Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Karnataka Power Transmission Corporation Limited

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED IN KPPP PORTAL AND BANK GUARANTEE TOWARDS EMD OVER AND ABOVE RS.10.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., Transmission (Operations) Zone, KPTCL, Hassan SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE TOWARDS BALANCE EMD/BID SECURITY issued either by a Nationalized/Scheduled Bank or Insurance Surety Bond Issued by Insurance Company authorized by IRDAI towards Balance EMD/Bid security. (For the balance EMD above Rs. 10Lakhs ) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/Insurance Surety Bond towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the KPP portal to enable the owner for verification of EMD BG / ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19). 6) POWER OF ATTORNEY (SCHEDULE-20). 7) ANY OTHER AGREEMENTS / UNDERTAKINGS /SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

a) * We have uploaded bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have uploaded bid in Consortium with the following Bidders. (Key in Consortium) VOID

Name of the Consortium Partner VOID

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject bid documents including Clause No.40 of "Conditions of Contract (CC)" and Clause No.11 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Taxes and Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any, applicable on the transaction are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Taxes & Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Taxes, Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Taxes, Duties and Levies additionally payable shall be to our account. We further confirm that no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us.We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers (ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in the Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in KPPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 Instruction to Tenderers (ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.10.00Lakhs and remaining amount of Rs.................................................. ( above Rs.10 Lakhs) in the form of Bank Guarantee in original and two copies of the original valid for a period of 225 days from the date of opening of bids, and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in NIT/CLAUSE NO. 13 of ITT.)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Conditions of Contract (CC) & Clause No.8 of Special Conditions of Contract-SCC.

b. EMD/Bid Security Clause No.6, Section :1, Invitation for Tenders (IFT) and Clause No.13, Section :2, Instruction to Tenderers (ITT)

c. Contract Performance Guarantee Clause No.29 of Section 2, Instruction to Tenderers (ITT)

d. Penalty for delay Clause No.41 of Section-5 : Conditions of Contract (CC)

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC)

f. Defects Liability Period/Guarantee Clause No.10 of Special Conditions of Contract (SCC) and Section 6 : Contract data

g. Work Schedule Clause No.17 of Conditions of Contract-CC

h. Taxes and Duties Clause No.11.11 of Section 2, Instruction to Tenderer (ITT)

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC and all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by IRDAI (OR) in the form of Bank Guarantee (BG) from the Nationalized/Public Sector Banks in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written Letter of Intent to Award the Contract thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We declare that in terms of Clause no. 11 of ITT & all other relevant clause of Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the percentage Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form uploaded

2 No deviation certificate uploaded

3. a) EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.10Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b) EMD amount above Rs.10Lakh by Bank Guarantee

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3A(i) - Supply portion- Hiremagalur Augmentation Work

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Sl No. Name of the Equipment/Materials Unit Quantity Supply of Material

Unit Rate (in Rs.) Amount (in Rs.)

S1 Power Transformers: a) 20 MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC, ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake ACSR on primary side of transformer and copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators as per technical specifications.(39.1 MT) No. 2 KPTCL supply

S2 Nitrogen Injection fire extinguishing system-supplying, erection & incluidng civil Engineering works, soak pit etc., as per the recommendation of the supplier of the fire lighting system for Power Transformer below100 MVA No 2 KPTCL supply

S3 CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor

a 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection (similar rating and ratio as that of incomer of 11 kV Switchgear) with terminal connector suitable for 2 no's of 50 X8 mm Copper flats No. 2 63000.00 126000.00

b 11 kV CT : 1200-800/1-1-1 A (for Incomers of 25 kA SWG) OUTDOOR No. 3 63000.00 189000.00

Note:- 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of performance. 2)The make and characteristics of 11kV NCT should be the same as that of the incomer CT of 11kV switchgear. To ensure this, the 11kV NCT should be procured from the supplier of 11kV switchgear only.

