Annual Plan-2024-25 Pala Municipality-133/25 Engineering wing Building Completion-General Civil Work

Amount

OFFICE BUILDING COMPLETION

OD354085/2024-2025:Data - DSR 2023 - 9.168: Providing and fixing cupboard/shelf/workstation/drawers/partition/tables/similar items with 18 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with regular cabinet/cupboard hinges, locks, drawer channels, sliding arrangements etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing regular cabinet/cupboard hinges, locks, drawer channels, sliding arrangements etc. shall be paid separately)

OD354083/2024-2025:Data - DSR 2023 - 9.169: Providing and fixing cupboard/shelf/workstation/drawers/partition/tables/similar items with 18 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand with regular cabinet/cupboard hinges, locks, drawer channels, sliding arrangements etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing regular cabinet/cupboard hinges, locks, drawer channels, sliding arrangements etc. shall be paid separately)

OD354082/2024-2025:DSR 8.28.1 : Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :Decorative veneer facings of approved manufacture

OD356676/2024-2025:DSR 9.7.3.2 : Providing and fixing panelling or panelling and glazing for partition/doors using Ply wood 5 ply, 9 mm thick Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type.Decorative plywood one side decorative veneer and commercial veneer on other face (type 1) conforming to IS 1328 BWR Type

9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.

OD323031/2024-2025:Providing and Fixing Zebra Blinds with fabric of approximate thickness of 0.4 mm with top and bottom Channel of NonRusting Aluminum Alloy.Control Unit should be of ABS plastic shall be driven by a ball chain pulley on the left /right side as per the requirements. Bottom rail to be made up of powder coated aluminum tube having minimum weight per running meter required for a Perfect fall of fabric to avoid warpage/floating

9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

9.119:Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.

9.140.1:Providing and fixing plain lining with necessary screws/nuts/& bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge ( Frame work shall be paid for separately)12 mm thick commercial ply conforming to IS: 1328 BWR type

9.95.7:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x3.2 mm

9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.90.2:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

9.91:Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.

9.100.2:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

9.114.1:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type

21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

OD358676/2024-2025:Suplying and fixing acrylic name board with approx: size 75*120 cm including lettering, fittings etc complete

OD358677/2024-2025:Suplying and fixing acrylic name plates with approx: size 30*18 cm with insertion of name slips inside acrylic/stainless steel groves including lettering etc complete

OD358682/2024-2025:Providing and fixing aluminium C or E channels (medium duty ) with rollers & stop end.

17.31:Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

OD358698/2024-2025:Supplying fixing and installing acrylic solid/liquid type with illumination or metallic box type letters as per approved design by the Engineer in Charge.

OD358702/2024-2025:Supplying and fixing metallic box type letters as per approved design by the Engineer in Charge.

Pradeep R (BID ID -2056275)

Bidder Name

Pradeep R

FASIYA P D