Providing functional house hold tap (FHTC) connection in village Kural, Kasiyal, Bhanoli etc. through proposed LWSS Kural, Kasiyal, Bhanoli in Tehsil Fatehpur District Kangra HP under Jal Jeevan Mission

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed by the Engineer in charge complete in all respect within all leads and lifts.

Providing and laying cement concrete 1: 6: 12 (1Cement: 6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect within all leads and lifts.

Squarred rubble stone masonry coursed with hard stone of approved quality in foundation & plinth i/c racking out of joints in CM 1:6 complete in all respect within all leads and lifts.

Providing and laying damp proof course 38 mm thick with cement concrete 1:2:4 (1cement:2 sand: 4 graded stone aggregate 12.50 mm nominal size and curing complete in all respect within all leads and lifts.

Applying a coat of hot bitumen (mexphalt 80/100 equivalent) using 1.70 kg. per Sqm. on damp proof course after cleaning the surface with af loating piece of cloth lightly socked in Kerosene oil complete in all respect within all leads and lifts.

Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement : 6 sand) complete in all respect within all leads and lifts.

Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood complete in all respect within all leads and lifts.

Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick complete in all respect within all leads and lifts.

Providing & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws complete in all respect within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced complete in all respect within all leads and lifts.

In Flat surface such as soffits of suspended floors, roofs, landings and like floors upto 200mm kin thickness etc. complete in all respect within all leads and lifts.

In Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor complete in all respect within all leads and lifts.

In foundation,footing, bases of columns etc.and mass concrete.

In columns,pillars,posts and struts,circular or polygonal in plain.

In vertical surfaces such as ;walls(any thickness) partitions and the like in-cluding attached pillasters, buttresses, plinth and string course and the like.

Stair cases with sloping or stepped soffits excluding landings.

Providing form work with ordinary timber planking so as to give a rough finish including centring, shuttering, strutting and propping etc. height of proppping and centering below supporting floor to ceiling exceeding upto any height and removal of the same for in-situ-reinforced concrete and plain concrete work in:- In sloping or battering surface including floded plates where inclination to horizontal plane exceeds 30 degree where shuttering may be provided both on under side if required only the area of under side shall be measured for payment arches etc.

Arches upto 6.00 Metres spans.

Providing and laying cement concrete work 1:2:4 (1cement: 2 sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work complete in all respect within all leads and lifts.:-

Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level complete in all respect within all leads and lifts.

Providing and fixing of terozo tiles 20mm thick with marble chips of specified size laid in skirting, riser of steps, not exceeding 30cm in height on 10mm 1:3 jointed with neat cement sulary mixed with pigment to match the shade of tiles (where regd.) i/c rubbing and

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) complete in all respect within all leads and lifts.

6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand) complete in all respect within all leads and lifts.

Providing plinth protection 50 mm thick in cement concret 1:3:6 (1cement :3 sand: 6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth complete in all respect within all leads and lifts.

Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level complete in all respect within all leads and lifts..

Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt, dust and other foreign matter complete in all respect within all leads and lifts.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink complete in all respect within all leads and lifts.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than complete in all respect within all leads and lifts.

Applying priming coat over new steel and other metal surface after and in-cluding preparing the surface by throughly cleaning oil,dirt and other foreign matter and coursed with wire brushing fine steel wool scrapers and sand paper complete with ready mixed paint brushing red lead red oxide/Zinc oxide chrome at steel ladder, railing, GI pipes, Flange.

Painting two coats(exclluding priming coat on new steel other metal surface with enamel paint brushing into give an even shade including cleaning the surface of all dirt,dust and other foreign matter enamel paint other than white at GI pipes Flanges, Railings Steel Ladders

White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign mattercomplete in all respect within all leads and lifts.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces ( two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials complete in all respect within all leads and lifts.

Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete complete in all respect within all leads and lifts.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size complete in all respect within all leads and lifts.

Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc. complete in all respect within all leads and lifts.

Sliding door bolts 250x16mm complete in all respect within all leads and lifts..

M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

M.S. tower bolts (Barrel type) leads and lifts. 150x10mm.

M.S. handles 100 mm dia

Providing and fixing of MS round bars(16mm) in windows and ventilators complete in all respect within all leads and lifts.

Stone / Boulder filling under foors / behind retaining walls complete in all respect within all leads and lifts.

Providing and laying cement concrete 1:3:6(One Cement:three Sand: Six graded stone aggregate 40mm.nominal size) and curing complete excluding the cost of form work in foundation and plinth curing complete.

Providing & laying cement concrete1:1.5:3 (1cement :1.5 sand : 3 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-

Foundation,footing,bases of columns and the like and mass concrete.

Columns,pillars posts and struts upto any floor level.

Lintle beam,girders bressumers and cantilevers upto any floor level.

In suspended floor roof landings and shelves and their supports balconies,beam,girders, bressumers and cantilevers.

In Arches(dome etc.) upto any span.

In wall(any thickness but not less than 0.10metre) including attached pillaster-ing buttresses plinth and string courses etc.from top of foundation level uptoany floor level.

In stair cases(except spiral stair cases) excluding landing,butt including pre-paring of the surface and finishing of nosing upto any floor level.

Providing smooth finishing with cement mortar 1:3(One Cement:Three Sand)

Steel work welded in built up section,trusses and framed work including cutting,hoisting,fixing in position and applying a priming coat of red lead paint in gratings,framed guard bar,ladders,railings,brackets and similar work complete in all respects within all leads and lifts as per direction and complete satisfaction of engineer in charge.

Providing and fixing cast iron man hole cover 500mm.internal diametres including frame weight 116Kgs.(The weight of frame 58Kgs.and cover weight 58Kgs.)

Jointing and fixing of G.I. Pipe(M) Class welding of M.S.flanges Table-5 including the cost of nuts,bolts, ferrado make gaskets 4mm.thick complete in all respect of following dias-

inlet pipe 80mm dia

outlet pipe 80mm dia

over flow pipe 80mm dia

scour pipe 80 mm dia

Providing, manufacturing and fixing of G.I.Pipe bend 80mm dia (Medium class)to different degrees including welding of M.S.flange Table-5 at both the endsof bend including the cost of nuts and bolts but excluding the cost of pipes.

inlet pipe 80mm dia

outlet pipe 80mm dia

overflow pipe 80mm dia

scour pipe 80 mm dia

Providing and fixing cast iron Sluice Valves of following dias with hand wheel BIR/ KARTAR class PN 1.00 confirming to BIS 14846-2000 complete in all respect.

For Outlet 80 mm.nominal bore

For scour line- 80 mm.nominal bore

Providing and fixing of M.S. Mosquito proofing ventilators 300mmx300mmx300mm.height.

Providing and fixing of lightening conductors.

Providing and fixing of M.S. Water indicator gauge.

Provision for structural design & drawing

Provision for soil testing report and bearing capacity of soil.

VARINDER SINGH RANA

RANBIR SINGH

Sarbjit Singh Katoch