KARVAD WATER SUPPLY PROJECT: VAPI MUNICIPAL CORPORATION PHASE 2

SUMMARY (SCHEDULE-B)

KARVAD WATER SUPPLY PROJECT (PHASE-2)

BID DOCUMENTS FOR

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING,

LOWERING, LAYING AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING

OF PUMPING MACHINERIES, HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC

WORK OF INSTRUMENTATION WORK & SCADA SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2),

WORK INCLUDING 5 YEARS OF OPERATION & MAINTENANCE FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SR NO SCHEDULES NAME OF WORK AMOUNT (RS.)

1 SCHEDULE - B1 GRAVITY MAIN PIPELINE

2 SCHEDULE - B2 RISINGMAIN PIPELINE

3 SCHEDULE - B3 SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

4 SCHEDULE - B4 HEADWORK DEVELOPMENT

5 SCHEDULE - B5 CONSTRUCTION OF HOUSE CONNECTION- 8085 Nos.

6 SCHEDULE - B6 SITC WORK OF INSTRUMENTATION WORK & SCADA SYSTEM AT GRAVITY DISTRIBUTION NETWORK

7 SCHEDULE - C Operation & Maintenance (For 5 Years)

I / We am / are willing to carry out the work at…………………………………… % above / below percent/at par (should be written in figures and words) of the

estimated rates mentioned above . Amount of my/ our tender works out as under.

* Estimated amount * Estimated amount

Put to tender Rs …… Put to tender Rs ……

Deduct :....... % below Rs……… Add :....... % above Rs………

Total Rs…………. Total Rs………….

* ( Please strike out whichever is not applicable ).

SUMMARY (SCHEDULE-B)

KARVAD WATER SUPPLY PROJECT (PHASE-2)

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING, LOWERING,

LAYING AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING OF PUMPING MACHINERIES,

HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC WORK OF INSTRUMENTATION WORK & SCADA

SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2), WORK INCLUDING 5 YEARS OF OPERATION & MAINTENANCE

FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SCHEDULE - B1: GRAVITY MAIN PIPELINES

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.1: Providing and supplying D. I. K-7 grade pipes for following nominal bore diameter with internal cement mortar

lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance

1 to departmental stores, stacking etc. complete. (IS 8329-2000).

Item No.2: Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as

per BS-EN-545/1995 Class-A series K12 suitable for use with DI pipes manufactured as per IS:8329/1994 delivery of specials is to

be made to VPMC store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

2 insurance, inspection charges, octroi etc. complete. (With external bitumen & zinc coating & internal cement mortar lining)

Up to 300 mm Dia.

2a Above 300 mm Dia. 0.00 Kg 158.00 -

Item No.2: Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as

per BS-EN-545/1995 Class-A series K12 suitable for use with DI pipes manufactured as per IS:8329/1994 delivery of specials is to

be made to VPMC store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

2 insurance, inspection charges, octroi etc. complete. (With external bitumen & zinc coating & internal cement mortar lining)

Socket & Spigot Type Up to 300 mm Dia.

2a Above 300 mm Dia. 12818.55 Kg 151.00

Item No.3: Providing and supplying ISI mark CI D/F Sluice Valves as per IS : 14846 (Latest Edition )of following class and

diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

3 conveyance to departmental stores, stacking etc. complete.

PN-1 With hand/wheel cap operated (Alt-1 type long body)

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.4: Providing and supplying C. I. Temper proof Air valves with ss 304 Float gun metal- nozzle of approved make &

quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

4 charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Air Valves Double Acting (DS2)

Item No.5: Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and strutting if

required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up

to all required lead cleaning the site etc. complete for all lifts and strata as specified.

For 0 to 1.5 m :

In all sorts of soil and soft murrum

5a In hard murrum,boulders,incl. Macadam road 7882.25 Cu.m 155.25

5b Soft rock 7882.25 Cu.m 187.45

5c In Hard rock 4729.35 Cu.m 427.80

For 1.5 to 3.0 m :

In all sorts of soil and soft murrum 405.75 Cu.m 112.70

5e In hard murrum,boulders,incl. Macadam road 486.90 Cu.m 170.20

5f Soft rock 405.75 Cu.m 205.85

5g In Hard rock 324.60 Cu.m 446.20

Item No.6: Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes of various

classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge

6 including hydraulic testing etc. comp.

6j 750 mm dia 30.00 Rmt 656.65

Item No.7: Lowering, laying and jointing in position following C. I. / D/F Sluice valves including cost of all labour, jointing

material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.

Item No.8:Lowering, laying and jointing in position following C. I. / D/F Air valves including cost of all labour, jointing

material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.

8 (double ball Flanged )

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.9: Construction of valves chambers in brick or bela stone masonry, locally available in CM 1:6. Foundation concrete

150 mm thick in CC 1:4:8 of trap metal size 25 mm to 40mm thick, inside cement plaster in CM 1:3 and cement pointing outside

in CM 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS bar etc.

9 complete as given size) up to 1 mt. depth from GL to pipe invert level incl. complete civil works with 23 mm thick brick

masonry wall in CM 1:6 With precast slab in two parts 15 mm-

SV & ScV. Chamber - 0.6 x 0.6 x 1.0 m (For valves of 50, 65, 80, 100, 125 & 150 mm dia.)

9a Air Valve Chamber - 1.3 x 1.3 x 1.0 m (For 40 to 200 mm dia.) 65.00 No. 13053.65

Item No.10: Extra depth of Valve chamber beyond 1.00 mt. depth.

SV & ScV. Chamber - 0.6 x 0.6 x 1.0 m (For valves of 50, 65, 80, 100, 125 & 150 mm dia.) 0.00 mt. 3767.40 -

10a Air Valve Chamber - 1.3 x 1.3 x 1.0 m (For 40 to 200 mm dia.) 31.25 mt. 6996.60

Item No.11: Thurst Block : Providing and Casting in situ C.C. for Thrust Block in grade M-20 (Proportions as per mix design or as

per table 9 of IS456 2000 in masses by weight batching) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC

11 work, including scaffolding centring, formwork, needle vibrated consolidation, curing complete up to 6 meter depth or height

etc. complete for Thrust Block work. (excluding cost of reinforcement)

Footing for column or foundation ( with form work)

Item No.12: Reinforcement for Thrust Block : Supplying cutting, bending, binding and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wire for structures only including lift up to 6 meter height or

depth below G.L., Do-Thermo mechanically treated (TMT) bars Fe-415 grade for all diameters.

Item No.13: Refilling the pipeline trenches incl. ramming, watering, consolidating disposal of surplus stuff as directed within a

radius of 3 km. 31192.00 Cu.m 25.30

Item No.14: RCC Road Reinstatement : Reinstatement of roads with RCC where pipe crossing the asphalt road / RCC road /

industrial area / residential area. the Work including excavation, dressing, formwork, curing etc. completed and making a base

14 for road, 100 mm thick PCC in M10 grade of concrete, and Providing and laying 150 mm thick RCC M15 grade concrete,

Providing TMT bars FE-415 reinforcement for RCC work including bending, binding and placing in position complete.

