8820 REPAIRS TO CEILING, TILING, ROOF SHEETING AND MISC B.R WORKS IN TECH AREA AT AF STATION, BAREILLY

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

M&L for steel work in tubular trusses, posts etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 all as specified and as directed.

M&L for mild steel plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified

M&L for double charged, vitrified tiles, coloured, first quality of size 600x600mm, 9 to 10mm thick as in Floors/ skirting, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by GE.]

M&L for glazed digitally printed ceramic tiles of size 300x600mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.

M&L for 18-20mm thick Granite work of colour Ruby red/ Telephone black/ Jade black (table rubbed and polished) in window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed

M&L for 100mm thick cement concrete PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base for flooring/ hard standing all as specified.

M&L for River sand filling under floors or in foundations including watering and consolidation all as specified. [Note: Thickness after consolidation shall be considered for payment]

Supply and laying 60mm thick machine pressed coloured precast concrete M-35 grade, interlocking Paver Blocks, PVC mould reflective type conforming to IS - 15658 of any shape and size with grey cement and pigment complete all as specified and as directed.

M&L for pre-polished coloured chequered cement concrete tiles of size 300x300mm, 25mm thick, set, jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5 sq.m. but n. exc. 4 sq.m. each all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5 sq.m. each all as specified.

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame section 91.85 X 31.75 X 1.30 mm, section No. 8758 for top and sides rails and 91.85 X 31.75 X 1.20 mm for bottom rail, section No. 8687. (ii) Shutter for top, bottom and side rails 40 X 18 X 1.50 mm, section No. 8820. (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearing section No. 4407 and necessary handles, tower bolt etc. as directed. (iv) Stainless steel wire cloth (v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vi) Locking arrangement and providing Namda rope to make the frames air tight.

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles, SS friction hinges etc. complete all as specified and as directed. [Note: Panel inserts like glass & gauge shall be measured & paid separately]

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) door shutters, aluminium section weighing not less than 1.00 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and as directed. [Note: 1. Weight of builders hardware & rubber beading shall not be considered for payment, however rate quoted shall be deemed to be included for the same. 2. Panel inserts like glass, pre-laminated particle board & gauge shall be measured & paid separately]

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. complete all as specified and as directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F 5.50 mm thick sheet glass (tinted/ reflective type) of any size complete fixed to aluminium frames

S&F 5 mm thick toughened glass for window/ ventilators etc. of any size complete fixed to aluminium/ wooden/ metal frames

S&F 12mm thick pre-laminated particle board, interior grade, pre-laminated on both sides with decorative choice lamination, fixed with screws to timber frame work all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads

S&F Mortise lock, brass vertical type, size 65mm, 2 levers all as specified

S&F in repairs 25mm dia curtain rod mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs oval type vitreous china counter wash hand basin of size 560x400x205mm, under counter type, including cutting for and pinning in ends of the brackets complete all as specified and as directed. [Model S2030103 of make Cera or equivalent in Jaquar/ Hindware]

S&F in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work.

M&L for providing and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225: 1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (Part-4), fire performance as per BS:476 (Part 6&7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518 : 1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sq.m including both sides) comprising of main T runners of size 24x32mm of length 1200mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sq.m) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall/ partition with the help of plastic rawl plugs at 450 mm c/c and 40mm long dry wall S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.

S&F 12mm thick toughened glass as in doors / windows one side fully/ partly etching in design/ logo/ letters as directed, complete including necessary fittings like stainless steel pivot hinges, brackets, stainless steel handles etc as required complete all as directed. [Make of stainless steel hardware: Dorma/ Hardwyn/ Hettich, Make of glass: Modiguard/ Saint Gobain/ Asahi]

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F Neoprene/ EPDM rubber gasket for aluminium joinery complete all as directed

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white, single piece with integral vitreous china ware flushing cistern, soft closing PVC seat cover, fixing bolts etc complete all as specified and directed. [Model: C890446 BLAZE of make: Parryware or equivalent in Hindware/ Jaquar]

S&F in repairs 15mm dia two way bib cock cast copper alloy fancy type chromium plated with wall flange complete all as specified and as directed.

S&F in repairs 15mm dia two way angle cock cast copper alloy fancy type chromium plated with wall flange complete all as specified and as directed.

S&F in repairs vitreous china table top thin rim wash hand basin of size 550x400x140mm complete all as specified and as directed. [Model S2020137 of make Cera or equivalent in Jaquar/ Hindware]

S&F of aluminium composite panel sheet of 5 mm thick with skin thickness of 0.25 mm of aluminium on both sides, sandwiched by 4.5 mm thick polyethylene core with PVDF coating of 30 micron, fixed to and including aluminium frame work as required complete including fixing accessories, finishing material etc complete all as specified and as directed.

M&L for cleaning of PVC service tank of capacity 500 Ltrs located at various places at any height by removing the inlet and outlet coupling connections; cleaning and removing all dirty/muddy water from the service tank, removing mud deposited on the tank floor, including scraping all the scale formation using hard scrubbers, brooms etc., cleaning inside surfaces using bleaching powder; writing the details of tanks like date of cleaning, capacity of tanks and due date for next cleaning etc. on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over yellow background of size 60x40cm including cleaning of bottom surfaces of platform, replacement of unserviceable/ defective inlet and outlet coupling and fittings, etc. complete all as specified and as directed

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling, inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed.

S & F of solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site as per specification etc complete all as specified and as directed.

M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 57,450.00

ZAIGHAM ENTERPRISES (BID ID -3081514)

S.K.Enterprises (BID ID -3069214)

Alishba Enterprises (BID ID -3082318)

Ikrar khan & co. (BID ID -3070081)

REHAN CONSTRUCTIONS (BID ID -3070307)

M/s Agarwal Builders (BID ID -3078189)