CANOPY, RVI, PYLON HIGHMAST M&R AT KOTA RRO

ACM CLADDED FRAME WO — THE ACM TO BE CLADDED ON SUPPORTING MS FRAMEWORK. THECLADDING OF ACM MATERIAL SHALL BE MADE AS PER THE HPCLDRAWINGS. PEEL - OFF PROTECTIVE FILM OF ACM TO BE REMOVEDAT SITE AFTER FINAL INSPECTION. ALL WORK TO BE DONE INLINE, LEVEL AND PLUMB. MODE OF MEASUREMENT: THE MEASUREMENTSHALL BE IN AREA ( L X B , SQM PROJECTED ) OF ACM SHEETINSTALLED AT SITE . DEDUCTION FOR THE AREA SHALL BE MADE ATRED SPINE & SPREADER BOX AREA , WHERE EVER APPLICABLE. NOWASTAGE SHALL BE PAID EXTRA.

ACM CLADDED FRAME WO — THE ACM TO BE CLADDED ON SUPPORTING MS FRAMEWORK. THECLADDING OF ACM MATERIAL SHALL BE MADE AS PER THE HPCLDRAWINGS. PEEL - OFF PROTECTIVE FILM OF ACM TO BE REMOVEDAT SITE AFTER FINAL INSPECTION. ALL WORK TO BE DONE INLINE, LEVEL AND PLUMB. MODE OF MEASUREMENT: THE MEASUREMENTSHALL BE IN AREA ( L X B , SQM PROJECTED ) OF ACM SHEETINSTALLED AT SITE . DEDUCTION FOR THE AREA SHALL BE MADE ATRED SPINE & SPREADER BOX AREA , WHERE EVER APPLICABLE. NOWASTAGE SHALL BE PAID EXTRA.

S&I OF 1.16M HP LOG — """SUPPLY AND FABRICATION OF HP LOGO (SIZE:1.16 M) : THE SIZEOF THE LOGO SHALL BEAS PER THE REQUIREMENT OF CANOPYSIGNAGE. THE FABRICATION OF THE SUPPORTINGFRAME, CLADDINGOF SILVER FACIA IN ACM MATERIAL AND FORMING OF PET GMATERIALSHALL BE MADE AS PER THE DRAWING GIVEN IN THETENDER. THE DRAWING ENCLOSED INTHE TENDER ARE INDICATIVE.THE DETAILED FABRICATION AND SHOP FLOOR DRAWINGSSHALL BEDEVELOPED BY THE VENDOR AND SUBMITTED TO HPCL FOR APPROVAL.APPROVALFOR FIXING OF CANOPY STRUCTURE SHOULD BE OBTAINEDPRIOR TO EXECUTION OF THE JOB.PEEL - OFF PROTECTIVE FILMOF ACM TO BE REMOVED AT SITE AFTER FINAL INSPECTION.RATETO INCLUDE SUPPLY, INSTALLATION, TESTING, COMMISSIONING OFLED LIGHTINGALONG WITH SUITABLE POWER DRIVERS INCL.CABLING(DETAILED DATA SHEET &TYPICAL ARRANGEMENT IS ENCLOSED.HOWEVER, THE VENDOR SHALL SUBMIT THE DESIGNDOCUMENT OF LEDMODULE ARRANGEMENT BASED ON THE DATA SHEET FOR EACHELEMENT& APPROVAL OF THE SAME BY HPCL SITE IN CHARGE)MS SUPPORT FRAME, PET G,VINYL. ALL WORK TO BE DONE IN THELINE, LEVEL & PLUMB. MODE OF MEASUREMENT :THEMEASUREMENT FOR HP LOGO WILL BE IN NUMBER AS PER THEDRAWING."""