Asphalt Road Reinstatement : Reinstatement of Asphalt roads with Providing and Laying coarse sand in Single layers with motor

grader on prepared surface with using vibrator roller, Prepration of granular sub base (grade 1) mixing in mechanical mix plant

at OMC with vibratory power roller, Providong and laying WBM (Grade 2) using B.T.M.C metal with stone dust spreading,

watering, vibrator rolling etc completed, providing and spraying prime coat with bitumen emulsion, Providing and laying 50 mm

14a thick Bituminous Macadam with B.T. aggregate, using emulsion RS-1 for tack coat with mechanical sprayer and Bulk asphalt VG-

30 for mixing including heating and mixing the aggregate and asphalt in drum mix plant and hot laid process spreading by paver

finisher and consolidation with roller work including providing all materials equipments, tools and plants, fire wood, oil,

kerosene, labour charges etc. complete

Item No.15: Culvert crossing.- Construction of RCC support for culvert crossing at various location on pipeline route. Work

including excavation of pits in all type of strata, 100 mm thick PCC in M10 grade concrete, Providing and casting RCC Column

and Footing in situ mass cement concrete in grade M-15 ( proportions as per mix design or as per table 9 of IS:456-2000 ) RCC

work, including scaffolding centring, formwork, needle vibrated consolidation, curing complete up to 6 m depth or height with

15 centring and shuttering etc. complete. Supplying cutting, bending, binding and placing in position steel as per plan and design

and as per ISS 2502 including cost of steel and binding wires for reservoirs / structures only including lift up to 6 m height or

depth below GL for all diameters. Supply, and installation of 8 mm thick MS clamp for pipe anchorage with required nut bolts

and 3 mm sacrificing plate at RCC column and bottom of pipe etc. completed as per drawing and minimum BoQ.- RCC Support

Item No.16: Drilling of 300mm dia Horizontal borehole for wastwwater main pipeline crossing under the road incl in all strata

with required length incl fixing of 250mm dia M.S casing pipe with pushing etc complete various size of pipe 35.00 Rmt 3988.07

Total for Schedule-B1(Rs.) =

SUMMARY (SCHEDULE-B)

KARVAD WATER SUPPLY PROJECT (PHASE-2)

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING, LOWERING,

LAYING AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING OF PUMPING MACHINERIES,

HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC WORK OF INSTRUMENTATION WORK & SCADA

SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2), WORK INCLUDING 5 YEARS OF OPERATION & MAINTENANCE

FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SCHEDULE - B2: RISING MAIN PIPELINES

SR. No. ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No. 1 : Providing and supplying D.I. K-9 grade pipes for following nominal bore diameter with internal cement mortar

lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

1 conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). For sewerage project cement mortor lining shall

be with sulphate resistance cement.

Item No. 2 : Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as

per BS-EN-545/1995 Class-A series K12 suitable for use with D.I.Pipes manufactured as per IS:8329/1994delivery of specials is

to be made to VpMC store or site of works any where in Gujarat including all taxes, liading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete

Socket & Spigot Type.

Above 300 mm Dia. 21684.93 Kg 151.00

Item No. 3 : Providing and supplying ISI mark CI D/F Sluice Valves as per IS : 14846 (Latest Edition) of following class and

diameter including all taxes, insurance, transportation, freight charges, octroi, charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Hand operated Alt1 type : PN

Item No. 4 : Providing and supplying C. I. Temper proof Air valves with SS 304 Float gun metal- nozzle of approved make &

quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

4 charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Temper Proof AV With Isolating Sluice Valve- PN

Item No. 5 : Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if

required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up

5 to all required lead cleaning the site etc. complete for all lifts and strata as specified.

For 0 to 1.5 m :

In all sorts of soil and soft murrum 6007.65 Cum 102.35

5a In hard murrum,boulders,incl. Macadam road 4291.18 Cum 155.25

5b In soft rock and/or masonry in CM or L M or Lime Concrete. 4291.18 Cum 187.45

5c In hard rock and / or in C. C. 1:2:4 or RCC with blasting and chiseling or by chiseling only. 2574.71 Cum 427.80

SR. No. ITEM DESCRIPTION QTY. UNIT RATE (RS.)

For 1.5 to 3.0 m :

In all sorts of soil and soft murrum 216.63 Cum 112.70

5e In hard murrum,boulders,incl. Macadam road 259.96 Cum 170.20

5f In soft rock and/or masonry in CM or L M or Lime Concrete. 216.63 Cum 205.85

5g In hard rock and / or in C. C. 1:2:4 or RCC with blasting and chiseling or by chiseling only. 173.31 Cum 446.20

Item No. 6 : Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes of various

classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge

including hydraulic testing etc. comp.

Item No. 7 : Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air

valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc.

Temper Proof Air Valve

Item No. 8 : Providing, supplying and installation of air riser (flanged Tee) on the pipe line at suitable place as per design &

directed by Engineer-in charge. Work including excavation of pit, refilling, levelling of gorund after completion work. This

includes supply, delivery and installation of GI/ M.S. double flanged pipe. MS pipe having flange thickness conforming to IS

8 3589-2001, R.C.C. foundation block & column in C.C. M-150 as per drg and indicated in minimum BoQ etc. complete. The

length of riser pipe is 3.00 mt from above pipe top -

Temper Proof Air Valve

Item No. 9 : Construction of valves chambers in brick or bela stone masonry, locally available in CM 1:6. Foundation concrete

150 mm thick in CC 1:4:8 of trap metal size 25 mm to 40mm thick, inside cement plaster in CM 1:3 and cement pointing

outside in CM 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS bar

etc. complete as given size) upto 1 mt depth from GL to pipe invert level incl. complete civil works but excluding cost of

9 excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI MH frame and cover (excluding cost of

CI-MH frame and cover) with 23 mm thick brick masonary wall in CM 1:6

With precast slab in two parts 15 mm

Item No. 10 : Extra depth of Valve Chamber beyond 1.00 mt. depth. as per attached calculation sheet

For 1.5 m X 1.5 m Chamber : 0.90 Rmt 10440.00

SR. No. ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No. 11 : Thurst Block : Providing and Casting in situ C.C. for Thrust Block in grade M-20 (Proportions as per mix design or

as per table 9 of IS456 2000 in masses by weight batching) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC

work, including scaffolding centering, formwork, needle vibrated consolidation, curing complete up to 6 meter depth or

height etc. complete for Thrust Block work. (excluding cost of reinforcement) 187.13 Cum 6348.00

Item No. 12 : Reinforcement for Thrust Block : Supplying cutting, bending, binding and placing in position steel as per plan

12 and design and as per ISS 2502 including cost of steel and binding wire for structures only including lift up to 6 meter height or

depth below G.L., Do-Thermo mechanically treated (TMT) bars Fe-415 grade for all diameters. 14970.40 Kg 84.19

Item No. 13 : Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed

within a radius of 3 km. 15480.93 Cum 25.30

Item No. 14 : Asphalt Road Reinstatement :Reinstatement of Asphalt roads with Providing and Laying coarse sand in Single

layers with motor grader on prepared surface with using vibrator roller, Prepration of granular sub base (grade 1) mixing in

mechanical mix plant at OMC with vibratory power roller, Providong and laying WBM (Grade 2) using B.T.M.C metal with stone

dust spreading, watering, vibrator rolling etc completed, providing and spraying prime coat with bitumen emulsion, Providing

14 and laying 50 mm thick Bituminous Macadam with B.T. aggregate, using emulsion RS-1 for tack coat with mechanical sprayer

and Bulk asphalt VG-30 for mixing including heating and mixing the aggregate and asphalt in drum mix plant and hot laid

process spreading by paver finisher and consolidation with roller work including providing all materials equipments, tools and

plants, fire wood, oil, kerosene, labour charges etc. complete

Item No. 15 : RCC Road Reinstatement : Construction of RCC roads including all civil works with labour and material cost.

Providing and laying RCC M20 grade concrete complete work including form work, curing etc. completed 7561.50 Sq.m. 963.16

Item No. 16 : Culvert crossing.- Constuction of RCC support for culvert crossing at various location on pipeline route. Work

including excavation of pits in all type of strata, 100 mm thick PCC in M10 grade concrete, Providing and casting RCC Column

and Footing in situ mass cement concrete in grade M-15 ( proportions as per mix design or as per table 9 of IS:456-2000 ) RCC

work, including scaffolding centering, formwork, needle vibrated consolidation, curing complete upto 6 m depth or height

16 with centering and shuttering etc. complete.Supplying cutting, bending, binding and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wires for reservoirs / structures only including lift upto 6 m

height or depth below GL for all diameters. Supply, and installaion of 8 mm thick MS clamp for pipe anchorage with required

nut bolts and 3 mm sacrificing plate at RCC column and bottom of pipe etc. completed as per drawing and minimum BoQ.-

RCC Support @ 4 mt C/C 13.32 Cum 15666.00

Item No. 17 : Road /Canal Crossing : Drilling of following dia horizonal borehole for water main pipeline crossing under the

road incl in all strata with required length incl fixing of following dia MS casing pipe with pusing etc completed various size of

pipe for following dia pipe : with MS Casing Pipe without water main (only Casing pipe)