S4 11kV Switchgear

a 11 kV, 500MVA, 25 kA, Metal clad VCB switchgear 1600 A for incomer & 1250 A for feeders) outdoor type, each comprising of 1 I/C+2F+1BC+1CB+1AP3 (remote announciation cum control panel )with CTs & PTs etc., complete as per technical specification. Note: 1.Simplex type annunciator panel shall be provided for switchgear (consisting of incomer, feeders and bus coupler 2. For Capacitor Bank: The Capaciotr bank panel shall be same as that of the 11kV bank. i.e., incomer panel in all respect. In addition to relays provided in the I/C, the following adddition relays to be provided. i. Circulating current relay with timer ii. Under voltage relay iii. Timer relay Set 1 KPTCL supply

b 11 kV, 350MVA, PCVCB switchgear 800 A for Capacitor Bank-3 of existing Bank-1 outdoor type, with CTs & PTs etc., complete as per technical specification. SCADA Compatiable No 1 KPTCL supply

c 11KV, 350MVA rupuring capacity, Porcelain Clad VCB Switchgear, outdoor type KIOSK, 800 A comprising of 2F+1AP3 ( remote annunciation cum control panel for 1 I/C +4F) with CTs & PTs and terminal connectors etc., complete as per technical specification. No 1 KPTCL supply

d Annunciator Panel for One Capacitor Bank Panel No 1 KPTCL supply

S5 CAPACITOR BANK: Design, Engineering , supply, erection of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable neutral CT and 0.2% series reactors on neutral side with elevating/mounting structure and with 10% spare capacitors complete (This does not include breaker, panel,civil works excavation and concrete works)(For Tr-2 2 number of Capacitor bank and Tr-3, 1 number of Capacitor Bank) No. 2 538450.00 1076900.00

S6 LTAC/ACDB/DCDB:

a LTAC Panel (Indoor) : 415 V, as per Technical specification comprising of Volt Meter, Ammeter & 1 No. ETV meter. 1 No. I/C MCCB 200 A + 2 Nos. 3 Phase, 63 A OG SFU + 2 Nos. 3 phase, 32 A OG SFU + 6 Nos. 3 phase, 16 A SFU etc., complete Nos. 1 85910.00 85,910.00

b AC Distribution box (outdoor) : AC Distribution box Single front type as mentioned in technical specification, 6 terminals, one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type Nos. 1 72600.00 72,600.00

c DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete as per technical specification. Nos. 1 52030.00 52,030.00

S7 ISOLATORS : Isolators including marshalling box and suitable terminal connectors ,as required as per technical specification with solid core cylindrical post insulators 0.00

a 11kV Isolators double break 400 A, 25kA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR. For 2.9 MVAR capacitor bank and 2 Additional PCVCB Switchgear Set 6 21260.00 127560.00

b 11 kV isolator, double break 1200 A, with rigid bi-metallic terminal connector suitable for Moose ACSR Set 3 51675.00 155025.00

c 11kV Isolators Single break 400 A, 25kA capacity with Roaster Switch, with rigid bi-metallic terminal connector suitable for coyote ACSR. For 2 Additional PCVCB Switchgear Set 2 14956.00 29912.00

S8 SURGE ARRESTOR : 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR No. 12 920.00 11040.00

S9 Station Structures :

11 kV ODS and take of structure

a Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set Set 4 26922.00 107688.00

b RCC Pole 9.5 metre Long 300 kg working load for extension of Bank-1 Bus No. 6 8,316.00 49,896.00

c Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side Weight of 1B2 4.00 metre Long= 0.036+.0018 MT per unit No/t 24/0.907 4,660.69 111,856.46

S10 MOUNTING STRUCTURES :

a 11KV Cable Terminating Structure for LV Side of Transformer(0.069+0.003 MT Per Structure)(For 1 number for Power Transformer and 1 number for Buscoupler GOS between Bank 2 and Bank 3 ) No/t 02/0.144 8,865.81 17,731.62

b 11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank(0.150+0.0075 MT per structure)(For Capcitor bank of TR-2) No/t 01/0.1575 19,419.53 19,419.53

c 11 kV NCT structures for 11 kV Bank side (0.146+0.011 MT Per Structure) No/t 02/0.314 19,453.97 38,907.94

d High pedestal insulators for transformer on 11 kV Bank side (0.220+0.011 MT Per Structure) No/t 06/1.386 28,481.97 170,891.82

S11 BUS BAR FORMATION : 0.00

a Moose ACSR(For 11 kV Side Bus replacement) Mtr 450 599.00 269550.00

b Drake ACSR(For Transformers 11 kV Side Bus extension) Mtr 75 461.00 34575.00

c Coyote ACSR(For 11 kV DP Jump and Capacitor banks) Mtr 120 164.00 19680.00

S12 INSULATORS :

DISC INSULATORS WITH HARDWARES :

a Post Insulator Solid Core Insulator (33 KV class) - 11 KV side Nos. 6 3672.00 22,032.00

b Single Tension string using 2 units of each 11 kV, 120 KN disc insulator along with Bolted Type Tension Clamp and hardware suitable for Moose ACSR.( 11 kV Side) String 102 4296.00 438,192.00

c Single Tension string using 1 units of each 11 kV, 90 KN disc insulator along with Bolted Type Tension Clamp and hardware suitable for Coyote ACSR.( 11 kV Side) String 18 2024.00 36,432.00

