GENERAL-General Education Department - Annual plan 2023-2024 Vertical extension for constructing class rooms in Second Floor over existing two storied building of Government Model boys V H S S at Kunnamkulam Thrissur-work-General Civil Work

Amount

APPENDIX 1

15.17.1:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:R.S. Joists

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.33.2:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

OD59910/2023-2024:Supplying and fixing press steel door of standard pattern with frame as per profile of IS 4351 of section 105 x 60 mm using 18 G (1.2 mm thick CRCA) sheet and shutters made of section 75 x 30 cm for outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26 CR as per specified with zinc cromate primer coat measured in sequence metre totally including all charges for fixing handle but hinges etc .complete.

OD59911/2023-2024:Supplying and fixing pressed steel windows of standard pattern with frame as per profile of IS 4351 of section 82x62mm using 18G(1.2mm thick CRCA ) sheet and shutters made of section 50x20x1.20mm for outer styles and horizontal members and fitted with MS grill for each leaf and with necessary hold fast for fixing to wall and Zincromate primer coat measured in sequence metre totally including all charges for fixing etc.complete.

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

13.85.3:Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.83.1:Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.One coat

14.66.2:Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm)

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

5.30:Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD59914/2023-2024:Supplying and fixing 110mm PVC(10kg/cm2)pasted pipe to collect rainwater

OD262983/2023-2024:Supplying and fixing Green board 2.00 x 1.20 m or nearest available size non magnetic green board including all cost , conveyance etc.

OD59915/2023-2024:Painting letters of 23cm, 25cm,30cm hight (Block, Rommon, Italic or Indian ) with synthetic enamal paint including all cost of materials labourcharges scaffolding,conveyance etc. complete.

OD59916/2023-2024: supplying and fixing granite stone 67 cm*90 cm on which the matter engraved, the cost including all labour,materials,conveyance etc complete as per the direction of the engineer at site.

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

VARUN MENON (BID ID -1985118)

LIPIN M V (BID ID -1981840)

ECCR CONSTRUCTIONS AND DEVELOPERS PVT LTD (BID ID -1983094)

EMMANUAL JOSE MANJALY (BID ID -1984248)

AHAMMED KABEER (BID ID -1985794)

Bidder Name

M.M.SUBAIR

LIPIN M V

ECCR CONSTRUCTIONS AND DEVELOPERS PVT LTD

AHAMMED KABEER

VARUN MENON

EMMANUAL JOSE MANJALY