Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹27.9 L+₹64,013 (2.35%)Rejected-AOC 200 NAVAGAM NAVAGAM TA SAYLA SURENDRA NAGAR GUJARAT 363430 | SURENDRANAGAR | GUJARAT | 363430 | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹28.8 L+₹1.6 L (5.94%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 4 | L4₹30.6 L+₹3.3 L (12.2%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹59,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
REPAIRS TO B R WORKS AND WELCOME MAINT OF OFFR AND JCO OR MD ACCN AT MIL STN GANDHINAGAR
2023_MES_597503_1
GE(A)/GNR/TOKEN/08 of 2023-24
Open Tender
Civil Works
Item Rate
270 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GE ARMY GANDHINAGAR
₹59,000
Yes
20 Jul 2023
22 May 2023
16 Jun 2023
22 May 2023
14 Jun 2023
2 Jun 2023
22 May 2023 - 31 May 2023
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed by Engineer-in-Charge..
M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge..
M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge..
M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge..
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge..
M&L for rendering cement plaster 12mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..
M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..
M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed by Engineer-in-Charge..
M&L for two coats of Acrylic distempe over one coat of 1mm thick wall care putty ( Make : Birla/JK White) base on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed by Engineer-in-Charge..
M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge..
M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified
S&F of 20 mm outer dia CPVC elbow ( 3/4 x 1/2) with brass thread at one end for fixing of taps etc and other end plain complete all as specified
S&F of 20 mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified
Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed by Engineer-in-Charge..
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed by Engineer-in-Charge..
Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed by Engineer-in-Charge..
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed by Engineer-in-Charge..
S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed by Engineer-in-Charge..
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge..
S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge..
S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed by Engineer-in-Charge..
S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed by Engineer-in-Charge..
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed by Engineer-in-Charge..
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed by Engineer-in-Charge..
Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed by Engineer-in-Charge..
M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4, type B-l as required, superficial area not exceeding 150 sq. cm including necessary scaffolding, if required complete all as specified and directed by Engineer-in-Charge..
M&L for rolled mild steel angle iron work as in door frames,,cooler stand etc drilled for fixing of hinges/necessary welding work as for site requirment etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed by Engineer-in-Charge..
Resecuring or easing & adusting without taking down of shutters exc 1.0 Sqm and n.exc 2.0sqm and adjusting with out taking down
S&F, factory made solid panel PVC door shutter 30 mm thick (style) any colour consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed by Engineer-in-Charge..
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm any colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed by Engineer-in-Charge..
S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed by Engineer-in-Charge..
S&F, in repairs, 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, including necessary side liping fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed by Engineer-in-Charge..
Supply only Novopan pre-laminated particle Board 6 to 9 mm thick suitable for Aluminium Door/partition complete all as specified and directed by Engineer-in-Charge..
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed by Engineer-in-Charge..
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed by Engineer-in-Charge.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed by Engineer-in-Charge..
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed by Engineer-in-Charge.
S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250 mm and fixed complete all as specified and directed by Engineer-in-Charge..
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed by Engineer-in-Charge..
S&F 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor
S&F in repair 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge..
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/wooden beading complete all as specified and directed by Engineer-in-Charge..
Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S & F 3 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed to steel window with glass putty complet all as specified and directed.
S & F 3 mm thick figured glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane.
S&F, 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed by Engineer-in-Charge..
Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each including making good disturbed surface of Jamb, soffit etc complete all as specified and directed by Engineer-in-Charge..
Taking down Aluminium doors/window/ventilator of any size & description complete all as specified and directed by Engineer-in-Charge.
Taking down aluminium door shutter from frame exceeding 1.0 Sqm but not exceeding 2.0 Sqm and re-fixing in same opening after repair of parts such as ie clip, easing, rubber beads, greasing/oiling and including replacement of components ie middle rail, top rail and handle complete with locking arrangement, tower bolt and push handle for smooth functioning complete all as specified and directed by Engineer-in-Charge. NOTE: The unit quoted rate inclusive with replacement of any spare parts for required for smooth functioning and not any claim entertained on this account excluding door floor spring / door closer.
Taking down of Steel window shutter and refix the same after necessary repair work like welding, etc including replace of any type of MS hinge etc.
S&F Powder coated aluminium frame for doors,windows, ventilators & partition work with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.30mm (section No 20621), bottom size 92x31.75x1.30mm (section No-20620) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4mm thick glass (any shade) with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.
M&L Aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 68.85x31.75x1.30mm (section No 20681), bottom size 68.85x31.75x1.20mm (section No 20619) and shutter top & bottom of size 40x18x1.29 mm (section No-20844) and sides (handle) of size 40x18x1.29mm (section No-20846) and lock side shutter frame of size 40x18x1.29 mm (Section No 20845) with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including 4mm thick glass any shade with necessary rubber beading gasket etc all as specified. Make:-Indal/ Jindal/ Hindalco.
S&F aluminium powder coated (requried colour to match window colour) grill of 5 mm dia squares rectangular triangular circular shape aperture n.exc 5 cm in length or width fixed with H or F channel.
S&F in repair four levers SS mortice lock, vertical type size 100 mm (as per sample) complete all as specified and directed by Engineer-in-Charge..
Supply only SS Mortice lock, four lever, verticle type, size 100mm (as per sample) complete all as specified and directed by Engineer-in-Charge..
Supply only cast iron body hydraulic door closer hydrualically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge.
S&F in repair only cast iron body hydraulic door closer hydrualically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge..
Supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge..
S&F in repair only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge..
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing and finishing the surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge..
M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors and finishing the top surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..
M&L for 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed by Engineer-in-Charge..
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge..
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.
M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge..
M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge..
