T.No.-EDC(USN)02/2025-26

Amount

Annexure -A ( Works )

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 33 KV line

Erection of SP-72 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Erection of SP-72 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Muffing of poles size 0.45x0.60 cm radius with 1:3:6 (1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(SP-72 Double Pole)

Painting of SP-72 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Guarding of 33 KV Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual.

Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 0-20 Km)

Dismantling of 33 kv line (panther/dog)

Laying G.S. Earth wire 7/16 SWG for providing Earth Wire on 33 KV Line.

Erection/Installation, Testing and Commissioning of Proposed HTLS Composite Carbon Core Conductor with Hardware fittings and Accessories in the above line as per Technical Specification & Direction of the Engineer in Charge complete in all respect.

Back Carriage of Scrap Material

Annexure - B ( Supply )

Supply of Holding Clamp for Gaurding.

Supply of X ARM F Type Hold Clamp MS SP72- 75x8mm

Supply of PP & Clamp with N&B, ST Pole SP-72

Supply of Stay Clamp For SP-72 with N&B

Supply of Eye Bolt.

Supply of Earth Clamp STP SP-33/55/72 Pole

Supply of Suspension Clamp HTLS

Supply of Dead End Clamp HTLS

Supply of Vibration Damper HTLS

Supply of Repair Sleeve HTLS

Supply of Mid Span Joint HTLS

Supply of alignment ties for ACSS HTLS Conductor

Supply of HTLS (ACSS) Conductor 700 Amp Capacity

PERFECT ELECTRICALS AND ENGINEERS (BID ID -380072)

Saun Engineering and Construction Co P Ltd (BID ID -380099)