Dia of Drilling of borehole: 1300 mm

Dia of MS Casing pipe : 1200 mm

Dia of Water main pipe line : 600 mm 70.00 Rmt 47367.78

Dia of Drilling of borehole: 900 mm

17a Dia of Water main pipe line : 500 mm

Dia of MS Casing pipe : 800 mm 35.00 Rmt 25712.67

Total for Schedule-B2(Rs.) =

Name of Project: Karwad Water Supply Scheme (Phase 2) for Vapi Municipal Corporation

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 1: SUBMERSIBLE TYPE PUMPSET- Supply, installation, testing & commissioning of

Submerged Submersible pump sets with suitable for working on three phase, 50 Hz±3%,415V±10% AC

supply, suitable RPM with 3 core flat copper cable from pump to starter panel with cable end

terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump

sensors and other protection, pump control unit etc. suitable construction of foundation/

installation device with cable length from pumps to panels with Installation, Testing &

1 Commissioning for above rated motor & of following Material of Construction: M.O.C :- Casing : CI,

Impeller : SS CF8M, Wearing ring & bearing bush : Bronze, TC Mechanical seal, CS/SS bearing, SS

shaft with sleeve, SS strainer & MS motor body, Fasteners : SS 316L, Guide Rail : SS 316, Lifting

Capacity of pump - 9875 lpm & 22 m. head (55 kW/ 75 HP) - 1 working + 1 standby - Ex. 210 LL CWS

at Dungra WTP to 50 LL CWS at Karwad Zone 1 HW

Capacity of pump - 4451 lpm & 39.5 m. head (45 kW/ 60 HP) - 2 working + 1 standby - At 50 LL CWS

at Karvad to 10 LL ESR at Zone 1 3.00 Set 791602.00

Capacity of pump - 3778 lpm & 40.5 m. head (37 kW/ 50 HP) - 2 working + 1 standby - At 50 LL CWS

at Karvad to 10 LL ESR at Zone 2 3.00 Set 701761.00

Item No. 2: Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded (Above 400mm) M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest revision/ ammendment for following thickness outside

diameter at VpMC store or site anywhere in Gujarat State including Lowering, laying, jointing &

welding in correct position to correct line & level M.S.Pipe with outside & Inside lining/Epoxy paint

on pedestal or chairs upon prepared or prepared bedding in trenches the rates include conveyance

from store to site of work loading, unloading conveyance to Department stores, stacking etc.

complete including all taxes, insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading conveyance to Departmental stores, stacking etc. all complete.

323.9 mm Dia. (5.6 mm Thick)

2a 610 mm Dia. (6.3 mm Thick) 5.00 Rmt 7211.05

2b 219.1 mm Dia. (4.5 mm Thick) 60.00 Rmt 1932.40

2c 508 mm Dia. (6.3 mm Thick) 18.00 Rmt 6000.05

Item No. 3 : Butter Fly Valve : SITC of Electrcally Gear operated ISI mark CI D/F Butterfly

Valve as per IS 13095, PN 1.0 with sleeve of EPDM & disc, shaft & internal parts of SS 410 along

with gaskets and all other necessary hardware etc. of following diameter including all taxes,

3 insurance, transportation, freight charges, Inspection Charges loading unloading, conveyence to

pump house stacking, security etc. complete as per IS and Specification.

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 4 : Reflux Valve : Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and diameter including Lowering, laying & jointing in position

following Reflux Valve including cost of all labour, jointing material, including nut bolts and giving

4 satisfactory hydraulic testing etc. complete. including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete.

Item No. 5 : Air Cushion Valve with Cast Iron Body : Providing, supplying, lowering & laying C. I. Air

cushion valves of approved make & quality of following class and diameter including Lowering,

laying & jointing in position following Air Valve including cost of all labour, jointing material,

including nut bolts and giving satisfactory hydraulic testing etc. complete. including all taxes,

5 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking and including cost of all labour, jointing material

including nut bolts and giving satisfactory hydraulic testing etc. complete.

150 mm Dia. : Class-15 Nos. 107282.75

Item No. 6 : Supply, installation, testing & commissioning of flange ends Expansion Bellow as per

EJMA standards of overall length of minimum 300 mm, designed for 15 mm axial compression and

mm axial extension with tie rods etc. of following MOC & pressure ratings.

6 MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

300 mm Dia. : PN

Item No. 7 : MS Specials - Manufacturing, Supply, Delivery of M.S. Specials from MS plate of 5.6 mm

thick confirming to relevent IS including all taxes, duties, insurance, transformation, freight,

7 octoroi, inspection, loading, unloading,convey to site,stacking etc. compete.

Flanged Ended 3280.00 kg 98.00

Item No. 8 : Design, Supply, Installation, Testing, Commissioing of Bourdon Type Presuure Guage,

+1& accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 case

with Bayonel Type Bezel, SS316 L Bourdon Tube, SS316 movement material, Aluminium dial with

8 black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out

disc, shatter proof glass, SS tag plate as per IS 3624. - 0 to 1 Kg/cm2.

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 9 : Full Bore Electromagnetic Flow Meter- Regular Power operated: Design, Supply,

Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc

complete as per following specifications:

1. Flow Meter / Sensor : DC pulsed type, IP 68 Protection, Flanged process connection as per IS

1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor,

SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ Hard

Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil

9 Housing with Junction Box, CS flanges.

2. Flow Transmitter / Converter (Remote Field Mounted) : Microprocessor based, Modular design,

line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy

at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status

output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU

finish with glass window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for

sensor to transmitter communication etc. alongwith wall mounted/ stand mounted cabinet.

Item No. 10 : EOT Crane : Providing & erecting single girder type fully electrically operated E.O.T

crane with elecrically operated hoist, class II duty, geared travelling trolly with seven mts. Lift

complete with long travel rail track (40 mm sq.bar), moving or cross girder, all three motions

10 electrically operated by suitable rating motor IP 54, control panel & down control block, brake,

safety device, cables from motor to starter panel & other required accessories & tested as per IS

Specifications. - Span - 9.00 m, travel - 12 m. & Lift - 10 m.

2 Tonnes capacity 1.00 No 480187.50

10a 3 Tonnes capacity 1.00 No 534187.50

11 Item No. 11 : Nuts and Bolts MOC: SS 80.00 Kg 300.00

12 Item No. 12 : Slab Cutting: Slab to be cut by diamond cutter blade 8.00 Job 15000.00

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 13 : 11 kV Two Pole Structure Assembly:

SITC of 11 kV double pole 9 meter high structure made of 6" X 3" 'I" section girder, 4" X 2" channels,

clamps, nuts, bolts, stay wires

including earthing system with following accessories duly connected with ACSR conductors as per

approved drawing & in compliance

with requirement of IEC.

(a) 11 kV, 200 A drop out fuses with Synthetic Resin Bonded Paper (SRBP) tubes: 1 Set (01 piece per

(b) 11 kV, 400 A G.O.D. switch complete with earth switch, insulators, operating handle with

galvanised pipe, square bar: 1 Set.

(c) 11 kV lightning arrestor with clamps: 3 Nos.

(d) 11 kV Disc Insulators (70KN): 3 Nos.

(e) 11 kV Pin Insulators (5KN): 3 Nos.

(f) 20 mm dia. GI Stay Sets Complete: 2 Set.

Item No. 14 : Transformer : SITC of outdoor type, three phase, oil immersed, distribution

transformer of required KVA & voltage ratio, copper double wound, vector group - Dyn11, HV delta

connected & LV star connected with neutral brought out connected to provide separate earthing

terminals, bushing / cable box on HV side and cable box on LV side suitable for cables or bus duct as

per requirement with standard fittings, conforming to IS: 1180 (Part-1) / 2014 with its latest

amendment including first fill of transformer oil & following accessories.

