Development of distribution infrastructure at Idukki district of Kerala under Dhyuthi 2.0 Idukki Special Package for 2024-25 under turnkey basis

Dead End Clamp Assembly ( Anchoring Assembly) for Covered Conductor Up to 95 Sq.mm

Suspension Clamp Assembly for Covered Conductor Up to 95 Sq.mm

IPC Connector -Bare to Covered Conductor

Insulation Piercing Connector - Main: 16 sq mm to 95 sq mm; Tap : 16 sq mm to 95 sq mm

Covered CONDUCTOR ACSR Rabbit (XLPE INSULATED)

CROSS ARM GI CHANNEL 100X50 mm 3 M

RMU 11kV 630 A CTC(E) + DA-(CCV+ +DA) or (RRL + +DA)

Cable End Termination Kit 11 kV XLPE 3c x 300 Sq.mm -Heat Shrinkable (Outdoor)

UG cable 11kV 3X300 mm2 XLPE Aluminium (Armoured)

Pole A Type GI 11 M

Cable Straight Joint Kit 11 kV XLPE 3c x 300 Sq.mm -Heat Shrinkable (Outdoor)

Pipe GI 40 mm dia -2.5 m Length( Earth Pipe)

Earth Chamber (PVC) With RCC Covering Slab

Earth Connector 95 Sqmm

Crimping Socket Palm Type 50 Sq.mm -Al(Cable Lug)

G.I.WIRE. 4MM (8 SWG)

Bolt & Nut GI of various sizes

Stay Insulator Porcelain 11k V

Anchor Plate 200 x 200 x 8 mm GI (HT Stay Plate GI))

STAY TIGHTNER HT

Stay Wire 7/8 (7/3.15mm) GI (HT Stay Wire)

Stay Rod (Anchor Rod) GI 20 mm dia (HT Stay Rod)

Helically formed Guy-Grip HT

Thimble GI 75 mm x 22 mm x 40 mm ,1.5 mm Thickness (For HT and LT)

UG Cable Route Marker HT

POLE A TYPE 12 M

Lightning Arrester 11kV Polymeric insulator without Structure

Pipe HDPE 125 mm

Pipe GI 150 mm dia

Coupling for GI Pipe 150 mm dia

Air Break Switch (AB Switch) 11kV 400 A , Composite Polymer Housing

Channel cross arm GI 75 x 40mm -2.4 mt

Pole PSC 9 M

COMPOSITE PIN INSULATOR 11 kV with Pin

V cross arm -GI -11 kV

Clamp GI for V cross arm

Pole Top Bracket -F Type GI -11 kV

Conductor ACSR Raccoon

Hardware Fittings 11kV B&S Type

Disc Insulator 11 kV Composite Polymeric

Channel cross arm GI 75x40 mm- 1.8 M

Cleat GI for 11kV Disc insulator

Earthing Coil GI 115 Turns 50 mm internal Dia dia

Pin Insulator 11kV Composite Polymeric

CROSS ARM GI CHANNEL 4 LINE (4 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

CROSS ARM GI CHANNEL 2 LINE (2 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Stainless Steel Strap [20 mm x 0.7 mm]

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 120 sq.mm

Suspension Clamp Assembly for HT AB Cables up to 120 sq.mm

MVT Kit for HT ABC (3 Nos)

Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase Aerial Bunched Cable

Cable Tie UV Plastic Heavy Duty 500 mm Length

PIN INSULATOR 415V SET(WITH PIN)

SHACKLE INSULATOR 415V SET(WITH STRAP BOLT&NUT)

Conductor ACSR Rabbit

Pole PSC 8 M

Cable 1.1kV XLPE AL 1c X 95 sq mm (Un Armoured)

Covered Conductor -11kV 99 Sq.mm AAAC

Stay Insulator Porcelain 415/240 V

Clamp GI for LT Stay for Angular location

Anchor Plate 200 x 200 x 6 mm GI (LT Stay Plate GI))

STAY TIGHTNER LT

Stay Rod (Anchor Rod) GI 16 mm dia (LT Stay Rod)

Stay Wire 7/12 (7/2.5 mm) GI (LT Stay Wire)

Distribution Transformer 11kV/ 433 V 100 kVA 3 phase ONAN

MVT Kit For HT ABC

Anchoring / Dead end Clamp Assembly for LT AB Cables up to 70 sq.mm (Insulated Messanger up to 50 sq mm)

Aerial Bunched Cable LT 3x70 + 1x16 + 1x50 sq.mm (Insulated Messenger)

Suspension Clamp Assembly for LT AB Cables up to 70 sq.mm

V CROSS ARM GI SET(WITH CLAMP BOLT&NUT)

