NIT NO. 29 ITEM NO. 10

Dismantling of delivery pipeline , sluice value, non return value, joint bend, with the help of heavy man power ,chain pulley ,block, welding set, gas cutter as per site requirement

S/O M.S Black Pipe, Conforming to IS :3589 Gr 330 of 4.85 mm thick 250 mm dia Make:- Jindal/TATA

S/O M.S Black Pipe, Conforming to IS :3589 Gr 330 of 4.85 mm thick 150 mm dia Make:- Jindal/TATA

Supply of M.S. Flange 250 mm dia 15 mm thickness

Supply of M.S. Flange 200 mm dia 15 mm thickness

Supply of 200 mm dia thickness 8 mm 90 degree double flange bend

Supply of 150 mm dia X 200 mm dia thickness 8 mm D/F M.S. Concentric Taper (both sides Flanges) Length:- (as per site Requirement)

P/F of M.S. coupling Guard for 25 H.P. Pumpset

P/F of M.S. coupling Guard for 40 H.P. Pumpset

Breaking the R.C.C foundation by hammer chiesel Electric compressor machine .

Making of R.C.C foundation by 1:2:4 cement concrete , M.S.jal . providing and fixing of Foundation bolts as per site .

Making and supply of M.S. channel base frame suitable for 25 H.P. motor and pump size .

Making and supply of M.S. channel base frame suitable for 40 H.P. motor and pump size .

Supply of C.I D/F non rising spindle sluice value PN :1.0, IS:14846,CI body / wedge / bronze- ring / ss 410 shaft- construction & SS IS:6603 Gr 12 Cr 12 of size 200 mm dia Make:- kirloskar / Ivc.

Supply of C.I D/F swing type non return value as per IS:5312(Part 1&2) PN1.0 CI body, door/Bronze to rubber rings/SS 410 Hinge pin construction of size 150mm dia Make:- kirloskor / Ivc

Supply of M.S. Nut bolts and washer of different sizes as per site requirements

Supply of Neoprene Rubber packing sheet

Supply of PVC insulated and PVC sheathed industrial cable with flexible annealed copper conductor armoured for voltage upto including 1100 Volt grade of size 3X 25 Sq mm Grandley / Havells/DJB Approved

MCCB with thermomagnetic release and terminal providing and fixing following rating and breaking capacityand spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 A, 36 KA ,FP MCCB

Painting of all the pipe line, pump and motor at site

Fitting of delivery pipe line and sluice valve & NRV with proper-alignment ,connection the motor from panel to starter replacement of pipe line ,flange , nut bolts , washer . the job include all tools and tackles, loading and unloading , safety equipments and other precautions etc. i/c Testing and commissioning of load and unload to complete satisfaction of Engineer In- Charge.

GOGIA BROTHERS