(a) Oil conservator with filling holes with cap and prismatic oil level gauge. (b) Silica Gel

dehydrating breather charged with silica gel (c) Oil drain cum sampling valve with plug (d) Oil filter

valve (e) Lifting Eyes / Hooks / Lugs (f) Two earthing terminal (g) Diagram and rating plate (h) Air

release plug (i) Explosion vent with diaphragm (j) Thermometer pocket (k) Four bi-directional plain

roller with base channel with hauling holes (l) Fixed / Separate type radiator banks (m) Off circuit

14 externally operated tapping switch (For rating < 1000 kVA) (n) 100 mm stem type oil temperature

indicator (For rating < 500 kVA) (o) Bucholtz relay with shut off valve (For rating ≥ 500 KVA) (p)

mm dial type oil temperature indicator with Alarm / Trip contact (For rating ≥ 500 kVA) (q) 150 mm

dial type winding temperature indicator with Alarm / Tip contact (For rating ≥ 1000 kVA) (r)

Marshalling box (For rating ≥ 500 kVA) (s) 150 mm dia. magnetic type oil gauge (For rating ≥

kVA) (t) Inspection cover & Jacking lugs (For rating ≥ 1600 kVA)

For transformer having oil storage capacity for 2000 liters and higher, nitrogen injection fire

protection system (NIFPS) is to be provided.

With off circuit tap changer +10% to -10% in steps of 2.5%

315 KVA Capacity Transformer - Eff. Level-2

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 15 : Transformer Foundation : Casting of transformer plinth/foundation includeing oil soak

pit (where required) in reinforced cemente in M 20 using granite, quarzite trap metal of size 6 mm

for RCC work including providing of 53 grade cement & Fe 415 grade TMT bars, scaffolding,

15 centering, form work, curing etc. complete.

Transformer Rating (kVA): 315 kVA

Plinth Dimensions (L x W x H): 1250x1250x 1500 2.00 Set. 30000.00

Item No. 16 : Costruction of wire fencing for 11 KV switch yard : Providing and fixing 1.20 Metre

high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire

16 weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

Item No. 17 : Providing and Laying best quality gravel bed inside the wire fencing compound as per

requirement. 2.50 Cum 2029.00

Item No. 18 : Providing, Fabricating, Fixing / Installing Mild Steel Wicket Gates of 2 m x 2 m size as

18 per design with operating handle etc. complete

size 2m x 2m: 1 No. 1.00 LS 28661.00

Item No. 19 : LV MCC Panel with DOL / Star Delta / ATS / Micro processor based soft starter: SITC

of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection -

IP 52 as per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with

instrumentation compartments accomodating LED type indicating lamps, control contactors as per

IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air insulated

electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker-

microprocessor based Air Circuit Breakers (electrically operated drawout type)/ air break fixed type

MCCB with trip free mechanism, current limiting type as per IS: 8828, Motor Contractor (as per type -

2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary feeders

19 as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable

boxes, cable gland, incoming & ougoing cable connection for 1100V grade, Aluminium/ Copper

conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring

using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable

compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall

be fabricated from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness of various

members shall be as follows: Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members /

Doors: 2 mm and Internal Partitions: 1.6 mm.

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM,

19a Analogue Ammeter, SPP, Timer etc.

55 KW each outer feeder for (1W + 1SB feeder) 2.00 No. 60143.00

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM,

19b Analogue Ammeter, SPP, Timer etc. :

45 KW each outer feeder for (2W + 1SB feeder) 1.00 No. 208429.00

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM,

Analogue Ammeter, SPP, Timer etc. : 37 KW each outer feeder for (2W + 1SB feeder) 1.00 No. 189972.00

Item No. 20 : Incomer of MCC Panel :

Supply, installation, testing and commissioning LV Distribution Board (LVDB) totally enclosed, dust &

vermin proof, indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base

frame / channel / gland plates, 2.0 mm for load bearing members / doors & 1.6 mm for internal

partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable for operation on 3- Phase,

Wire, 415 V, 50 Hz, Neutral effectively grounded, with instrumentation compartments accomodating

meters, aux / protective relays, LED type indicating lamps & control MCBs as per IS: 13947, current &

voltage transformers as per IS: 2705, air insulated electrolitic grade Aluminum / Copper bus bar for three

phase & neutral system, GI earth bus for entire length, power / control wiring using 1100 V grade, FRLS

insulated copper conductor wires conforming to IS: 694 & 8130, equipment fittings, horizontally running

busbar compartment height of minimum 300 mm, incoming & ougoing cable connections for 1100 V grade,

20 Aluminium / Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable. LVDB shall have

required incomming / bus coupler / outgoing modules of following type & ratings.

-Above 250 A, upto & including 400 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with

trip free mechanism, current limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C

& E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all

necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus

Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:-

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), TM release

-Above 400 A, upto & including 630 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2

with trip free mechanism, current limiting type with Thermal Magnetic/ Microprocessor release (O /C, S /

C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all

necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Outgoing(s), shall

have enclosure dimensions- 600 (H) x 600 (W) x 600 (D) & following technical features:

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), TM release

Item No. 22 : SITC of Local Control Station with pendant type Open_Stop_Close pushbutton set and

with Open, Close, Trip & Local / Remote Indicating Lamps complete with Enclouser, necessary

mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote

operation, etc. as per IS and specifications (including structural steel) 8.00 Nos. 6924.00

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 23 : LV APFC PANEL: Supply, installaton, testing & commissioning LV APFC panel

consisting of required capacitor banks for continuous duty to improve P.F. 0.85 to 0.99 in required

steps enclosed in dust & vermin proof compartment, indoor type, fabricated from CRCA sheet steel

with minimum thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing

members / doors & 1.6 mm for internal partitions, minimum degree of protection - IP 42, busbar

chamber, required size of Al bus bar / terminals, minimum 10 stage APFC relay, metering,

indicating lamps, push buttons complete as per IS: 16636-2017 with latest ammendment & detailed

technical specification and data sheet as under.

Up to 50 KVAR capacity: APFC panel consisting following items.

23 a) 125 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals & rotary handle b) 0-125 A

range analogue ammeter of 96 x 96 mm size with selector switch c) 3 nos. 125 / 5A, 10 VA CL-1.0

cast resin type current transformer d) Suitable rating MCCB / MCB &Contactors for each capacitor

bank e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil,

internally delta connected with built in internal fuses complete with discharge resistances &

terminal cover) of approoved make in required steps with well suited detuned reactor is placed in

series with each capacitor step. (e.g. 50 KVAR capacity will be provided in steps of 2 nos x 5 KVAR,

2 nos x 7.5KVAR & 2 nos x12.5 KVAR). f) Enclosure dimensions: 1600 (H) x 1150 (W) x 600 (D)

Above 50 & up to 100 KVAR capacity: APFC panel consisting following items.

a) 250 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals & rotary handle b) 0-250 A

range analogue ammeter of 96 x 96 mm size with selector switch c) 3nos. 250 / 5A, 10 VA CL-1.0

cast resin type current transformer d) Suitable rating of MCCB /MCB & Contactors for each

capacitor bank e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB /

23a non toxic oil, internally delta connected with built in internal fuses complete with discharge

resistances & terminal cover) of approved make in required steps with well suited detuned reactor

is placed in series with each capacitor step. (e.g. 100 KVAR capacity will be provided in steps of

nos x 5 KVAR, 2 nos x 10KVAR, 2 nos x 15 KVAR & 2 nos x 20 KVAR) f) Enclosre dimensions: 2100 (H)

Item No. 24 : 11kV(Earthed /Uneartheda) Grade Cable- Aluminium Conductor: Supply, laying,

testing & commissioning 11 / 11 kV (UE) grade, XLPE insulated, stranded Aluminium conductor,

galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty

24 cable (to be laid on wall surface with necessary clamps / in existing cable trench / cable trays / m

conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-

2) & IEC: 60502(Part-2), of following sizes:

3 Core 240 sq mm - For 11 KV DP structure to Trasformer 50.00 1261.00

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 25 : Cable Terminations / Jointing Kits for 11 kV (UE) grade XLPE Cable: Providing &

fitting heat shrink cable termination / jointing kits for 11 kV (UE) grade XLPE insulated cable

including necessary earth connectivity connection, material & consummables making the

termination/ joint complete ensuring the joint resistance is within the permissble limit as per IS, of

following types & sizes:

Outdoor terimination kit suitable for: 240 to 400 sq mm 3 core 2.00 11487.00

Item No. 26 : 1.1k Grade cable-Aluminium/Copper Conductor:

Supply, laying , testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip/ round wire armoured, extruded PVC type ST2 sheathed,

26 heavy duty (to be lad on wall surface with necessary clamps/in existing cable trench / cable trays/

conduit/ pipe sleeve at road crossing or floor as per site requirement) conforming to IS: 7098 (part-

