Constructing OH line from Mangalathumukku to Chanthoor (CW -4587-202526-12) (including 50 M UG for crossing 33 kV line) under Electrical Section Kottarakkara of Electrical Division Kottarakkara

Transporting LT ABC by hired vehicle to a distance up to 5km and carrying up to 2 drum including loading & unloading using crane

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/ structure &back filling.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11KV DP incl. conveyance of materials.

Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads

Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole incl. conveyance of materials

Doing one cable end termination on HT ABC of sizes up to 3x150+1x120sqmm

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and erecting one HT DP using HT PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads

Fitting one No. MVT on existing cross arm excluding termination work ( for one phase) of any rating of 11KV AB Cable

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit

Insertion of one HT PSC pole in existing line including digging & backfilling pit,fitting cross arm,insulators,binding etc

Fitting one set AB switch and giving connection

Fabricating and issuing name board of size 40 x 15 cm in aluminium sheet of 20 gauge painting with blue paint and printing AB switch name

Additional rate for excavation of Pit for A type pole in Laterite

Fitting one set (3 No.s ) 11KV LA and giving connections excluding earthing

Fitting and providing one strut using HT PSC pole incl. digging and back filling pit

Stringing of 11kv Arial Bunched cable of size 3x120+1x95 sqmm with bare/insulated Messenger through existing poles

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion

Fitting one additional HT pin with insulator

Fitting one LT 4 line cross arm on Ht or LT existing pole incl. fitting insulators and binding the same with LT line

Reshackling one span LT Sph 2 wire OH line ,replacing insulators,tightening stay,cutting tree branches incl conveyance

Reshackling one span LT 3ph 4 wire OH line ,replacing insulators,tightening stay,cutting tree branches incl conveyance

Reshackling one span LT OH Addl conductor ,replacing insulators,tightening stay,cutting tree branches incl conveyance

Fitting one LT 2 line cross arm on Ht or LT existing pole incl. fitting insulators and binding the same with LT line

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to new pole

Additional rate for excavation of one pit for HT pole/ HT stay in laterite

Additional rate for providing one disc set on any type of HT pole for making cut point

Fitting and erecting one HT PSC pole in position incl. fitting cross arm, digging & backfilling pit,drawing earth leads

Fitting and erecting one HT A type pole in position incl. fitting cross arm, digging & backfilling pit,drawing earth leads

Fitting and providing one HT Fly stay for 11 kV pole using HT PSC pole incl digging & backfilling pits

Providing WP support with PSC pole incl digging & backfilling pit

Pole numbering using printed Aluminium sheets / painting the surface of pole with anti algal yellow paint and painting letters with black paint as specified incl. cost of paint

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all materials(as per specification)

Dismantling ( without damage ) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same

Renewing damaged PSC/RCC Transformer DP structure with new A type Transformer DP and re-erecting all accessories & Transformer (including renewal of pipe earthing)

Providing transformer fencing using 50 x50x 6 mm Angle iron 40x 6 mm MS flat and 8 mm MS rod as specified incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall

Please Enable Macros to View BoQ information