General Fund

Cutting the Open CC road surface with concrete saw cutter and removal with breaker including stacking the ueful material . The rate including labour charges for cutting, all incidental charges, etc., complete as directed by the departmental officer in charge of the work

Earthwork in excavation for Pipe line as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. Manual means 30%

Mechanical means 70%

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Manufacture, Supply, & Delivery of 110MM dia HDPE Pipeline 6 Kg/Cm2 conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 110MM dia HDPE Pipeline 6 Kg/Cm2

Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete 110MM dia HDPE Pipeline 6 Kg/Cm2

Inter connection charges for cutting the existing main (315 HDPE / 160HDPE/110 PVC) lines including necessary earth work excavation Dewatering and providing Inter connection with the newly laid HDPE distribution lines using necessary specials issued by Department testing the line and refilling the strench using excavated soils from the banks of the trenches complete as directed by the Departmental officer incharge of the work.

Restoration of CC Road with M20 Nominal mix using 20 mm graded metal with machine mixing . The rate including cost and conveyance of all materials and labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work, but excluding seigniorage cahrges

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc. complete ISI marked.