26g 4 Core 6 sq mm 100.00 m 78.00

26h 4 Core 4 sq mm 50.00 m 70.00

26i 4 Core 4 sq mm 50.00 m 70.00

Item No. 27 : Cable Glands: Providing & fitting heavy duty brass cable glands (nickel-plated) with

washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes:

27 Double Compression Brass Cable Glands:

3.5 Core 300 sq mm

27e 3 Core 70 sq mm 4.00 No. 270.00

27f 3 Core 50 sq mm 2.00 No. 240.00

27g 4 Core 6 sq mm 4.00 No. 107.00

27h 4 Core 4 sq mm 8.00 No. 107.00

Item No. 28 : Cable Terminals (Lugs): Providing and fitting crimping type cable termination (Lugs)

conforiming to IS of following types and sizes:

Aluminium Tubular Terminals (Long Barrel)

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 29 : Earthing: Supplying & erecting Funnel type earthing having earth plate of following

size burrid in specifically prepared earth pit 3 m below groung with 40 kg charcol & solt with

alternate layers of charcol & solt , 20 mm dia GI pipe wuth funnel with a wire mesh for watering &

brick masonary block CI cover complete as per para 7.3 of IS 3043 with necessary length of double

29 GI/copper earth wirw No.6 SWG bolted with lug to the plate & covered in 12 mm dia GI pipe 2.5 mt.

long complete connected to the nearest switch gear with ends socket as per direction & duly tested

by earth tester conforming to IS (As per Drawing) with following specifications.

With 45 X 45 X 0.35 cms CI earth plate

With 60 X 60 X 0.315 cms Copper earth plate - For Transformer Body, Neutral & 11 KV DP Structure

Item No. 30 : Cable Tray & Accessories: Supply & laying GI ladder type cable trays with side

channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size - 35 x15 x 15 mm spaced at

250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot

dipped galvanized after fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as

30 coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware

etc, erected on existing support as per specification and instruction of Engineer-in-charge.

300(W) X 100(H) X 2.0 mm Thick

Item No. 31 : Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

-for earthing of Transformer, LT Pannel board, Motors, etc. using necessary clamps. 850.00 Kg. 77.17

Item No. 32 : Supplying rubber matting of following thickness as per IS:15652/IEC 61111. - 4 mm

Thickness. 21.00 Sq.m. 1017.00

Item No. 33 : Providing and erecting metallic vitrified danger notice board as per language

33 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Item No. 34 : Providing and fixing printed instruction chart both in English and Gujarati and duly

34 framed with front glasses, for treatment of person suffering from Electric shock with minimum 50"

diagonally size. 5.00 No 129.06

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 35 : Supplying stand first AID box with antiseptic cream, medicine for use on wounds due

burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid adhesive tape for

medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of

standard makes) 2.00 No 297.00

Item No. 36 : Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I.

sheet with extra handle at bottom duly painted white in side and Red out side with FIRE mark, filled

with dry-sand and kept on existing stand provided or hung on wall hook.

Item No. 37 : Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30 mm X 30 mm X 4 mm angle iron

with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead an

dtwo coats of approved enamelled silver paint. 2.00 No 933.43

38 Item No. 38 : Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. 2.00 No 212.00

Item No. 39 : CCTV Camera Syatem

Supply of high quality images in low light condition IP based PTZ Dome Camera with smart auto

tracking ,Optical Zoom, digital zoom, HD CMOS, 120db WDR, camera shall be with 200 Mt IR, seven

39 alarm inputs, 2 outputs, Smart tracking modes: Manual/ Panorama/ Intrusion trigger/ Line crossing

trigger/ Region entrance trigger/ Region rectified with Installation of necessary accessories with

High End Professional Display for 24x7 Operation - 400/500 nits Brightness

Item No. 40 : Ultrasonic type level transmitter with remote display:

Design, Supply, Installation, Testing and Commissioning of Non Contact Ultrasonic Type Level

Transmitter with Remote Display.

The sensor should be non contact type, field mounting type, housing shall have minimum IP65

protection, PP/ PVC Sensor MOC, with sensor to transmitter cable.

40 Remote Indicator cum Transmitter:

Microprocessor based indicator with LED / LCD digital display,panel/ wall mounting type, power

supply shall be 110-240 Vac or 15 to 36 Vdc, 50 Hz ± 10 %.

Accesories: Mounting bracket, nut, bolts etc as per system requirement and Hook up diagram of the

Size: 0 to 10 Meter

Item No. 41 : Supply, installation, testing and commissioning of Pressure Transmitter with Micro-

processor based integral LED/LCD display along with, manifold valve, required fittings, tubing (all

41 valves, fittings, tubings, etc. shall be in SS 316 only) all accessories, hardware, etc. complete in all

respects as per specifications and having following measurement ranges:

Range : 0 to 10 or o to 20 Kg/cm2 (On Main Header) 4.00 Nos. 29147.00

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 42 : Float/ Displacer Type Level Switch

Design, Supply, Installation, Testing and Commissioning of Top mounted Displacer Type level

switches with 2 nos SPDT contacts of Micro switch rated 5 A, potential free power supply, Material

of wetted parts shall be SS 316 and the material of accessories shall be SS. IP 65 or equivalent

42 degree of protection for enclosure, suitable for sump, ESR, tank, vessels and underground

reservoirs. The top mounted level switches shall be supplied with still tubes to suit the

requirement. . Accessories like name plate, mating flange, gaskets, fasteners, bolts & nuts, etc.

shall be supplied with the Level Switch.

Range: 0 to 5 Meter

Item No. 43 : PLC SCADA SYSTEM

Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with Local

SCADA system comprising of min. 21” PC, CPU:

i7, 16 GB RAM, 1 TB SSD and monitor to display all the valves in the network and their positions with

colour coding.console with A4 size laser jet printer for report / alarm printing, SCADA run time

display software, 4G / 5G GSM modem, provision of future connectivity at VpMC office SCADA,

creation of software to poll between the all Karvad headwork locations to SCADA Server, get exact

position details, send command for changing position, received command for position achieved and

shutoff etc. Instrument Control Panel (PLC Enclosure / Panel ) with necessary PLC based logic and

wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no. analog signal

multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF

batteries alongwith battery charger, cabling between UPS and battery and all other accessories as

per standard), etc. complete in all respects and as per specs IO list shall include - power supply

availability, motor healthy, starter operating, position of the valve etc. A network switch is required

at each of the all Karvad headwork locations. This will ensure that the signal communcation from

the remote SCADA System can be done using wireless communication between central SCADA/PLC to

field RTU having gateway with SIM card. Enclosure shall be IP 54 or better and shall be placed at

central location proposed by Department. The PC shall also have back up software for PLC. All

licenced software to be provided. All work shall be carrierd out complete in all respects and as per

tender specifications.

PLC/RTU Panel for Field Location

Supply, Installtion, Testing & Commissioning of PLC/RTU panel including PLC, Gateway with SIM

Card for remote operation and monitoring of Flow, Pressure and Valve parameters.

Minimum 8DI, 4 DO, 1RS485 communication shall be considered.

43a Real time communication with central SCADA shall be consiered for operation and monitoring from

Panel Shall be IP65 with Local indication and push button for Local operations of valve. UPS with

battery backup of 30 minutes shall be provided in the panel.

20 meter Power Cable from 415 supply nearby shall be considered upto PLC/RTU panel.

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 44 : INSTRUMENT CABLE & ACCESSORIES

Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument

Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores

The unit rate shall include

a. Supply, loading & unloading of the cable at site from store.

B. Shifitng of cable from site store to place of installation.

c. Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the

d. Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks

and other necessary civil material for laying cables outside the building.

e. Testing and submission of sketches & reports of all the cables laid.

POWER CABLE- 3C x 4 sq.mm.

44a CONTROL CABLE- 8C x 1.5sq.mm. 80.00 Mtr. 145.00

44b SIGNAL CABLE- 1P x 1.5sq.mm. 80.00 Mtr. 127.00

Item No. 45 : CABLE END TERMINATION AND CONNECTION

'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and

crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in

45 specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for

cable size and type mentioned above. The job also includes earthing the glands and armour of the

cable with common earth bar or flexible copper mesh as applicable.

Power Cable -3C x 4 sq.mm. 145.00

45a Control Cable -8C x 1.5 sq.mm. 40.00 Nos. 135.00

45b Signal Cable - 1P x 1.5 sq.mm. 40.00 Nos. 115.00

Item No. 46 : Instrument Cable Tray

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate

46 / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary

support(included) as per Specification and as per instruction of engineer in charge.

50 X 50 X 1.6 mm Thick

Item No. 47 : Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as

per table9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size

mm to 20 mm for RCC work, including scaffolding centering, formwork, needle vibrated

47 consolidation, curing complete up to 6 meter depth or height (excluding cost of reinforcement and

neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than

water retaining (Below G.L) 12.00 Cum 7795.85

SCHEDULE - B3 : SUPPLYING, ERECTING, TESTING & COMMISSIONING OF PUMPING MACHINERIES

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

ITEM DESCRIPTION QTY. UNIT RATE (RS.) TOTAL AMOUNT (Rs.)

Item No. 48 : Supplying cutting, bending, binding and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only

including lift up to 6 meter height or depth below G.L. for all diameters

TOTAL OF SCHEDULE - B3 (Rs.)

SUMMARY (SCHEDULE-B)

KARVAD WATER SUPPLY PROJECT (PHASE-2)

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING, LOWERING, LAYING

AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING OF PUMPING MACHINERIES,

HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC WORK OF INSTRUMENTATION WORK & SCADA

SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2), WORK INCLUDING 5 YEARS OF OPERATION & MAINTENANCE

FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SCHEDULE - B4 : HEADWORK DEVLOPMENT WORK

(Head work Development, Compound wall, Security Room, RCC Road/Approach Road, Electrification Work etc. at HW)

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.1: Construction of compound wall of brick masonry including all civil works with labour and material cost as per rate analysis and

as shown in drawing. Work including excavation for column footing in all type of strata. Providing and laying of 100 mm thick PCC in M10

grade of concrete and 750x750x200 mm thick RCC column footing,230x230x2.85 mt. height RCC column in M20 grade of concrete. 100 mm

thick PCC providing and laying for ground level beam in M10 grade, 230x350 mm RCC Ground level beam and 100 mm thick RCC coping at

top on the compound wall in M20 grade of concrete. all RCC work including formwork, curing, steel cutting, binding etc completed.

mm thick x 1.5 mt. height from top of ground level beam in 1:6 cement mortar Brick wall constructing by using common burnt building

bricks having crushing strength not less that 35 Kg/Cm2. 20 mm thick sand faced cement plaster on walls up to height 1.5 metres above

1 ground level consisting of 12 mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8 mm thick finishing coat of C.M. 1:1 (1Cement :

Sand ) etc. complete. water proofing cement paint of on wall surfaces (Three coats) to give an approved brand etc. completed. Providing

and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontal lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Meter etc. completed as per

minimum BoQ and tender drawings.

Compound Wall 195 Rmt.

Item No.2: Construction of RCC roads / approach Road Reinstatement of roads with RCC where pipe crossing the asphalt road / RCC road /

industrial area / residential area. the Work including excavation, dressing, formwork, curing etc. completed and making a base for road,

2 100 mm thick PCC in M10 grade of concrete, and Providing and laying 150 mm thick RCC M15 grade concrete, Providing TMT bars FE-415

reinforcement for RCC work including bending, binding and placing in position complete.

2a Approach to HW Site 700 Sq.m 963.16

Item No.3: Designing (aesthetically) and constructing security room cum quarters with Minimum 15 % opening for ventilation wooden door

and windows of aluminium section and window grill of iron should be provided. The quarter should be provided with toilet block and

3 bathroom facilities etc. complete with all basic amenities. Stair for approach to terrace should be provided. As per typical design

Item No.4: Providing and Fixing of 4 mt. x 2 mt. height MS Gate with 1 mt. width wicket gate made from 50 mm X 4 mm thk MS Pipe,50

mm x 5 mm MS flats, Channels and Flats including all Material & labour for fabrication, welding, cutting, hoisting, fixing of position and

4 Painting two coats (excluding priming coat ) on new steel and other metal surface with synthetic enamel paint and fixing at site of work

including carting, loading, unloading etc. complete. - 1 no's.

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.5: Electrical Item like wiring, points, lighting arrangements, fans, street lights etc. for security room/material safety room/staff

5 quarter room/ street light at Rcc road etc.

Total for Schedule-B3 (Rs.) =

SUMMARY (SCHEDULE-B)

KARVAD WATER SUPPLY PROJECT (PHASE-2)

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING, LOWERING,

LAYING AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING OF PUMPING MACHINERIES,

HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC WORK OF INSTRUMENTATION WORK & SCADA

SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2), WORK INCLUDING 5 YEARS OF OPERATION &

MAINTENANCE FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SCHEDULE - B5: CONSTRUCTION OF HOUSEHOLD CONNECTIVITY (8085 Nos.)

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.1: Providing and supplying in true line and level 15mm Dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings

1 make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge.

Item No.2: Providing and supplying in standard length ISI mark rigid unplasticized PVC pipe suitable for portable water with ring

fit joint incl cost of ring, as per IS specification no 4985/1988 incl all local and central taxes, transportation, freight charges,

2 octroi, inspection charges, loading, unloading, conveyance to the departmental store and incl cost of jointing material etc 220.00 Rmt 139.00

Item No.3: PVC fittings : Purchasing and supplying at store or site of work G.I./P.V.C. Specials as per requirement incl. Railway

freight, loading, unloading, stacking, and carting from store to site. Sales tax, insurance, octroi, GST & all taxes etc. complete.

3 UPVC Couplers 15 mm Dia. 32164.00 No. 5.00

3a UPVC Couplers 90 mm Dia. 44.00 No. 78.00

3b Bib Tap 15 mm Dia. 8041.00 No. 25.00

3c PVC Flange with pail pieces 90 mm Dia 44.00 No. 236.00

3d Service Saddle 15 mm Dia. (110/90/75/63/50 mm × 15 mm Dia.) 8041.00 No. 50.00

3e Nut bolt 176.00 No. 40.00

3f UPVC Tee (Moulded) 8041.00 No. 20.00

3g UPVC Elbow 15 mm Dia. 32164.00 No. 6.00

3h UPVC Elbow 90 mm Dia. 44.00 No. 216.00

3i UPVC Clamp 8041.00 No. 10.00

Item No.4: Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and strutting if

required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up

4 to all required lead cleaning the site etc. complete for all lifts and strata as specified. 2895.07 Cu.m 102.35

Up to 0 to 1.5 Mt. Depth

In all sorts of soil and soft murrum

4a In hard murrum, boulders incl. macadam road. 10921.48 Cu.m 155.25

Item No.5: Lowering, laying, fixing and jointing PVC/UPVC/CPVC pipes and specials of following class and Diameter including

cost of conveyance from stores to site of works including cost of labour, material, cement solvent, giving satisfactory hydraulic

5 testing as per ISI code. Rate is taken for 63 mm and prorated for 15 mm 40205.00 Rmt 5.75

5a 90 mm Dia 220.00 Rmt 19.55

Item No.6: Refilling the pipeline trenches incl. ramming, watering, consolidating disposal of surplus stuff as directed within a

radius of 3 km.

7 Item No.7: Cutting of Road : C.C 1:2:4 or RCC 562.63 Cu.m 427.80

7a IPS Cutting 361.85 Cu.m 427.80

Item No.8: Providing and casting in situ mass cement concrete in 1:4:8 proportion using granite quartzite trap metal of size

8 mm to 40 mm including consolidation curing etc. complete. 924.41 Cu.m 3901.95

Item No.9: Making hole for Fitting saddle in to Existing pipe (110/90/63/50 mm) or New laying pipe. Lowering, laying and

9 jointing 110/90/63/50 mm × 15 mm Dia. Service Saddle including cost of labour, material, with cement solvent, giving 8041.00 No. 100.00

satisfactory hydraulic testing as per ISI code.

Total for Schedule-B4(Rs.)