S13 HARDWARES :

a Copper Flat for Transformer Neutral 2 nos of 50 X 8 mm size 5 Mtr length Nos. 1 10000.00 10,000.00

b Post insulator clamps suitable for single Moose conductor Nos. 6 1102.00 6,612.00

c C type wedge connector suitable for Moose -Moose (11kV Side ) Nos. 99 3983.00 394,317.00

d C typeMoose 2 hole paddle ACSR Conductor & 2 hole paddle : 1400 A (11kV Side ) Nos. 60 10353.00 621,180.00

e C type wedge connector suitable for Moose -Drake (11kV Side ) Nos. 51 3983.00 203,133.00

f C type wedge connector suitable for Drake -Coyote (11kV Side ) Nos. 51 2577.00 131,427.00

g C type wedge connector suitable for Coyote -Coyote (11kV Side ) Nos. 39 773.00 30,147.00

h C type Coyote 2 hole paddle ACSR Conductor : 610 A (11kV Side ) Nos. 24 2250.00 54,000.00

i Coyote PG clamps Nos. 12 341.00 4,092.00

S14 1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications 0.00

S15 LT Power armoured UG cable as per specification

a 1.1 kV Class PVC insulated 95 Sq.mm Armoured Aluminium Cable 4 core with glands/lugs/ferrules Mtr 30 762.00 22,860.00

b 1.1 kV Class PVC insulated 25 Sq.mm Armoured Copper Cable 4 core with glands/lugs/ferrules Mtr 30 866.00 25,980.00

c 1.1 kV Class PVC insulated 10 Sq.mm Armoured Copper Cable 4 core with glands/lugs/ferrules Mtr 80 375.00 30,000.00

a Auxillary Relay - 3 element suitable for C&R panels at 110 kV and 66 kV Stations for NIFES Nos. 1 8063.00 8063.00

b Numerical Differential Relay for 110 kV and 66 kV class Power Transformers with IEC 61850 communication protocol Nos. 1 249250.00 249250.00

c Numerical Restricted Earth Fault Relay for 66 kV class Power Transformers with IEC 61850 communication protocol Nos. 1 86394.00 86394.00

d Numerical Back up protection relay suitable for 400 kV and 220 kV, 110 kV and 66 kV System compatible to IEC 61850 protocol Nos. 1 98736.00 98736.00

e Annunciation Window (24 Windows) for Power Transformer-2 Nos. 1 24000.00 24000.00

S17 11kV U G cable with the required cable terminations at both ends

a 11 kV class 1 X 1000 Sq mm U G Cable XLPE (from 110/11kV transformers to 11kV switchgear) Mtr 240 1,523.00 365,520.00

b 11 kV class 3 X 240 Sq mm U G Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtr 100 1,656.05 165,604.80

c Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type ) No. 8 3,808.00 30,464.00

d Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type) No. 8 4,060.00 32,480.00

e Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type ) No. 3 4,691.00 14,073.00

f Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type) No. 3 5,318.00 15,954.00

S18 Materials for integration to existing SCADA panel 0.00

a Multi Functional Transducer (MFT) 3 phase, 4 wire, self powered, 0.2 s accuracy class No. 13 4,875.00 63375.00

b 8 chnl 110V Opto Coupler No. 4 1,312.00 5248.00

Cables -Supplying

c RYB & Black colour, 2.5Sqmm for PT wiring. Mtr 224 24.99 5597.76

d Comunication Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core for MFT integration and DI wiring Mtr 310 143.00 44330.00

e Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtr 70 155.00 10850.00

f Link TB,s for PT WIRING & DO wiring Nos. 64 40.00 2560.00

g CT TBs Nos. 48 40.00 1920.00

h Digital input card along with patch cable & necessary TB's (Suitable for ABB RTU560 Panel 23BE23) (1 No of DI card + 1 set Amp cable along with interfacing TB's) Set 3 50,000.00 150000.00

i Digital output card along with patch cable & necessary TB's (Suitable for ABB RTU560 Panel 23BA20) (1 No of DO card + 1 set Amp cable + 16 No's CMR relays along with interfacing TB's and wires from relays to TB's) Set 1 65,000.00 65000.00

j 560CMU 05 suitable for ABB RTU 560 panel (4 No's of LAN port + 2 No's of LAN port for remote data communication) Nos. 1 30,000.00 30000.00

k Din rails, C & G type TB channels, Suitable Ring, Tubular and Fork lugs, glands, tapes etc. L/S 3 5,000.00 15000.00

