Special repair of barber room and other necessary hostel work in Senior boys hostel in MNSS Rai in Sonipat Distt.

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing In cement (HSR 8.5 b)

Dismantling concrete cement concrete plain 1:2:4 mi. (HSR 8.6 d)

Scraping of cement plaster. (HSR 8.32 C)

Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth..(HSR 10.26)

Providing and alying 80mm thick ISI Marked interlocking paver blocks conforming to IS 15658-2006/IRC SP 63-2004 of all shapes and colours in design mix cement M-40 over a bed of 30mm thick fine sand complete in all respect. (HSR 10.59)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (a)extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 (HSR 10.81 + 10.95)

Nicking cement concrete surface (over 28 days old) including preparation and laying slurry. (HSR 10.118)

Kotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62)

Providing & fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (HSR 14.89)

Providing & fixing vitrified tiles of size 600 x 600mm of approved make in skirting/dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (HSR 14.90)

Providing & fixing Ist quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR 14.92 b) Size 300mmx450mm

Laying and fixing Granite stone in all shades, 15mm to 18mm thick in following laid in any pattern as specified over base of 20mm thick cement coarse sand motar 1:3 and jointed with white cement slurry mixed with paigment to match the shade of granite stone. (excluding the cost of granite stone) (HSR 14.96)

Chowkats of commercial hard wood such as hillock, champ, chikrassy, and chaplash, etc., (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned), of doors and windows including iron hold fasts, corner straps, screws, bolts for hold fasts, etc., complete fixed in positon. (HSR 17.12)

Wrought iron and mild steel ladders, frame grills, gratings etfc., with ends of bars rivetted or forged framed window guards, barred iron doors, etc., including fixing in position. (HSR 18.10)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Fe-500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding and placing in the position complete. (HSR 18.22)

Preparation of sub grade, including trenching, rough dressing of soil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed (HSR 24.1)

Providing & fixing Ductile iron double seal manhole covers and frames of 610mm x 610mm with locking arrangement on clear water tanks including cost of setting in cement concrete 1:2:4 to correct alingnment and levels including carriage, loading unloading etc. complete in all respects to the satifaction of Engineer-in-Charge. (HSR 28.59)

PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of (HSR 30.41 i) (i)450mmx300mm with one no. tap

Supply of Granite Stone (N.S)

Providing and fixing in position best indian make beveled edge 5.5 mm Thick mirror mounted on asbestos sheet ground fixed in position by means of chromium plated brass Screws and washers and rawl plugs embedded in the wall.(N.S.)

The Sayara Coop L and C Society Ltd