Repairs to EOC Building at Valsad Ta. Valsad Dist Valsad (Plastering WaterproofingShed Colour work door & window etc.)

Name of work :-

Repairs to EOC Building at Valsad Ta. Valsad Dist Valsad (Plastering waterproofing,Shed,Colour work, door &

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 39.0 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Demolition and disposal of unserviceable materials with all lead and lift.(i) 18.50 Cumt 609.26

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 4.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

4 Dismentling steel work including distempering and stacking the materials 560.00 Kg 3.67

with all lead and lift.

5 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 4.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

6 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 12.00 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

7 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 16.00 Sqmt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush pointing in colour

cement slurry etc. complete. Colour and Shade approved by Engineer-In-

8 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 23.00 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

9 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 6.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

10 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 6.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

11 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 2.00 Nos 28.79

12 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 2.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

13 Providing and fixing screw down bib taps of following size.(B) Brass 14.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

14 Providing and fixing pillar tap, capstan head, screw down high pressure 4.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

15 Providing and fixing wsh down water closet (European type, W.C. Pan) 2.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

16 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 2.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

17 Providing and fixing plastic seat and cover for wash down water closer 2.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

18 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 2.00 Nos 355.52

long with wall hook and other accessories etc. completed

19 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 2.00 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

20 Providing and laying (two level or slopes) and jointing with stiff mixture of 10.00 Rmt. 518.84

Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes

Providinglaying lime concrete

and fixing S.W. gully1:5:10 (1-Lime

trap with putty :5-Fine

C.I. grating samd : 10-

brick masonry 2.00 Nos 1246.92

22 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. Size having 2.00 Nos 958.17

weight not less than 35Kg.

23 Removing and scraping of old deteriorated plaster of any thickness 148.00 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

24 Providing 15mm thick cement plaster in single coat on Rough (Similar) 119.00 Sqmt 171.80

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:3 (1 cement : 3 coarse sand) finish

etc. comp. For Ground floor

25 Providing 10 mm. Thick cement plaster in single coat for plastering on 29.00 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

26 Removing dry or oil bound distemper by a washing and scraping and sand 879.00 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

27 Removing dry or oil bound distemper by a washing and scraping and sand 290.00 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

28 Applying two coats of putty & two coats of primer of approved brand and 775.00 Sqmt 40.59

manufacture on new wall surface to give an even shade including

29 Wall painting (two coats) with plastic emulsion paint of approved brand 485.00 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

30 Wall painting (two coats) with plastic emulsion paint of approved brand 290.00 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

31 Finishing wall with weather proof exterior emulsion paint on wall surface 394.00 Sqmt 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

32 Painting Two coats (excluding priming coat) on previously painted steel 29.00 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

33 Removing, Repairing and Refixing Old existing wooden door shutter 51.00 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

34 Removing, Repairing and Refixing existing Alluminium window frame with 24.00 No 580.75

glass of all size shutter/frame, replacing all old Mosquite Net fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the window,

all materials, transport cost, taxes etc.and as directed by engineer in

charge etc complete.

35 Removing, Repairing and Refixing existing Alluminium fix ventilation 6.00 No 348.45

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

36 Applying general insecticide pest control treatment to floor,cupboards 171.00 Sqmt 89.28

etc including labour materials etc.complete.using lmidacloprid 30.5 Scas

per IS 6313 part -III ( 0.075% concentration by mass ) is recommended

10.5ml chemical diluted with 5 liter of water application 0.5 liter chemical

/ Sqm of surface is recommended as per I.S.

37 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 1.00 Cumt 3683.3

4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

38 Providing & Fixing in position standard extruded approved colour 1.00 Sqmt 2049.29

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For

ventilation including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For Ventilators V,V1

39 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 4.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & shutter is to be waterproof,

weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to

be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-

40 Providing and fixing Mirror polished 18 mm thick Granite stone in Single 26.00 Sqmt 2966.37

piece with full round edge and polished of approved quality in clading on

Cill & Jambs and around the doors/ windows/ ventilation with 12 mm

thick cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in charge

41 Providing & fixing in position alluminum partition with standard extruded 16.00 Sqmt 2478.54

colored anodized alluminum of approved color alluminum pipe size

63mm x 38mm x 2mm thick make a frame vertical and horizontal grid

distance as shown in drawing with panel of 4 mm thick alluminum

composite Panel (ACP) sheet and 5mm thick transparent float glass as

directed with glass film fixed with transparent silicon rubber gasket in

panel with glazing clips 19 mm x 19 mm in size . partition opening door

shutter /sliding shutter having a styles 50 mm x 50mm x 2 mm thick in

style and top ,bottom and middle rails 85 mm x 50 mm x 2 mm thick size

with anodized alluminum heavy handle, stoppers, Aldrop, hinges , lock

door stopper fixtures and fastening with required all labour and

equipment and including rebar up to slab level in half partition and as per

detailed drawing as directed with all lead and lift.

42 Steel Work welded, in build up sections framed work including cutting, 39.60 Q 9047.86

hoisting fixing in position and applying a priming coat of red lead paint (A)

In beams and joints, channels, angles, tees, flats with connection plates

or angle cleats as in main and cross beams, hip and trussed purlins

connected to common rafters and the like.

43 Providing U.P.V.C sheet roofing fixed with glavanished iron J or L Hooks, 596.00 Sqmt 727.20

Bolts and G.I. limpet washer or G.I. limpet washer. filled with white lead

complete. (1) 2.50 mm thick sheet.

44 Providing & laying Synroof Hi Build 1mm thick ecetrometric, premium 369.00 per 579.74

quality acrylic coating as a water proofing membrane finished which Sqmt

consists a coat of bitumat primer & 80 CSM membrane on terrace with

ultra violet resistance working upto any height with 5 years guarantee

against any leakage etc. complete per detail specification & as directed by

Engineer-in-charge.

Rupees Fifteen Lakh Forty One Thousand Four Hundred Sixty Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1541460.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division