S19 MISCELLANOUS ITEMS

a Rubber mats 1000 mm x 1000 mm x 10 mm size suitable for 1.1 kV class. No. 9 1900.00 17100.00

b Equipment name plates and earthing name plates including fixing at outdoor yard No. 44 416.00 18,304.00

c Earth Bonds 450 mm long No. 30 563.00 16,890.00

SUPPLY PORTION TOTAL 7,643,775.93

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3A(ii) - ERECTION, T&C, DECOMMISSIONING PORTION- Hiremagalur Augmentation Work

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

ERECTION, T&C, DECOMMISSIONING PORTION

Sl No. Name of the Equipment/Materials Unit Quantity Erection charges Testing and Commissioning charges

Unit Rate (in Rs.) Amount (in Rs.) Unit Rate (in Rs.) Amount (in Rs.)

E1 Erection of Power Transformers: a) 20 MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC, ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake ACSR on primary side of transformer and copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators as per technical specifications. a) Inspection of wires and ferrules. Inspection of wiring of protective devices, cooling fans, oil flow pumps, OLTC, RTCC, bushing etc., b) Testing : 1. Ratio Test 2. SC Test 3. Excitation Current Test/ Highpot Test 4. Magnetic Balance Test 5. Vector Group Test 6. Induced High Voltage Test 7. OLTC Operation - Local and Remote 8. Protective Devices Operation Checks 9. Stability Checks : For Differential & REFR Protection 10. Winding Resistance Test 11. Insulation Resistance Test 12. Tan-Delta and Capacitance Test 13. Transformer mounted protective Devices 14. Sweep Frequency Response Analysis No. 2 200,739.40 401,478.80 71,159.00 142,318.00

E2 Erection of CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor 0.00 0.00

a 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection (similar rating and ratio as that of incomer of 11 kV Switchgear) with terminal connector suitable for 2 no's of 50 X8 mm Copper flats No. 2 733.00 1466.00 4545.00 9090.00

b 11 kV CT : 1200-800/1-1-1 A (for Incomers of 25 kA SWG) OUTDOOR No. 3 733.00 2199.00 4700.33 14101.00

Note:- 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of performance. 2)The make and characteristics of 11kV NCT should be the same as that of the incomer CT of 11kV switchgear. To ensure this, the 11kV NCT should be procured from the supplier of 11kV switchgear only.

E3 Erection of 11kV Switchgear

a 11 kV, 500MVA, 25 kA, Metal clad VCB switchgear 1600 A for incomer & 1250 A for feeders) outdoor type, each comprising of 1 I/C+2F+1BC+1CB+1AP3 (remote announciation cum control panel )with CTs & PTs etc., complete as per technical specification. Note: 1.Simplex type annunciator panel shall be provided for switchgear (consisting of incomer, feeders and bus coupler 2. For Capacitor Bank: The Capaciotr bank panel shall be same as that of the 11kV bank. i.e., incomer panel in all respect. In addition to relays provided in the I/C, the following adddition relays to be provided. i. Circulating current relay with timer ii. Under voltage relay iii. Timer relay Set 1 2,081.00 12,486.00 8,039.33 48,236.00

b 11 kV, 350MVA, PCVCB switchgear 800 A for Capacitor Bank-3 of existing Bank-1 outdoor type, with CTs & PTs etc., complete as per technical specification. SCADA Compatiable No 1 2,081.00 2,081.00 8,039.33 8,039.33

c 11KV, 350MVA rupuring capacity, Porcelain Clad VCB Switchgear, outdoor type KIOSK, 800 A comprising of 2F+1AP3 ( remote annunciation cum control panel for 1 I/C +4F) with CTs & PTs and terminal connectors etc., complete as per technical specification. No 1 2,081.00 6,243.00 8,039.33 24,118.00

d Annunciator Panel for One Capacitor Bank Panel No 1 2,081.00 2,081.00 8,039.33 8,039.33

E4 Erection of LTAC/ACDB/DCDB

a LTAC Panel (Indoor) : 415 V, as per Technical specification comprising of Volt Meter, Ammeter & 1 No. ETV meter. 1 No. I/C MCCB 200 A + 2 Nos. 3 Phase, 63 A OG SFU + 2 Nos. 3 phase, 32 A OG SFU + 6 Nos. 3 phase, 16 A SFU etc., complete. Nos. 1 4175.00 4,175.00

b AC Distribution box (outdoor) : AC Distribution box Single front type as mentioned in technical specification, 6 terminals, one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type Nos. 1 4175.00 4,175.00

c DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete as per technical specification. Nos. 1 4175.00 4,175.00