S&I OF 1 M HP LOGO — """SUPPLY AND FABRICATION OF HP LOGO (SIZE 1.0 M) THE SIZE OFTHE LOGO SHALL BE ASPER THE REQUIREMENT OF CANOPY SIGNAGE.THE FABRICATION OF THE SUPPORTING FRAME,CLADDING OF SILVERFACIA IN ACM MATERIAL AND FORMING OF PET G MATERIAL SHALLBEMADE AS PER THE DRAWING GIVEN IN THE TENDER. THE DRAWINGENCLOSED IN THE TENDERARE INDICATIVE. THE DETAILEDFABRICATION AND SHOP FLOOR DRAWINGS SHALL BEDEVELOPED BYTHE VENDOR AND SUBMITTED TO HPCL FOR APPROVAL. APPROVAL FORFIXINGOF CANOPY STRUCTURE SHOULD BE OBTAINED PRIOR TOEXECUTION OF THE JOB. PEEL - OFFPROTECTIVE FILM OF ACM TOBE REMOVED AT SITE AFTER FINAL INSPECTION. RATE TOINCLUDESUPPLY, INSTALLATION, TESTING, COMMISSIONING OF LEDLIGHTING ALONG WITHSUITABLE POWER DRIVERS INCL. CABLING(DETAILED DATA SHEET & TYPICALARRANGEMENT IS ENCLOSED.HOWEVER, THE VENDOR SHALL SUBMIT THE DESIGN DOCUMENT OFLEDMODULE ARRANGEMENT BASED ON THE DATA SHEET FOR EACH ELEMENT& APPROVALOF THE SAME BY HPCL SITE IN CHARGE) MSSUPPORT FRAME, PET G, VINYL. ALL WORK TOBE DONE IN THELINE, LEVEL & PLUMB. MODE OF MEASUREMENT : THEMEASUREMENTFOR HP LOGO WILL BE IN NUMBER AS PER THEDRAWING."""

S/F/I/T - SIG PYLON — """SCOPE OF THE JOB INCLUDE REMOVAL OF DAMAGED HP LOGO ANDPROVIDING, FIXINGTHERMOFORMED PETG MATERIAL HP LOGO OFSIGNATURE PYLON AS PER DRAWING. RATE TO BEQUOTED FOR THEPET G LOGO ON SINGLE SIDE."""

F/S/T/I OF RED SPINE — SUPPLY AND FABRICATION OF VERTICAL RED SPLINE FOR SMARTPYLON: THE FABRICATION OF THE SUPPORTING FRAME, AND FORMINGOF PET G MATERIAL SHALL BE MADE AS PER THE DRAWING GIVEN INTHE TENDER. THE DRAWING ENCLOSED IN THE TENDER AREINDICATIVE. THE DETAILED FABRICATION AND SHOP FLOORDRAWINGS SHALL BE DEVELOPED BY THE VENDOR AND SUBMITTED TOHPCL FOR APPROVAL. APPROVAL FOR FIXING OF STRUCTURE SHOULDBE OBTAINED PRIOR TO EXECUTION OF THE JOB. RATE TO INCLUDESUPPLY, INSTALLATION, TESTING, COMMISSIONING OF LEDLIGHTING ALONG WITH SUITABLE POWER DRIVERS INCL. CABLING(DETAILED DATA SHEET & TYPICAL ARRANGEMENT IS ENCLOSED.HOWEVER, THE VENDOR SHALL SUBMIT THE DESIGN DOCUMENT OF LEDMODULE ARRANGEMENT BASED ON THE DATA SHEET FOR EACHELEMENT& APPROVAL OF THE SAME BY HPCL SITE IN CHARGE) MSSUPPORT FRAME, GI BACK SHEET, PET G, VINYL. ALL WORK TO BEDONE IN THE LINE, LEVEL & PLUMB. MODE OF MEASUREMENT : THEMEASUREMENT FOR RED SPLINE WILL BE IN NUMBER AS PER THEDRAWING.

S/F/T/I RED SPINE CA — SCOPE INCLUDES THERMOFORMING OF PET G MATERIAL FOR MAKINGRED SPINE AS PER THE DRAWING. RATE TO INCLUDE FOR PET G,VINYL. ALL WORK TO BE DONE IN THE LINE, LEVEL AND PLUMB.FITMENT CHARGES TO BE PAID EXTRA

REPL VINYL COLUMN SP — JOB INCLUDES REMOVAL OF EXISTING SPINE, PEELING OFF OFDAMAGED VINYL AND THOROUGHLY CLEANING SURFACE, STRETCHING,PASTING ONTO THE SPINE WITHOUT FORMING BUBBLES AND WRINKLESAND REINSTALLING BACK THE SPINE

REPL VINYL SIGNATURE — VINYL REPLACEMENT OF SIGN PYLON PER PIECE - EITHER OF TOP/MIDDLE/ BOTTOM

REPL VINYL SMART PYL — JOB INCLUDES REMOVAL OF EXISTING SPINE, PEELING OFF OFDAMAGED VINYL AND HOROUGHLY CLEANING SURFACE, STRETCHING,PASTING ONTO THE SPINE WITHOUT FORMING BUBBLES AND WRINKLESAND REINSTALLING BACK THE SPINE OF SMART PYLON