CLEANING OF SEWAGE LINE AND MANHOLE INCLUDING MISC REPAIRS IN RALAWAS UNDER GE BANAR

Amount

Cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, by removing solid/liquid or mud accumulated in the trap or CI/PVC pipe line /Bends by rodding manually and removing the sludge duly covered in a hygenic manner and making the WC (Indian or European type)/WHB/Sink/Floor trap/Gully trap fully functional upto 1st Manhole,by deploying safaiwala and using manual/pressure cleaning pump & flexible rods and other necessary equipments to maintain internal sewage system in Ralawas area complete all as specified and directed by Engr-in-Charge. Notes:- (i) Contractor or his authorised representative collect such type of complaints from B/R complaint cell at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) The safailwala shall come on daily basis with necessary equipments as reqd to carry out the necessary complaints. Non availability of equipments in any case will not be admissible. (iii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made ar Rs 50.00 per complaint per day from the contractor.

M&L for cleaning/taking out sludge/mud/silt from manhole, septic tank of any size and capacity by manual or mechanically including dewatering and removing the sludge/liquid extracted in covered van/trolley/tanker out side the MoD land, complete, all as specified and directed by Engineer-in-Charge. Note: Sludge/mud/silt shall only be measured before taking out from manholes/septic tank and nothing extra shall be paid dewatering.

M & L for Cleaning of Soakage well of any capacity or description including cleaning and pumping out fluid, & washing down with water complete and removing the sludge/liquid extracted in covered van/trolley/tanker out side the MoD land, complete, all as directed.

M&L for cleaning of sewage pipe line 100 MM dia of any depth by roding from manhole to manhole flushing with water cleaning all as directed by Engineer-in-Charge.

M&L for cleaning of sewage pipe line 150MM dia of any depth by roding from manhole to manhole flushing with water cleaning all as directed by Engineer-in-Charge.

M&L for cleaning of sewage pipe line 200/250MM dia of any depth by roding from manhole to manhole flushing with water cleaning all as directed by Engineer-in-Charge.

Surface dressing n.exc 15cm deep including Cleaning away all grass vegetation, saplings, shrubs, brush wood under growth and roots for making approach and around septic tanks, soakwells, manholes to manholes for sewage line and removing the rubbish to a distance not exceeding 50 M and deposting as directed by Engineer-in-Charge.

Excavation in trenches, n. exc 1.50 mtr wide and n. exc 1.50 mtr in depth, for foundation, etc or manholes, pier holes etc n .exc 10 Sqm on plan and getting out in any type of soil all as specified.

All as per item No 8.00 above but depth exceeding 1.50 mtr but n. exc 3.00 mtr and getting out in any type of soil complete all as specified.

S&F 100mm dia salt glazed stone ware drain pipe laid in trenches and jointed all as specified.

S&F 150mm dia salt glazed stone ware drain pipe laid in trenches and jointed all as specified.

S&F 200/250mm dia salt glazed stone ware drain pipe laid in trenches and jointed all as specified.

Demolition of RCC manhole covers/slabs in any positioin not otherwise specifically provided all as directed by Eingineer-in-Charge.

M&L for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slab for manholes & septic tanks with plain faces set in CM (1 :6) complete all as specified.

M&L for mild steel deformed or twisted bars 6 to 8 mm dia cut to length bent to shape required, including bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, by Engineer-in-Charge.

Returning and filling in including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified.

Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level where directed at a level n.exc 1.50 mtr above the starting point complete all as specified.

Demolition and breaking up drain pipes (Salt glazed stone ware,AC, or Reinforced concrete) 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes all as specified & directed by Engineer-in-charge.

All as per item No 18.00 here in above but 150mm bore pipe.

All as per item No 18.00 here in above but 200mm bore pipe.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of salt glazed stone were drain pipes for 100mm dia bore after they are laid and tested complete all as specified..

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of salt glazed stone were drain pipes for 150mm dia bore after they are laid and tested complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of salt glazed stone were drain pipes for 200/250mm dia bore after they are laid and tested complete all as specified.

S&F for 75mm thick steel fibre reinforced (SFRC) man hole/ drain cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for brick work straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 CM complete all as specified.

All as per serial item No. 27.00 here-in-before but except stones.

Extra over stone walling for hammer dressing to face stone and dressing of face, beds and joints as specified of random rubble walling with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified.

M&L rendering 15 mm thick in CM 1:4 including WPC on stone masonry surfaces or on brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified.

M&L preparing new surfaces of walls, plastered and applying two coat of cement base paint on walls including cornices, pillasteres over one coat of white wash complete all as specified.

Siddhi Vinayak and Co

Kusum Traders

vinayandsons