E5 ISOLATORS : Isolators including marshalling box and suitable terminal connectors ,as required as per technical specification with solid core cylindrical post insulators 0.00 0.00

a 11kV Isolators double break 400 A, 25kA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR. For 2.9 MVAR capacitor bank and 2 Additional PCVCB Switchgear Set 6 1214.00 7284.00 0.00

b 11 kV isolator, double break 1200 A, with rigid bi-metallic terminal connector suitable for Moose ACSR (ESCOM rate) Set 3 2413.00 7239.00 0.00

c 11kV Isolators Single break 400 A, 25kA capacity with Roaster Switch, with rigid bi-metallic terminal connector suitable for coyote ACSR. For 2 Additional PCVCB Switchgear Set 2 1214.00 2428.00 0.00

E6 Erection of SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR No. 12 39.67 476.00

E7 Erection of Station Structures :

11 kV ODS and take of structure

a Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set Set 4 3199.00 12796.00

b RCC Pole 9.5 metre Long 300 kg working load for extension of Bank-1 Bus No. 6 1,742.00 10,452.00

c Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side Weight of 1B2 4.00 metre Long= 0.036+.0018 MT per unit No/t 24/0.9072 5,723.00 5,191.91

E8 Erection of MOUNTING STRUCTURES :

a 11KV Cable Terminating Structure for LV Side of Transformer(0.069+0.003 MT Per Structure)(For 1 number for Power Transformer and 1 number for Buscoupler GOS between Bank 2 and Bank 3 ) No/t 02/0.144 5,723.00 824.11

b 11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank(0.150+0.0075 MT per structure)(For Capcitor bank of TR-2) No/t 01/0.1575 5723.00 901.37

c 11 kV NCT structures for 11 kV Bank side (0.146+0.011 MT Per Structure) No/t 02/0.314 5,723.00 1,797.02

d High pedestal insulators for transformer on 11 kV Bank side (0.220+0.011 MT Per Structure) No/t 06/1.386 5,723.00 7,932.08

E9 Busbar Formation: Main bus/cross bus (all the three phases in a segment) using Moose/Drake/Coyote-single conductors with fixing of insulator spacers, levelling of string conductors to the required height above the equipment, including providing jumps to interconnect different segments of the main bus Bay 5 12087.00 60435.00

E10 Erection of Post Insulator Solid Core Insulator (33 KV class) - 11 KV side Nos. 6 111.00 666.00

E11 Laying of 1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications 0.00

E12 Laying of LT Power armoured UG cable as per specification

a 1.1 kV Class PVC insulated 95 Sq.mm Armoured Aluminium Cable 4 core with glands/lugs/ferrules Mtr 30 15.00 450.00

b 1.1 kV Class PVC insulated 25 Sq.mm Armoured Copper Cable 4 core with glands/lugs/ferrules Mtr 30 15.00 450.00

c 1.1 kV Class PVC insulated 10 Sq.mm Armoured Copper Cable 4 core with glands/lugs/ferrules Mtr 80 15.00 1,200.00

E13 Retrofitting, testing and Commissioning Charges for relays Nos. 5 15365.00 76,825.00

E14 Laying of 11kV U G cable with the required cable terminations at both ends

1 11 kV class 1 X 1000 Sq mm U G Cable XLPE (from 110/11kV transformers to 11kV switchgear) Mtr 240 29.00 6,960.00

2 11 kV class 3 X 240 Sq mm U G Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtr 100 29.00 2,900.00

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type ) No. 8 3,752.00 30,016.00

4 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type) No. 8 3,752.00 30,016.00

5 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type ) No. 3 2,658.00 7,974.00

6 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type) No. 3 2,658.00 7,974.00

E15 Erection of materials for integration to existing SCADA panel 0.00

a Multi Functional Transducer (MFT) 3 phase, 4 wire, self powered, 0.2 s accuracy class No. 13 1555.00 20,215.00

b 8 chnl 110V Opto Coupler No. 4 1555.00 6,220.00

Cables - Laying

c RYB & Black colour, 2.5Sqmm for PT wiring. Mtr 224 25.00 5600.00

d Comunication Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core for MFT integration and DI wiring Mtr 310 25.00 7750.00

e Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtr 70 25.00 1750.00

f Configuration of RTU and Engineering along with validation of data at SLDC Nos. 8 2381.00 19,048.00