Vapi Municipal Corporation

SCHEDULE - B6 : SITC WORK OF INSTRUMENTATION WORK & SCADA SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION

FOR KARVAD WATER SUPPLY

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.1: Supply, Installation, Testing and Commissioning of ISI mark CI D/F Sluice

Valve as per IS 14846 PN 1.0 with Electrically / Manually operated including non-

modulating type (ON/OFF operation only), Motorised valve shall be suitable for

underwater operation in case of flooding in the chamber(Min IP68 rated). Type of

valve, pressure of water, location and interface to be provided for correct valve

operation. valves can be modulating also, you can use for flow control. Non -

modulating are ON / OFF type only (Open / Close type) of following sizes with Integral

Starter, SS 304 seat rings, SS rising spindle with all hot dipped galvanised hardwares,

1 bolts, nuts & washers, gaskets and handwheel including all taxes, insurance,

transportation, freight charges, Inspection Charges, loading unloading, conveyence to

pump house, stacking, security etc. complete as per IS and Specification.

Lowering, laying and jointing C. I. / D/F Reflux valves, Butterfly valves, Sluice valves

and Air valves including cost of all labour, jointing material, including nut bolts and

giving satisfactory hydraulic testing, etc. complete.

150 mm NB (Electrically Operated)

1a 200 mm NB (Electrically Operated) 1.00 Nos. 4,63,862.30

1b 250 mm NB (Electrically Operated) 3.00 Nos. 4,72,212.90

1c 300 mm NB (Electrically Operated) 1.00 Nos. 4,78,348.15

1d 350 mm NB (Electrically Operated) 4.00 Nos. 4,91,601.30

1e 450 mm NB (Electrically Operated) 2.00 Nos. 5,22,710.00

1f 500 mm NB (Electrically Operated) 3.00 Nos. 5,70,394.75

1g 600 mm NB (Electrically Operated) 2.00 Nos. 6,14,500.05

1h 750 mm NB (Electrically Operated) 1.00 Nos. 6,55,624.85

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.2: Electromagnetic Flow Meter- Regular Power Operated- PN 10 :

Supply, installation, testing and commissioning of remote type Full Bore

Electromagnetic flow meter comprising of IP-68 Sensor SS304/ Metallic Alloy Flow

Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt

Grounding Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die

Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction

Box, CS flanges.

Flow Transmitter: Microprocessor based, Modular design, 2 line LCD for indication of

actual flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to

m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status

2 output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and Data

Logger, 20 meters cable length for sensor to transmitter communication etc.

alongwith wall mounted/ stand mounted cabinet.

Panel mounted flow indicator cum Totalizer along with all mounting accessories,

hardware, etc. complete in all respect and as per specs and shall have following size

measurement range. The scope also includes necessary connection with header pipe.

150 mm Nominal Bore

2a 200 mm Nominal Bore 1.00 Nos. 1,06,049.00

2b 250 mm Nominal Bore 3.00 Nos. 1,17,201.00

2c 300 mm Nominal Bore 1.00 Nos. 1,34,422.00

2d 350 mm Nominal Bore 4.00 Nos. 1,85,900.00

2e 450 mm Nominal Bore 2.00 Nos. 2,26,181.00

2f 500 mm Nominal Bore 3.00 Nos. 2,63,124.00

2g 600 mm Nominal Bore 2.00 Nos. 3,03,222.00

2h 750 mm Nominal Bore 1.00 Nos. 3,48,831.00

Item No.3: Design , Supply, Installation, Testing, Commissioing of Bourdon Type

Presuure Guage, +1& accuracy, Direct bottom 1/2" NPT (M) process connection, IP

Glycerine filled, SS304 case with Bayonel Type Bezel, SS316 L Bourdon Tube, SS316

3 movement material, Aluminium dial with black graduation on white background,

Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS

tag plate as per IS 3624. - 0 to 10 Kg/cm2.

100 mm Dial Size

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.4: Supply, installation, testing and commissioning of Pressure Transmitter

with Micro-processor based integral LED/ LCD display along with, manifold valve,

required fittings, tubing (all valves, fittings, tubings, etc. shall be in SS 316 only) all

4 accessories, hardware, etc. complete in all respects as per specifications and having

following measurement ranges:

Range : 0 to 10 or o to 20Kg/cm2 29,147.00

Item No.5: Construcion of RCC Valve Chamber including dewatering required. Damage

to existing pipe shall be made good as per original. Slope of chamber shall be such

that excess water shall be drained and taken to a local drain. Space for maintenence

5 shall be provided. (Chamber can be bigger. ensure rung ladders or similar is provided

for person to access the chamber etc.

Item No.6: Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop.

1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by

weigh batching) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC

work, including scaffolding centering, form work, needle vibrated consolidation,

curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat

6 finishing) with centering and shuttering/deshuttering etc. comp. for structure for

other than water retaining. Footing for column or foundation (with form work)

Panel Foundation for Field PLC/RTU Panel

Size : 1.8 m L X 0.8 m W X 0.5 m H (19 Location)

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.7: PLC SCADA SYSTEM

Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel

with Local SCADA system comprising of min. 21” PC, CPU:

i7, 16 GB RAM, 1 TB SSD and monitor to display all the valves in the network and their

positions with colour coding.console with A4 size laser jet printer for report / alarm

printing, SCADA run time display software, 4G / 5G GSM modem, provision of future

connectivity at VpMC office SCADA, creation of software to poll between the 19 nos.

Karvad locations to SCADA Server, get exact position details, send command for

changing position, received command for position achieved and shutoff etc.

Instrument Control Panel (PLC Enclosure / Panel ) with necessary PLC based logic and

wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no.

analog signal multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for

7 harmonic, suitable rating SMF batteries alongwith battery charger, cabling between

UPS and battery and all other accessories as per standard), etc. complete in all

respects and as per specs IO list shall include - power supply availability, motor

healthy, starter operating, position of the valve etc. A network switch is required at

each of 19 nos. Karvad location. This will ensure that the signal communcation from

the remote SCADA System can be done using wireless communication between central

SCADA/PLC to field RTU having gateway with SIM card. Enclosure shall be IP 54 or

better and shall be placed at central location proposed by Department. The PC shall

also have back up software for PLC. All licenced software to be provided. All work

shall be carrierd out complete in all respects and as per tender specifications.

PLC/RTU Panel for Field Location

Supply, Installtion, Testing & Commissioning of PLC/RTU panel including PLC,

Gateway with SIM Card for remote operation and monitoring of Flow, Pressure and

Valve parameters.

Minimum 8DI, 4 DO, 2AI, 1RS485 communication shall be considered.

Real time communication with central SCADA shall be consiered for operation and

monitoring from central SCADA.

Panel Shall be IP65 with Local indication and push button for Local operations of

valve. UPS with battery backup of 30 minutes shall be provided in the panel.

20 meter Power Cable from 415 supply nearby shall be considered upto PLC/RTU

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.8: POWER AND INSTRUMENT CABLE & ACCESSORIES

Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of

Instrument Cables, along with cable glands, lugs, cable trays, required junction

boxes, fittings and accessores as per specs.

The unit rate shall include

a. Supply, loading & unloading of the cable at site from store.

b. Shifitng of cable from site store to place of installation.

8 c. Fixing of cable clamps, brackets, supports, route markers etc. where ever required

to fix the cables safely.

d. Excavation, back filling and levelling of ground alongwith laying of fine sand,

protection bricks and other necessary civil material for laying cables outside the

e. Testing and submission of sketches & reports of all the cables laid.

Power Cable -3C x 4 sq.mm.

8a Control Cable -8C x 1.5 sq.mm. 950.00 Mtr. 145.00

8b Signal Cable - 1P x 1.5 sq.mm. 1140.00 Mtr. 127.00

Item No.9: CABLE END TERMINATION AND CONNECTION

'Supply, fixing, connection, testing and commissioning of double compression brass

cable glands and crimping type Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS complete in all respects. The glands

9 and lugs / sockets shall be suitable for cable size and type mentioned above. The job

also includes earthing the glands and armour of the cable with common earth bar or

flexible copper mesh as applicable.

Power Cable -3C x 4 sq.mm.

9a Control Cable -8C x 1.5 sq.mm. 190.00 No. 135.00

9b Signal Cable - 1P x 1.5 sq.mm. 285.00 No. 115.00

Item No.10: Instrument Cable Tray

Providing and fixing approved make Perforated C type cable tray. Made from sheet

steel. The cable tray should be single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max

10 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erection with necessary support( included) as per Specification and as

per instruction of engineer in charge.

