GENERAL-RM / 2024-25 - RC 2 Phase 2/Zone 2-One Year Running Contract for Various PWD roads under Road Section Kattanam inAlappuzha District-4 Roads Stretches for a length of 12.285km

Amount

Initial Rectification works

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

55.6.a:Providing pre mix bitumen leveling coarse having thickness between 20mm and 40mm with 12mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen (vg 30) with pressure sprayer at the rate of 48 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

OD121341/2024-2025:Dismantling of flexible pavements and sectioning the dismantled materials and re-rolling

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD118604/2024-2025:Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type A) aggregates using viscosity grade bitumen (VG-30) to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three-wheel static roller of 80-100 kN capacity and finishing to required level and grade. By Manual Means.

OD118605/2024-2025:Filling up potholes with bituminous ready mix compound (25 kg bag) and compacting and ramming to get a compact surface including of cost of material, laying charges, transportation to the site etc. complete rate is arrived for a bag of 25kg.

OD121376/2024-2025:Removing the old existing vinyil sticker works on the Display Board of Running Contract and replacing with new vinyil stickers works on the Display Board of Running Contract and replacing with new vinyil stickers,including lettering,symbols and transporting to site etc as per approved drawing and directions of the engineer

Preventive Maintenance works

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD118607/2024-2025:Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type A) aggregates using viscosity grade bitumen (VG-30) to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three-wheel static roller of 80-100 kN capacity and finishing to required level and grade. By Manual Means.

OD121467/2024-2025:Engaging Labour with passenger car not less than 1000cc for conducting and reporting routine inspection for 1km for the entire length of project road at a frequency of 7days through out the agreement period of running contract as directed by Department Officers.

Appx C: Pre Monsoon Works

2.3.1.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Manual Means

OD118609/2024-2025:Engaging wood cutter for removing dangerously overhanging branches of trees.

OD118610/2024-2025:Engaging Coolie for petty works

OD118611/2024-2025:Engaging man-mazdoor for clearing earthen drain and culverts etc.

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

ABU K ZACHARIAH (BID ID -2096898)

Bidder Name

ANISHZACHARIAH

ABU K ZACHARIAH