E16 Earth Mat formation : 0.00

a Supplying and laying of MS Flats of 75 X 12 mm sizes, welding and applying ACB paint to welded portion and covering without sodium bentonite clay as per the drawing/standard specification and consolidation Rmtr. 3274 635.00 2078990.00

b Providing MS Round rod 40 mm dia1.075 metre long earthmat spikes including heating, bending top 50/75 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat. Nos. 174 1186.00 206364.00

c Grounding of equipments with 75 x 12 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Rmtr. 300 916.00 274800.00

d Grounding of equipments with 50 x 6 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Rmtr. 140 335.00 46900.00

e Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) set 32 16283.00 521056.00

f Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits. No. 32 1499.00 47968.00

g Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite treatment in the annular space, including transportation of rig & other supporting vehicles , etc, complete, as per the directions of engineer in charge, including cost of MS rod & sodium bentonite. (10 Nos.)

i) Drilling 150 mm dia bore Rmtr. 50 848.00 42,400.00

ii) 40mm dia MS rod( 5 mtr long-16 No) Rmtr. 50 940.00 47,000.00

iii) Bentonite clay Kg 300 25.00 7,500.00

iv) Cost of GI flat for joining two rods by welding to obtain continuous length per joint 5 995.00 4,975.00

E17 Decommissioing portion: 0.00

a Dismantling of existing 12.5MVA 66/11kV transformer 1(Atlanta) along with RTCC panel & parts like bushing, releasing of oil from transformer etc(36 MT) MT 36.00 1134.00 40824.00

b Dismantling of existing 8MVA 66/11kV transformer 2 (NGEF) along with RTCC panel & parts like bushing, releasing of oil from transformer etc(25.3 MT) MT 25.30 1134.00 28690.20

c Moving of Transformer 1 from the plinth to the loading point as per direction of site Engineer 36MTx50metresx1=1800 MT- Mtrs 1800.00 80.00 144000.00

d Moving of Transformer 2 from the plinth to the loading point as per direction of site Engineer 25.MTx50metresx1=1265 MT- Mtrs 1265.00 80.00 101200.00

e Dismantling of existing 11kV Class, NCT Nos 2.00 733.00 1466.00

f Dismantling of existing 11kV Class, CT Nos 3.00 733.00 2199.00

g Dismantling of existing 11kV Class, NCT Mounting Structure (2 nos) t 0.31 5723.00 1797.02

h Dismantaling of 11 kV, 400 A DB GOS Nos 1.00 1214.00 1214.00

i Releasing of High pedestal mounting structure (6Nos. / 1.32 MT) of Power Transformer-1 MT 1.32 5723.00 7554.36

j Releasing of post insulator solid core insulator - 11 KV side of Power Transformer 1 Nos 6.00 111.00 666.00

k Releasing and reerection of High pedestal mounting structure (3 / 0.66) of Power Transformer-2 t 0.31 11446.00 3594.04

l Releasing and reerection of post insulator solid core insulator - 11 KV side of Power Transformer 2 Nos 3.00 222.00 666.00

m Releasing and re erection of 100 kVA Auxillary Transformer Nos 1.00 37184.00 37184.00

n Releasing and reerection of DP structure with accessories of 100 KVA auxilary transformer Set 1.00 14834.00 14834.00

o Releasing of Drake Bus 11 kV Side Bays 2.00 12087.00 24174.00

ERECTION, T&C, DECOMMISSIONING PORTION TOTAL 4,530,320.92 253,941.67

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3A(iii) - CIVIL PORTION- Hiremagalur Augmentation Work

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Sl. No. Particulars Unit Quantity Unit Rate in Rs. Amount in Rs.

C1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 709.00 242.00 171578.00

C2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 73.50 6147.00 451804.50

C3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% Cum 77.00 6413.81 493863.37

C4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add 70 % FOR COLUMNS Cum 2.40 10585.90 25406.16

C5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add 50 % Cum 2.50 9340.50 23351.25

C6 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For columns ( 70% considered for Form work) Cum 3.50 11447.80 40067.30

C7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Beams & lintels Ground floor add 60% Cum 7.20 10774.40 77575.68

C8 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Chejjas & Canopy of CRB add 45% cum 2.50 9764.30 24410.75

C9 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Roof slab - Ground floor add 50% cum 12.00 10101.00 121212.00

C10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Cement Concrete Drain Walls add 35% cum 38.75 8406.45 325749.94

C11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Buildings kg 8000.00 80.19 641520.00

C12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 22.00 7948.00 174856.00

C13 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 155.00 347.00 53785.00

C14 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 1218.00 351.00 427518.00

C15 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of incharge. Sqm 90.00 1401.00 126090.00

C16 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. Sqm 39.00 793.00 30927.00

C17 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer in- charge. Sqm 1375.00 26.00 35750.00

C18 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 1375.00 174.00 239250.00

C19 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification for All other type of structures kg 3371.00 69.75 235127.25

C20 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 420 565.00 237300.00

C21 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Per Mtr 40.00 78.00 3120.00

C22 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25mm dia 2mm thick Per Mtr 50.00 79.00 3950.00

C23 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Each Point 8 379.00 3032.00

C24 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Each Point 4 555.00 2220.00

C25 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches box Each Point 6 989.00 5934.00

C26 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way Each 5 261.00 1305.00

C27 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module Each 5 284.00 1420.00

C28 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm. m 100 26.00 2600.00

C29 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way Each 30 128.00 3840.00

C30 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 5 236.00 1180.00

C31 Supplying of recess mounting non integrated type LED downlight......W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI>70% .efficacy >100 lumen per W, 120 degree beam spread, life>25000 burning hours and Compliance to IS10322/IEC60598, LM79 & LM80. The lamp compartment is enclosed with antiglareopal diffuser which enhances the lighting level. LED' s are driven by HF electronic driver integrated in aseparate control gear assembly., with PF>0.95, power loss should < 5% of lamp W age, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' 36 W Each 8 4553.00 36424.00

C32 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 8 1269.00 10152.00

C33 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders Each 16 122.00 1952.00

C34 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 100.00 411.00 41100.00

C35 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the Kxcavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 100.00 220.00 22000.00

C36 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge Kg 9687.50 108.00 1046250.00

C37 Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a slip form paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing. cum 14.50 8083.00 117203.50

C38 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer-in-charge. M 16.00 70.00 1120.00

C39 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight M 16.00 48.00 768.00

C40 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum 28.80 493.00 14198.40

C41 Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface reparation. Sqm 9.60 295.00 2832.00

C42 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. for Cable duct E & F Type m 65 1332.00 86580.00

C43 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. Each 2.00 5454.00 10908.00

C44 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. completecharge. (450X450 mm) & (600 X 600 mm) Each 2 1914.00 3828.00

C45 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m. cum 348.00 484.00 168432.00

C46 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 1479.50 266.00 393547.00

C47 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. cum 387.50 85.00 32937.50

C48 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes Mtr 15 372.00 5580.00

C49 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes Mtr 25 296.00 7400.00

C50 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 955.50 95.00 90772.50

C51 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure Cum 339 1773.00 601047.00

C52 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates with 3% formwork Cum 30.00 6516.81 195504.30

C53 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) cum 232 6364.00 1476448.00

C54 Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 224.4 171.00 38372.40

C55 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 398 1308.00 520584.00

C56 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia 4 mm) Sqm 238 803.00 191114.00

C57 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. m 2970.00 18.00 53460.00

C58 Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. Hard rock (blasting prohibited) Depth upto 1.50 m cum 1179.00 1014.00 1195506.00

C59 Removing the existing jelly and stocking after completion of work respreading of 100 mm thickness of graval size 25 mm after completion of equipment foundation as per specifications etc., complete as per directions of the Engineer in charge of the work. Sqm 200.00 53.00 10600.00

C60 Dismantling of concrete only like Auxilary transformer foundation, pedestal structure foundation, NCT foundation etc., L/s 1.00 10000.00 10000.00

CIVIL PORTION TOTAL 10372363.80

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We have enclosed(uploaded) with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Please fill Only in the Light Blue Couloured Cell.

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

a) * We have uploaded bid as individual Bidder. (Key in Individual Bidder )

b) * We have uploaded bid in Consortium with the following Bidders. (Key in Consortium ) VOID

Name of Consortium Partner VOID

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl.No. Particulars Bidder details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder details For individual Bidder

(Indicate Yes /No)

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Furnished / Not

2 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer ITT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer ITT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed by bidder as per Clause No: 3.2 (b) (i) of ITT

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

Date Designation

Place Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total (Ex-works + GST)

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-Works GST Total (Ex-works + GST)

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

ii) A self-declaration is to be uploaded by the bidder stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder

Mention Year Amount(Rs.)

Names of the constituent Firms

1 Annual turn over for the last Five years Year(1) 2020-2021

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of Bidder Financial Year Details

KPTCL works Non KPTCL works

Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers who may provide references if contacted by the Employer.

Sl.No Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers

1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We propose the following deployment of manpower for the Substation Portion and Line Package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Bidders Name and Address: To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Bidders Name and Address: To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Period in Months for the Work of Construction of 66kV Transmission Lines

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

SL.No Details of Equipments Type Test(To be filled for applicable items only) Test Charges ( in Rs )

1 Power Transformers: VOID

b) 100MVA,220/110kV VOID

b) 10MVA,110/11kV VOID

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

b) Coyote conductor

c) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN THE ITEM_WISE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses : VOID

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Bidders Name and Address To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Dear Sir, We Declare that the ratings and performance figures of the transformer furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

Equipment Guaranteed Losses at rated output(KW)

Max No Load loss at rated voltage and rated frequency Max Load loss at rated current and frequency and at 75 deg C at principal tap Max I2 R loss at rated current and frequency and at 75 deg C at principal tap Max Auxiliary loss at rated voltage and frequency for Power Transformer

i) 10MVA, 110/11kV Power Transformer VOID (Supplied by KPTCL)

Note:(i) Refer Technical Specifications Vol II A 1 of 2, Section 3 (A) (ii)The loss quoted shall be consistent in Schedule 14 and GTPs(DRS)of Power Transformer

Equipment Total Losses in KW / watts

i) 100KVA, 11KV/433V Auxiliary Transformer Note: Refer Technical Specifications Vol IIA 2 of 2, Section 5.5 clause 10.0 As per technical specifications, for 100 kVA, 11KV/433V Auxiliary Transformer: Maximum Losses should not exceed 1500 watts

Note: Refer Technical Specifications Vol IIA 2 of 2, Section 5.5 clause 10.0 As per technical specifications, for 100 kVA, 11KV/433V Auxiliary Transformer: Maximum Losses should not exceed 1500 watts.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDERS NAME AND ADDRESS The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformers: VOID

b) 10MVA,110/11kV

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

b) Coyote conductor

c) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of Payment Clause No. 37 of Section-5 : Conditions of Contract – CC, Cl. No. 8 of Special Conditions of Contract-SCC

b) Bid guarantee Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer-ITT

c) Contract Performance guarantee Clause 29, Section –2, Instruction to Tenderer-ITT.

d) Penalty for delay Clause No. 41 of Section-5 - Conditions of Contract-CC

e) Price Basis/Price Adjustment Clause No. 40 of Section-5-Conditions of Contract-CC

f)Defects Liability Period/ Guarantee Clause No. 10 of Special Conditions of Contract-SCC

g) Work Schedule Clause No. 17 of Conditions of Contract-CC

h) Taxes and duties Clause No. 11.11 of Instruction to Tenderer (ITT)

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost, implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17 FORM FOR BID SECURITY/EMD (ANNEXURE-II)

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS SFMS CHARGES IF ANY ) TO CHIEF ENGINEER ELECTRICIYT ,TRANSMISSION(OPERATIONS) ZONE,KPTCL,HASSAN SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I*/We* hereby submit our Bid and undertake to keep our Bid Valid for a period of 180 days from the date of techno-commercial bid opening. I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Contract" 'cl.no. 26 of Section ITT of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 - CONSORTIUM AGREEMENT ON NON JUDICIAL STAMP PAPER OF Rs. 500/- (ANNEXURE -XIII)

Karnataka Power Transmission Corporation Limited

SCHEDULE-20A POWER OF ATTORNEY (ANNEXURE-XI)

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

POWER OF ATTORNEY

(On Non-Judicial Stamp Paper of Value Rs. 500 )

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Bidders Name and Address To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22 - Check List

Replacement of 1x12.5 MVA and 1x8 MVA, 66/11 kV Power Transformers by 2x20MVA, 66/11 kV Power Transformers at 66/11 kV Hiremagaluru Sub-station in Chikkamagaluru taluk, Chikkamagaluru District on PTK basis (2x20MVA, 66/11kV PTR along with NIFPS & 11kV switchgear shall be supplied by KPTCL)

Work Indent No.: KPTCL/2025-26/EL/WORK_INDENT3452

BIDDERS NAME AND ADDRESS To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Item-Wise Bid Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17 Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 20A Power of attorney

Schedule 21 Guaranteed Declaration

Schedule 22 Check list

DRS 1-42 Relevant Technical details for Materials / Equipments

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company