50 X 50 X 1.6 mm Thick

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.11: Earthing: Supplying & erecting Funnel type earthing having earth plate

of following size burrid in specifically prepared earth pit 3 m below groung with 40 kg

charcol & solt with alternate layers of charcol & solt , 20 mm dia GI pipe wuth funnel

with a wire mesh for watering & brick masonary block CI cover complete as per para

11 7.3 of IS 3043 with necessary length of double GI/copper earth wire No.6 SWG bolted

with lug to the plate & covered in 12 mm dia GI pipe 2.5 mt. long complete connected

to the nearest switch gear with ends socket as per direction & duly tested by earth

tester conforming to IS (As per Drawing) with following specifications.

With 30 x 30 x 0.35 cms: C.I. earth plate 39.00 Each 2,295.78

Item No.12: Supply, erection, testing & commissioning of Cast Alu. Junction Boxes

aliong with all required hardware in GI, supporting structure, etc. complete in all

12 respects as per following:

10 Terminal Junction box (suitable for cable) 40.00 Nos. 3,500.00

12a 25 Terminal Junction box (suitable for cable) 40.00 Nos. 5,000.00

Item No.13: Cable Trench, Laying & Installation of Cable; Making cable trench in soft

soil of suitable width of 90cms deep for laying cable all over the run and back filling

13 the same and making the surface as normal ground as per IS & Specification.

(For laying cable in ground)

Item No.14: Cable Covering in Trench: Cable Covering with second class bricks or

cement tiles laid cover the cable crosswise & also on both side with covering of

14 7.5cms. Layer of sand above & below cable (16 bricks per meter.) as per IS &

(For cable in ground) 190.00 Mtr. 139.37

Item No.15: Supplying rubber matting of following thickness as per IS:15652/IEC

4 mm Thickness. 38.00 Sq.m. 1,017.00

Item No.16: Providing and erecting metallic vitrified danger notice board as per

16 language suggested by engineer incharge for MEDIUM VOLTAGE installation to be

erected as per IS-2551. 19.00 No. 69.13

Item No.17: Providing and fixing printed instruction chart both in English and

17 Gujarati and duly framed with front glasses, for treatment of person suffering from

Electric shock with minimum 50" diagonally size. 19.00 No 129.06

Item No.18: Supplying stand first AID box with antiseptic cream, medicine for use on

wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage

18 (Band-aid adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or

similar) etc. (All above contents shall be of standard makes) 5.00 No 297.00

SR. TOTAL AMOUNT

SR. TOTAL AMOUNT

ITEM DESCRIPTION QTY. UNIT RATE (RS.)

Item No.19: Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets

19 confirming to IS 2171 1985 and complete erected with necessary clamps made from

x 6 mm M S Flat with nuts and bolts grouted in wall complete. [A] For 5 Kg Capacity

Total for Schedule-B6(Rs.) =

SUMMARY (SCHEDULE-B)KARVAD WATER SUPPLY PROJECT (PHASE-2)

KARVAD WATER SUPPLY SCHEME: WORKING SURVEY, SOIL INVESTIGATION,DESIGN OF WATER SUPPLY SCHEME.WORK INCLUDING PROVIDING, SUPPLYING, LOWERING,

LAYING AND JOINTING DI PIPELINE FOR GRAVITY DISTRIBUTION NETWORK & RISINGMAIN PIPELINE, PROVIDING, SUPPLING, ERECTING & TESTING OF PUMPING

MACHINERIES, HEADWORK DEVELOPMENT AT VARIOUS ZONE, CONSTRUCTION OF HOUSE CONNECTION & RCC ROAD REINSTATEMENT & SITC WORK OF INSTRUMENTATION

WORK & SCADA SYSTEM AT GRAVITY DISTRIBUTION NETWORK LOCATION ETC. FOR KARVAD WATER SUPPLY SCHEME (PHASE-2), WORK INCLUDING 5 YEARS OF

OPERATION & MAINTENANCE FOR VAPI MUNICIPAL CORPORATION,DISTRICT: VALSAD.”

SCHEDULE-C: OPERATION & MAINTANANCE (FOR 5 YEARS)

Description Qty Unit Rate Amount

ITEM NO.1: Comprehensive Operation and Maintenance of Rising Main and Gravity Main distribution

pipeline network. This system includes Elevated Storage Reservoirs, Headwork Development, House

Connectivity, SITC work of Instrumentation work & Scada System at Gravity Distribution Network to ensure

reliable water distribution and other allied works. This also involves the integration of essential

mechanical, instrumentation, and electrical components, alongside headwork to enhance water

management efficiency including

1) Breakdown Maintenance or Emergency Maintenance,

1 2) Day to day Maintenance 1 Per Year 36,13,015.46

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or Special repairs and replacement including Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of Manpower but excluding electric power (The

electrical bill for power shall be paid by the municipality) . The O & M work shall be carried out as per

detailed specifications in the tender & maintaining the record for the same.

Comprehensive Operation and Maintenance of Rising Main and Gravity Main distribution pipeline network.

This system includes Elevated Storage Reservoirs, Headwork Development, House Connectivity, SITC work

of Instrumentation work & Scada System at Gravity Distribution Network to ensure reliable water

distribution and other allied works. This also involves the integration of essential mechanical,

instrumentation, and electrical components, alongside headwork to enhance water management efficiency

1) Breakdown Maintenance or Emergency Maintenance,

2) Day to day Maintenance

1a 1 Per Year 37,93,666.23

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or Special repairs and replacement including Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of Manpower but excluding electric power (The

electrical bill for power shall be paid by the municipality) . The O & M work shall be carried out as per

detailed specifications in the tender & maintaining the record for the same.

SCHEDULE-C: OPERATION & MAINTANANCE (FOR 5 YEARS)

Description Qty Unit Rate Amount

Comprehensive Operation and Maintenance of Rising Main and Gravity Main distribution pipeline network.

This system includes Elevated Storage Reservoirs, Headwork Development, House Connectivity, SITC work

of Instrumentation work & Scada System at Gravity Distribution Network to ensure reliable water

distribution and other allied works. This also involves the integration of essential mechanical,

instrumentation, and electrical components, alongside headwork to enhance water management efficiency

1) Breakdown Maintenance or Emergency Maintenance,

1b 2) Day to day Maintenance 1 Per Year 39,83,349.54

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or Special repairs and replacement including Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of Manpower but excluding electric power (The

electrical bill for power shall be paid by the municipality) . The O & M work shall be carried out as per

detailed specifications in the tender & maintaining the record for the same.

Comprehensive Operation and Maintenance of Rising Main and Gravity Main distribution pipeline network.

This system includes Elevated Storage Reservoirs, Headwork Development, House Connectivity, SITC work

of Instrumentation work & Scada System at Gravity Distribution Network to ensure reliable water

distribution and other allied works. This also involves the integration of essential mechanical,

instrumentation, and electrical components, alongside headwork to enhance water management efficiency

1) Breakdown Maintenance or Emergency Maintenance,

1c 2) Day to day Maintenance 1 Per Year 41,82,517.02

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or Special repairs and replacement including Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of Manpower but excluding electric power (The

electrical bill for power shall be paid by the municipality) . The O & M work shall be carried out as per

detailed specifications in the tender & maintaining the record for the same.

SCHEDULE-C: OPERATION & MAINTANANCE (FOR 5 YEARS)

Description Qty Unit Rate Amount

Comprehensive Operation and Maintenance of Rising Main and Gravity Main distribution pipeline network.

This system includes Elevated Storage Reservoirs, Headwork Development, House Connectivity, SITC work

of Instrumentation work & Scada System at Gravity Distribution Network to ensure reliable water

distribution and other allied works. This also involves the integration of essential mechanical,

instrumentation, and electrical components, alongside headwork to enhance water management efficiency

1) Breakdown Maintenance or Emergency Maintenance,

1d 2) Day to day Maintenance 1 Per Year 43,91,642.87

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or Special repairs and replacement including Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of Manpower but excluding electric power (The

electrical bill for power shall be paid by the municipality) . The O & M work shall be carried out as per

detailed specifications in the tender & maintaining the record for the same.

Total for Schedule-C (Rs.)