M&L for light shade Virified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed of CM 1:6 complete all as specifide and directed.
M&L for light shade Virified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed by Engineer-in-Charge..
M&L for glazed ceramic coloured tiles any coloured / shed of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge..
M&L for heavy duty, exterior grade parking tiles (Durastone of Somany/Endura of Jhonson or equivalent as approved by GE) of area of each tiles exc 0.08 Sqm and not exc. 0.18 sqm as in floor surfaces etc, set,jointed and pointed in neat cement slurry with white cement and pigment over and including screed bed or bedding layer of 15mm thick cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge..
M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge..
Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge..
S&F in repair 25mm dia, 1mm wall thickness stainless steel heavy duty curtain rod with decorative ball type side brackets supporting hook etc (as per sample) fix with wooden gutties complete all as specified and directed by Engineer-in-Charge..
S&F 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet/cupboard (with shelves and partitions) including necessary fittings & fixtures like auto closing concealed hinges, 75mm long fancy type SS Handle, magnet catch etc as per manufacturer's instructions complete and taking out old board of cabinat all as specified and directed.
S & F 15X20X4 Inch stainless steel kitchen basket with stainless steel wire perforate plate fabricated and stainles steel telescopic drawer chanel with ball bearing soundless complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge..
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge..
S&F,in repair SS, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed by Engineer-in-Charge..
S&F in repair CP Sink Cock (wall mounted) With long Swivel Spout with Wall flange. Cat No-F1015251 of Cera or equivalent.
S&F in repair CP Swan Neck pillar tap with left/right hand operating knob Cat. No. F2014104 of Cera or equivalent.
S&F in repair CP Pillar Cock high neck Cat. No. F2014103 of Cera or equivalent
S&F in repair CP Bib Cock 2 in 1 with single handle and wall flange Cat. No. F2014163 of Cera or equivalent.
S&F in repair CP Bib Cock long body with wall flange Cat. No. F2014152 of Cera or equivalent.
S&F in repair CP Angular Stop Cock with wall flange Cat No.F2014201 of Cera or equivalent.
S&F in repair CP Concealed Stop Cock With Adjustable Wall Flange (15mm) Cat F2014361of Cera or equivalent.
S&F in repair CP Wall Mixer With Provision For Overhead Shower With Bend Pipe Cat. No. F2014401 of Cera or equivalent.
S&F in repair CP Wall Mixer (3-in-1) With arrangement for both telephonic hand Shower and overhead shower with bend pipe Cat. No. F2014403 of Cera or equivalent.
S&F in repair Hand shower 70mm dia with wall hook and 1.5 mtr hose complete all as specified and directed by Engineer-in-Charge.. Cat No-F7030315AB of Cera or equivalent.
S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed by Engineer-in-Charge..
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, Stainless steel, Soap dish holder complete all as specified and directed by Engineer-in-Charge..
S&F, in repair pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed by Engineer-in-Charge..
Supply only pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed by Engineer-in-Charge..
S&F, in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-Charge.
Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.. Note- The water tank etc shall be contractor's supply.
Supply, hoisting, fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including dismantling of old PVC/AC tanks of 1000 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.. Note- The water tank etc shall be contractor's supply.
S&F in repair Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
S&F in repir Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed by Engineer-in-Charge..
S & F in repairs chromium plated with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S&F, in repair, stop cock (angular type) with wall flange complete all as specified.
S & F in repair Bib taps long body cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete.
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, Grating, square, 150x150mm (with/without waste hole) size of SS heavy duty complete all as specified and directed by Engineer-in-Charge..
Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge..
Supply only PVC waste pipe 32mm bore of size 800 mm long complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed by Engineer-in-Charge..
Supply only 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed by Engineer-in-Charge.. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
Supply only vitreous china pedestal suitable for WHB.
S&F, in repair, jet spray with 1.50m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed by Engineer-in-Charge..
S&F in repair health faucet with 1.0 mtr brass flexibile tube and wall hook mounted type chromiun plate for EWC.
S&F, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) and 'S' or 'P' trap & necessary PCC required basis complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed by Engineer-in-Charge..
S&F, in repair kitchen sink without drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 495 mm x 420 mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge..
S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge..
S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge..
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge.
S&F, in repair, 0.63 mm thick, stainless steel plate rack of size 24x36x10 inch complete all as specified and directed by Engineer-in-Charge..
M&L for prepration of new/old surfaces of ceilling and applying one coat of Acrylic distemper complete all as specified and directed by Engineer-in-Charge..
M&L for prepration of old surfaces of ceilling and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge..
Labour for Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour incl necessary scaffolding complete all as specified and directed by Engineer-in-Charge..
M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed by Engineer-in-Charge..
M&L for preparation of surface and applying one coat of Acrylic distemper with roller on old treated sufrace of wall etc all as specified and directed.
M&L for applying two coats of Acrylic distemper with roller on treated/untreated sufrace of wall etc all as specified and directed.
M&L for preparation of old treated surface of wall and applying one coat of cement base paint complete all as specified and directed by Engineer-in-Charge..
M&L for preparation of old treated surface of wall and applying two coat of cement base paint complete all as specified and directed by Engineer-in-Charge..
M&L for preparation of old treated wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint compete all as spcified and directed.
M&L for preparation of old treated steel surface of any description exceeding 10 cm widht or girth and applying one coat of synthetic enamel paint complete all as specfied and directed.
S&F in repair Two piece wall hung extended EWC of size 645x350x700mm with seat cover and cistern with twin flush fittings Cat No- S1031103,S1060103 (Cistern),B1520184 (Campbell),B18101106 (Flush fittings) white colour for Cera or equivalent.
ARTI CONSTRUCTION
Shree Builders
ALBA AC AND REF SERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .