-2.zip

Instructions to Tenderers • 4.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Improvements to road from Kyadigera to AG colony via Ganapathi Tanda in Deodurga Constituency of Raichur District. Under Rain Damage for the year 2024-25

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?