Disc insulator 11 kV composite polymeric - covered conductor

Hardware fittings for 11kV covered Conductor 99 sq mm

Cable end termination kit-for 99 Sq.mm HT Covered conductor-Heat Shrinkable (Outdoor)

Mid span joint for 99 sq.mm Covered conductor

Insulation Piercing connector Bare to covered conductor

FUSE DROP OUT 11 kV

Distribution Box LT Outdoor 2 Way -415 v, 200 A-With Aluminium Main Busbar 40 x10 mm and Aluminium Inter connecting Bus bar 25x10 mm (Without Fuse Unit) Stainless Steel Sheet Shell 18 Guage-With CBN

Insulation Piercing Connector for Covered Conductor -Main 50-150 Sq.mm,Tap 50-150 Sq.mm ( For ACSR Covered Conductor)

Hardware Fittings-GI-for HT covered conductor 120 Sq.mm

Pre-Insulated Midspan Joints and Terminal Lugs 95 Sq.mm

IPC FOR ABC 3X95+1X70+1X16 Tap 1.5-10 sqmm

Aerial Bunched Cable LT 3x95 + 1x70 + 1x16 sq.mm (Insulated Messenger)

Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase HT Aerial Bunched Cable

Cable End Termination Kit - For 70 Sq.mm HT Covered Conductor-Heat Shrinkable ( Out Door)

Suspension Clamp Assembly for LT Covered Conductor -Up to 70 sq.mm

Insulation Piercing Connector( IPC) -Main 16 to 70 Sq.mm; Tap 16 to 70 Sq.mm

Distribution Transformer 3 Phase 160 kVA 11kV/433 V ONAN (1 Star Rated)

Distribution Transformer 3 Phase 250 kVA 11kV/433 V ONAN (3 Star Rated)

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 150 sq.mm (Insulated messanger 95 to 120 sq mm)

Aerial Bunched Cable HT 3x150 + 1x120 sq.mm (Insulated Messenger)

End Termination Kit HT ABC 1c x 120 Sq.mm

Item Wise BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Stringing one km LT 3ph 4 wire line XLPE Insulated ACSR Rabbit or equivalent) incl. fitting cross arm etc. removing touchings and conveyance of materials.

RMUs with two nos load break switches & one VCB

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Additional rate for excavating trench on tarred/concrete surface of specified size.

Fitting one set AB switch and giving connection

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Doing Horizontal drilling along/across the roads ,pulling 125mm HDPE pipe duct drawing 3*300 mm2 XLPE UG cable through the HDPE duct (including surveying the site for other utilities cable /pipes including making test pits)

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Additional rate for excavation of Pit for A type pole in Soft Rock.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Providing Strut using LT PSC pole incl. digging & back filling pit.

Providing Cable Tie

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing Stay for LT poles incl. digging & back filling pit.

Doing outdoor/indoor cable termination of 3x300 mm2 11KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket

Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Conversion of one km LT Sph 2 wire to 3ph 4 wire line incl. dismantling existing 2 conductors, stringing 3 Rabbit & 1 Weasel incl. conveyance.

Insertion of one LT PSC pole in existing 3ph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Providing Fly stay for LT pole using LT PSC pole incl. digging & back filling pit.

Renewal of existing damaged/old LT PSC/RCC (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.

Renewal of existing damaged/old LT PSC/RCC (3ph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Insertion of one LT PSC pole in existing Sph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Re conductoring one km LT Sph 2 wire OH old line with new XLPE insulated Rabbit/Covered conductor incl.conveyance of materials

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Providing additional HT stay insulator in existing stay.

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Additional rate for excavation of Pit for A type pole in Laterite.

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Renewing damaged PSC/RCC Transformer DP structure with new A type Transformer DP and re-erecting all accessories & Transformer (excluding renewal of pipe earthing).

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Renewal of existing damaged/old 11kV Stay with new stay in place incl. excavation & backfilling of pit and conveyance.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Rate for Re conductoring one km LT 3 phase 4 wire oh line with 4 new XLPE insulated ACSR Rabbit or equivalent conductor incl. conveyance of materials .( E+ I)

Installation of Pre-insulated straight through joints for 16sqmm cable

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Stringing one km LT 1ph 2 wire line XLPE Insulated ACSR Rabbit or equivalent, incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing of 1.1 kV Ariel bunched cable XLPE insulated of size 3 x 95 (For Phase)+ 1 x 70 (insulated messenger nuetral) + 1X16 (street light) sqmm

Erecting one 160kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 250kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Stringing of 11 kV Aerial bunched cable of size 3 x 150 + 1 x 120 sqmm with bare/insulated Messenger through existing poles

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )