GE/KHU-33/2021-2022 SPECIAL REPAIR TO BUILDING No T-09 OF COMPO PL AND T-06 OF EME AND ADDITION/ALTERATION OF CENTRAL TOILET BLOCK OF EME AT KHUMBATHANG IN THE AOR OF AGE B/R-I KHUMBATHANG, UNDER GE KHUMBATHANG

Amount

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nainital patterns roof covering complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Demolition of brickwork or stone/boulder/ PCC block masonary built in cement mortar or cement lime mortar including all quoins,arches,pillars,etc including ashlar facings dressed stonework and precast concrete articles and precast concrete block walling complete all as specified.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely complete all as specified.

M&L for precast cement concrete block masonry with solid block exc. 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in CM 1:4 complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in floors and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Glass dividing strips of size 38mm width of strip and 3mm thick complete all as specified complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floors complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed base or bedding layer 20 mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completecomplete, all as specified and directed

M&L second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints, etc. complete all as specified.

S&F for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old Steel surfaces Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of primer complete all as specified.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut , four on bolt plate and two on staple plate and fixed complete all as specified.

S&F 125mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S&F MS pressed handles cast type anodized of size 125mm complete all as specified and directed.

S&F MS barrel tower bolts of extruded section fixed 125mm long complete all as specified and directed.

M&L for taking down plastering on lathing (other than wire netting ) without removing lathing in cement lime or cement mortar complete all as specified.

M&L for rendering CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces surface even and smooth without using extra cement complete all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and fair without using extra cement upto 4 storeys building complete all as directed and specified.

M&L for preparation of newly plastered or unplastered surface and applying three coat of white wash on walls complete all as specified.

M&L for prepartion of new plaster surface & applying two coat of cement base paint over one coat of primer on wall complete all as specified.

M&L for hacking out old broken (any thickness,size,quality or description) glass from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed by Engr-in -charge.

S&F Sheet glass 3mm thick ordinary quality, in squares exc 0.5 sq. m each pane fixed with glazing pins/spring clips complete all as specified and directed by Engr-in-Charge.

S&F 0.63 thick Galvanised,corrugated mild steel sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts and washers in roof walls etc with grade of zinc coating complete all as specified.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughtout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/blankets,any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantling in fillets,posts,rafters,purlins etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.

M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete all as specified.

M&L 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in wall complete all as specified.

M&L second class soft wood plain fillets,square or rectangular in section of area exc 13 and n exc 25 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood plain fillets,square or rectangular in section of area exc 6 and n exc 13 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood but bullnosed,splayed,chamfered or rounded on one edge or face fillets, in section of area exc 3 and n exc 6 sqcm clean sawn secured with nails or brads complete all as specified.

M&L second class soft wood but bullnosed,splayed,chamfered or rounded on one edge or face fillets, in section of area n exc 6 sqcm clean sawn secured with nails or brads complete all as specified.

Dismantling water tanks of capacity exc 500 ltrs but n exc 1000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 1000 Ltrs capacity triple layered (cylinderical/vertical with closed top) hoisted and fixed in position, inside or outside the building, including minor repairing to iron pipe for making connections and securing access cover complete all as specified and directed.

Dismantling water tanks of capacity exc 1000 ltrs but n exc 2000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 2000 Ltrs capacity triple layered (cylinderical/vertical with closed top) hoisted and fixed in position, inside or outside the building, including minor repairing to iron pipe for making connections and securing access cover complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm bore pipe complete all as specified and directed.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 20mm bore pipe complete all as specified and directed.

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F in repair Stop valve , cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, all as specified.

S&F in repair Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore, all as specified.

S&F in repair 15mm stop valve, fancy chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm all as specified.

S&F in repair 20mm gun metal or gate valves with iron wheel head screwed both ends for iron pipes and fixed complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F vitreous china white wash basins, angle back type of size 400mmx400mm including brackets, cutting for and pinning the ends of brackets or erecting stands including 32mm bore dia waste coupling of PTMT ( Half or full threaded) ,(minimum weight 32 mm-45mm-60gms) with 32 mm High density polyethylene pipes (HDPE) of pressure rating 6kgf/cm² fixed complete to walls in floors complete all as specified.

S&F in repair 15mm Pillar taps, fany type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks fly-nuts, screwed for iron pipe and fixed

S&F in repair Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest,including connection to trap,and to flushing pipe, anti-syphonage pipe, and jointing to PVC/CI bend and flush pipe complete including making good to floor including provision of lime concrete bedding complete all as specified & directed.

S&F 10 Litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed.

S&F prepainted galvanised aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 and finishing surfaces even & rough to receive toping layer etc. complete all as specified & directed.

M&L Prepration of old plastered surfaces washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint, complete all as specified.

M&L for glazed and skelton shutters 25mm thick 2nd class hard wood open rebated and prepared to receive glass, gauge etc divided into squar with plain,chamfered or rounded mitred and rebated sash bars any numbers sizes of me-mbers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for glazed and skelton shutters 35mm thick 2nd class hard wood open rebated and prepared to receive glass gauge etc divided into squar with plain,chamfered or rounded mitred and rebated sash bars any numbers for window complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc. 0.50 sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing erviceable tiles to store and rubbish off the premises complete all as specified.

M&L 25mm thick cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate and finishing the surface even and smooth without using extra cement complte all as specified.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor tiles complete all as specified.

M & L Glazed ceramic tiles coloured (350x200x7mm/ 450x300x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified.

Supply and fixed in repair stainless steel Squatting Pan '' Orissa pattern '' Size 580 x 480mm white , integral front or back iinlet in foot rest ( Excluding flusing cistern and flush pipe ) including provn of lime cincrete bedding in making good to floor complete all as specified and directed by Engr-in-Charge.

S & F in repairs vitreous china wash basin, flat back, size 550 x 400 mm including waste pipe , brackets, CP brass waste fitting and cutting for & pinning in ends of brackets or errecting stand but excluding taps, chain and plug, etc. complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing 15mm bore and connections in new or old position to walls, ceiling, floors, etc. complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing 20mm bore and connections in new or old position to walls, ceiling, floors, etc. complete all as specified and directed by Engr-in-Charge.

Demolition of drain pipes of any description, jointed in cement mortar and taking out of trenches if required for internal dia of pipe upto 75/110 mm including all fittings (Tee, Bend, branch piece etc.), all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F cast iron trap 'P' or 'S' for 100 mm bore of pipe complete all as specified and directed.

S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S&F PVC (SWR) bends any dia & 75mm bore and fixed all as specified and directed by Engr-in-Charge.

S&F in repairs, aluminium anodised, tubular towel rail, 20mm dia, D type, 60cm long between flanges, all as specified and directed by Engr-in-Charge.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms), etc. all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep as in foundation etc, or for shafts, wells, cess pits, manholes and sewage lines etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed .

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed .

Removing excavated material to a distance n.exc 50m and depositing where directed at level n.exc 1.5m above the starting point,complete all as specified and directed .

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc. complete all as specified and directed by Engr-in-Charge.

M&L cement concrete type C1, 1:3:6 (20mm graded aggregate) as in cills, copings, bed plates, blocks for hold fasts, etc & similar work including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and directed by Engr-in-Charge.

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes all as specified.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-

(a) One light point/ one fan point/ Bell Point controlled by one switch

(b) One 3 pin socket outlet, 5 Amp independent point complete.

All as per item No 88 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth on independent board all as specified and directed.

Supply and Fixing switch piano flush button type 6 Amp single pole one way complete all as specified and directed.

Supply and Fixing switch socket combination multi purpose, 3 Pin 6 amp flush type complete all as specified and directed.

Supply and Fixing ceiling rose three terminal pvc/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply only lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and directed by Engineer-in-Charge.

S & F in switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Engineer-in-Charge.

S&F in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED light fitting mirror type 2 ft long 10 watt ,220 V AC decorative type with driver holder including LED lamps and connecting upto flexible copper conductor of suitable size and complete all as specified and directed by Engineer-in-Charge.

S & F in replacement pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts complete for 12 way complete all as specified and directed.

S & F in replacement pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts complete for 8 way complete all as specified and directed.

Taking down metal Enclosure(DB 06/10 way),single Phase 240 Volts ,double door from the site by unscrewing complete including fittings such as MCB's and refixing again after completion of wiring at the same location carefully , Complete all as specified & directed by Engr-in-charge.

M&L in repair for MCB single pole, 6 to 40 Amp 240 volt C curve 10 KA, IP 20 complete all as specified and directed incl taking down old one.

M&L in repair for MCB single pole & neutral 240 volt C curve 10 KA 40 Amps capacity IP 20 complete all as specified and directed incl taking down old one.

S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair two run run of single core 6 Sqmm for Sub Main wiring with copper conductor multistranded FR PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sqmm copper conductor complete all as specified and directed. (Note - Two runs of 6 Sqmm cable, one run of 6 Sqmm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

M&L for earthing complete with galvanized steel earth plate electrode 600 x600x6.0mm thick, buried directly in ground(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtrs below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts,nuts, and galvanized iron or steel all as shown on electrical plate No.03 of SSR Part-1 connected to earthing test point all as specified or indicated including earth work in any type of soil, charcoal salt 15cm around the earth plant,40 mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix ) cover reinforced with XPM (weighing not less than 4 kg/sqm) with suitable steel handle,and angle iron 40x40x6 mm frame and chamber of pcc (1:3:6) type C-0 (including earth work in any type of soil,removal of surplus soil to a distance n. exe. 50 m), as shown in electrical plate No. 3 of SSR Part-I, 20 mm dia watering pipe light grade 1.70 mtr long with plug at top, GI protection pipe light grade 15 mm dia from earth pit to main boad including testing after completioncomplete all as specified and directed. Note:- (i) Maximum length of GI wire, protection pipe with each earth pit shall not exceed 7.5 mtrs. (ii) The 20 mm dia watering pipe shall be 20 cm above the ground level and be provided with 20 mm dia GI plug at its top and no concrete watering pit/cover shall be provided.

Deduct Credit for Demolished/Dismantled material Rs (-) 52,403.25 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S HAJI MOHD ALI